Clipsal Iconic SD-Baby-VW | Custom Engraved Baby Pictogram Rocker | Vivid White
Now $0.85
$0.77 ex. GST
Search Results:
Search Results:
The custom engravings range is split into five categories. Each one covers a different part of the install, from the switch dolly through to the tools in the van.
Custom dolly engravings are engraved rocker dollies for Clipsal Iconic switches. They come in text and pictogram styles for common locations and loads: lights, fans, exhaust fans, floodlights, hallways and bedrooms. This is also where custom text options sit when a standard label does not suit the circuit.
Custom light switch engravings are engraved switch plates and covers for Clipsal Iconic. They identify each switch at a glance on multi-gang installs in homes, offices and hospitality venues.
Custom mechanism engravings are switch mechanisms with the function engraved on the mechanism itself. They suit any wall plate where several circuits share the same plate and each mech needs its own clear label.
Custom power point engravings mark an outlet with its circuit or purpose. They suit commercial, industrial and home office installs, where knowing which outlet is on which circuit saves fault-finding time.
Custom tool engravings put a permanent mark on trade tools. Engraved gear is easier to identify on shared sites and harder to walk off with when several trades work in the same area.
Engravings come in two styles. The right choice depends on who uses the switch and how many functions sit on the same plate.
| Factor | Text Engraving | Pictogram Engraving |
|---|---|---|
| How it reads | Names the load or room, e.g. LIGHT, FAN, HALL | Shows a symbol, e.g. a bulb, fan or heat icon |
| Best for | Rooms, zones and specific circuits | Common loads on multi-gang plates |
| Language | English wording | Readable regardless of language |
| Typical use | Commercial, switchrooms, labelled zones | Bathroom fan, heat and light combinations |
| Custom option | Custom wording available in the dolly range | Fixed symbols from the standard set |
A three-gang plate running heat lamps, exhaust fan and light is the classic case for engraving. Three blank dollies look identical. Engraved dollies stop the occupant cycling through every switch to find the right one.
New homes often have four-gang and six-gang plates in hallways, kitchens and living areas. Engraved dollies tell the homeowner what each switch does from the day of handover. That means fewer callbacks to explain which switch runs the deck lights.
Offices, cafes and hotels have staff who change often and rarely know the building. Engraved plates and mechanisms let anyone find the right switch for a zone, sign or exhaust system without trial and error.
Engraved power points mark outlets on dedicated circuits, such as server, fridge or equipment outlets. This reduces the chance of someone plugging a heater into the wrong outlet and tripping a critical circuit.
Engraved tools help electricians keep track of gear across multiple jobs. A permanent engraving survives the knocks and solvents that wear off paint pen and tape.
Note: Engraved switch labels identify what a fitting controls for the user. They do not replace the circuit labelling required at the switchboard under AS/NZS 3000:2018.
Engraved parts must match the switch range already on the wall. Check the product listing for the exact range and part before ordering.
Iconic switches use a separate dolly that clips onto the mechanism. This makes the dolly the easiest part to engrave and swap. Engraved dollies sit alongside the standard Clipsal Iconic dollies, and fit the same Clipsal Iconic mechanisms and Iconic grids and surrounds. For the full switch range, see Clipsal Iconic switches and dimmers and Clipsal Iconic power points.
Standard Clipsal switch mechanisms from the 30 series are used across many plate styles. Factory-labelled 30 series mechs cover common loads such as HOB, OVEN and FAN. Custom mechanism engravings cover the functions those factory labels do not.
Existing homes often run Clipsal Classic switches. Confirm the plate and mechanism type on site before ordering engraved parts for a Classic install.
Browse the full Clipsal range for plates, grids and mechanisms to complete the fit-off.
If a job needs a label that is not listed, contact the Sparky Direct team before ordering to confirm what is possible.
Watch Clipsal Iconic 40AR-VW | Blank Dolly Rocker | Vivid White | Single Buy video
Watch Clipsal Iconic 40LR-VW | Light Dolly Rocker | Vivid White | Single Buy video
Watch CLIPSAL 30M | 10Amp Switch Mech (30 Series) 30M-WE video
Took me an hour of running around the house with my wife to work out what the heck half the switches in the house do - we still have a single mystery switch - so if you happen by a house with "Merry Christmas and a Happy 1985" lit up on the roof - please let us know. These "Dolly Rocker" help enormously to keeping that straight in my head.
Great little rocker to fit into light switches. Great when you've got multiple switches all together that do different things (like a fan heat light). Makes it easy to know what is what without the ugly labels of old!
Awesome backlight, bright enough to find in the dark and not distracting in low light. Took the liberty of getting the icons for the switches which are also perfect for when family and friends visit.
