Search Results:
Search Results:
Search Results:
Search Results:
Learn more by watching our Thermogroup SR69MBN | Straight Round Heated Towel Rail Ladder Brushed Nickel | IP55 video.
Additional related video.
The Thermogroup SR69MBN is a 10 bar electric heated towel rail from the Thermorail range, finished in brushed nickel and measuring 700mm wide by 1200mm high. The SR69MBN draws 128W at 240V to warm and dry towels, and carries an IP55 rating for use in bathrooms and ensuites. Built from 304 stainless steel, it hardwires or plugs in through a 1.8-metre multiflex lead.
Bathroom towels stay damp for hours in cool or humid conditions, and a folded towel left on a hook can hold that moisture into the following day, which encourages mildew and odour. A larger family bathroom or ensuite goes through several towels daily, and a single unheated rail rarely keeps up with the drying demand. The SR69MBN provides 10 heated bars across a 700 x 1200mm ladder frame, so multiple towels dry between uses and remain warm and ready. Operating at 128W, the rail delivers gentle warmth and speeds up evaporation from damp towels through the day.
For the installer, the SR69MBN connects as either a hardwired or plug-in installation through its 1.8-metre multiflex lead, so it accommodates a dedicated circuit or an existing switched outlet. The 304 stainless steel construction and IP55 rating allow it to withstand the steam and splashes typical of a bathroom zone. At 700 x 1200mm the ladder frame occupies a taller wall area and takes a complete set of towels for a busy household. The brushed nickel finish complements contemporary tapware and fittings throughout a renovated bathroom.
The SR69MBN is a 240V electric towel rail that must be installed by a licensed electrician, and it is not a room heater or a substitute for bathroom heating. It has no built-in timer or thermostat, so it runs whenever it is powered unless a separate control is added. It suits indoor bathroom zones rated to its IP55 level, not fully exposed or outdoor locations.
(SR69MBN)
The Thermogroup SR69MBN is a 10 bar electric heated towel rail from the Thermorail range, finished in brushed nickel. It measures 700mm wide, 1200mm high, and 122mm deep, built from 304 stainless steel. The rail warms and dries towels and carries an IP55 rating for bathroom use.
The SR69MBN has 10 straight round bars across a 700 x 1200mm ladder frame, so it holds several towels at once. That makes it suited to a larger family bathroom or ensuite that goes through more towels than a small rail can dry.
The towel rail supports both. It hardwires into a fixed connection or plugs into a switched outlet, using multiflex wiring and a 1.8-metre lead. Your electrician can advise which suits the bathroom layout and the position of the power supply.
Yes. The SR69MBN is a 240V appliance and must be installed by a licensed electrician to meet Australian wiring rules and keep the warranty valid. This applies to both the hardwired and plug-in options, since the connection point still needs correct wiring in a wet area.
Yes. The rail has no built-in timer, so a separate Thermorail timer or thermostat, such as the ET12C eco timer or a TRTS 7-day touch timer, lets you run it on a schedule. A timer cuts running cost by heating the rail only when towels need drying.
The rail draws 128W at 240V, comparable to a couple of light globes, so running cost stays modest even over long periods. The bars warm enough to dry and freshen towels and are warm to the touch in use, rather than reaching a scalding heat.
Yes. The rail carries an IP55 rating, which covers exposure to steam and light splashes in a bathroom zone. It should be positioned according to the wiring rules for wet areas, which your electrician will follow when placing it clear of direct contact with water outlets.
The SR69MBN carries a 7-year warranty for both domestic and commercial use. Warranty claims are handled through Sparky Direct by return, so keep your proof of purchase. As with any electrical appliance, the warranty relies on correct installation by a licensed electrician.
The Thermogroup SR69MBN is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 7 Year
Commercial Use: 7 Year
Warranty Method: Return to Sparkydirect
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | Thermogroup |
| SKU | SR69MBN |
| Model # | SR69MBN |
| Barcode # | 9349970017108 |
| Package Weight | 7.000kg |
| TYPE | VALUE |
|---|---|
| Type | Towel Heater |
| Brand | Thermogroup |
| Range | Thermorail |
| Mounting | Wall Mounted |
| Voltage (V) | 240 |
| IP Rating | IP55 |
| Dimensions (mm) | W700xH1200xD122 |
| Finish | Brushed Nickel |
| Lead Length | 1.8m |
| Output Power (W) | 128 |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.