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Custom Engravings → Get Expert Advice →Custom engravings are genuine Clipsal Iconic components (dollies, switch plates, mechanisms, and power point outlets) that have been laser engraved with a room name, function word, or pictogram before they leave the factory or engraving bench. The label is part of the fitting itself, not a sticker or printed insert, so it cannot peel, fade, or rub off. The result is a permanent, professional identification that looks like part of the original fit-out.
These are three separate parts of a Clipsal Iconic switch assembly:
Dolly (rocker): The visible rocker face that you press to operate the switch. Engraved dollies replace the blank rocker with a labelled one.
Mechanism: The functional switching unit that sits behind the dolly inside the grid plate. Engraved mechanisms have the identification built into the mechanism body itself.
Switch plate (skin): The decorative cover frame that clips over the grid. Engraved switch plates carry the label on the plate surround rather than on the individual rocker.
For most residential installs, engraved dollies are the simplest option because they clip on in seconds with no wiring. Engraved mechanisms suit jobs where the identification needs to be visible even with the skin removed.
All products in this range are designed for the Clipsal Iconic platform. The engraved dollies and mechanisms are compatible with Clipsal Iconic complete switches, Clipsal Iconic grid plates fitted with individual Iconic mechanisms, and the Clipsal Iconic STYL and Essence ranges (same mechanism platform). They do not fit Clipsal Classic, 2000 Series, or Saturn mechanisms. Always confirm the switch series before ordering, particularly on older installs where more than one series may be present.
Engraved text shows a word (Bathroom, Cooker, Deck, Hallway). Best for named rooms, appliances, and isolation switches. English only, but unambiguous.
Pictogram shows an icon (fan, light bulb, blinds arrow, bath). Recognised at a glance, works regardless of language, suited to multilingual sites and rentals.
Many installs mix both styles on the same plate: a pictogram for the light and fan, and a text dolly for the circuit that needs a precise name.
Yes. The design-your-own custom text dolly option lets you specify the exact wording to be laser engraved on a genuine Clipsal Iconic rocker. This covers labels that no ready-made range includes: Pool Pump, Granny Flat, Shed, Fish Tank, or the name of a specific machine on a commercial site. Keep the wording short — a dolly face is small, and one or two short words engrave larger and read better than a long phrase.
Swapping a dolly is a clip-on change to the switch face with no wiring involved, so it does not require a licensed electrician. The process takes under a minute per gang: unclip the Iconic cover plate skin, lever the blank dolly off the mechanism, press the engraved dolly on until it clicks, refit the skin and test. Any work behind the plate (adding mechanisms, altering circuits, or replacing switch assemblies) is licensed electrical work under AS/NZS 3000:2018 and must be carried out by a licensed electrician.
Multi-gang plates: Bathroom banks running light, fan, heat, and towel rail. Engraving each rocker ends the trial-and-error guessing.
Sensor and automated circuits: A dolly engraved "Sensor" tells occupants to leave the switch on.
Cooker, hot water, and isolation switches: Faster to identify during a fault.
Commercial sites: New staff have no site knowledge. Labelled switches prevent equipment circuits from being turned off by mistake.
Rental and short-stay properties: Tenants arrive without a site walkthrough. Engraved dollies carry the identification through every tenancy change.
Engraved dollies are sold as singles. Each job gets only the labels it needs, with no leftover icon packs. Singles are also easy to line-item on a quote. The range covers more than 160 engraved options across room names, appliances, and pictograms, plus the custom text option for anything not listed.
No. The label is laser engraved into the dolly face rather than printed or applied as a sticker, so it cannot peel, fade, or rub off. The engraving stays legible for the life of the switch, including on high-use plates in kitchens and bathrooms where adhesive labels typically fail within months.
Engraved dollies and components in this range are available in Vivid White and Extra Black. On a matching Clipsal Iconic plate, the finish reads as part of the original fit-out. Engraved dollies can also sit behind a coloured Iconic skin plate cover for a deliberate two-tone look that makes the labelled switches stand out visually.
The custom engraving service in this range is specific to Clipsal Iconic. Other platforms handle identification differently: Hager supplies factory-engraved mechanisms such as HOB rockers for the Silhouette range; Tesla uses an oversized rocker to aid identification; HPM, DETA, and Trader rely mainly on printed mechanism caps and marked mechanisms. For Iconic installs, the engraved range at Sparky Direct offers the widest label selection, plus the custom text fallback for anything not covered.
Yes. All custom engraved products are available online at Sparky Direct with Australia-wide delivery to any state or territory, including regional areas. Orders placed before 12pm QLD time on business days are dispatched the same day from the Caboolture warehouse. All products are 100% genuine, brand-new, and sourced from authorised suppliers, with full manufacturer's warranty and Sparky Direct's 100-Day Fuss-Free money-back guarantee.