SAL | LED Wideline Diffused Batten 18/36W 1m | 3000/4000/5700K Tri-Colour Selectable
The SAL SL9733-212TC-DP is a 1-metre LED wideline diffused batten rated 240V, with selectable output of 18W or 36W. The SL9733-212TC-DP uses a pressed steel base and an opal polycarbonate diffuser to spread even light along its length. The batten offers selectable colour temperatures of 3000K, 4000K, and 5700K, plus an IP20 rating for indoor use.
Ageing fluorescent battens produce patchy, uneven illumination across ceilings in units, garages, and commercial service spaces. The SL9733-212TC-DP replaces them with a diffused LED fitting that spreads consistent brightness end to end. Its selectable 18W or 36W output and three colour temperatures let one fitting suit different rooms without carrying several stock codes.
Licensed electricians reach for the SL9733-212TC-DP because one fitting covers several jobs: the selectable wattage and CCT settings on the driver cut the number of codes carried on the van. The large terminal block and low-profile body make it fast to wire in on ceilings and open service runs. For fluorescent upgrades, it drops in as a clean LED replacement that lifts light output and reduces ongoing maintenance.
Features
- Selectable colour temperature — switch between 3000K, 4000K, and 5700K on the fitting to match warm, neutral, or cool lighting needs.
- Selectable wattage — choose 18W or 36W output from the same SL9733-212TC-DP to trade brightness against energy use.
- High-output LED optics — deliver up to 3900 lumens at the 36W setting with a CRI above 80 for accurate colour rendering.
- 120-degree beam spread — the opal polycarbonate diffuser softens glare and spreads light evenly across the area below.
- Constant-current LED driver — the integral driver runs the LEDs at steady output for consistent light with no flicker.
- Non-dimmable operation — the SL9733-212TC-DP runs at fixed output and is not compatible with dimmer circuits.
- Pressed steel base — the wide steel body carries the LED board and diffuser as a single low-profile housing.
- White powder-coated finish — the painted steel base blends into most ceilings and resists surface marking.
- Large terminal block — the wiring terminal takes mains conductors directly for straightforward connection on site.
- IP20 rating — rated for dry indoor areas only, not for damp, wet, or exposed outdoor locations.
- 1-metre length — the 1145mm body suits standard batten runs in hallways, garages, and utility rooms.
Where to use
- Apartments and units — the SL9733-212TC-DP suits low ceilings in flats where a slim batten gives broad, even light.
- Garages and workshops — the 36W setting lights work areas and benches with bright, glare-controlled output.
- Laundries and utility rooms — the diffused batten replaces old fluorescent fittings in small dry service spaces.
- Hallways and stairwells — the 1-metre body runs along corridors and landings for continuous even lighting.
- Commercial service spaces — plant rooms, back-of-house, and storage areas where clean, low-maintenance lighting matters.
- Retail and office corridors — the selectable CCT lets the SL9733-212TC-DP match the existing colour temperature on a floor.
- Storerooms and pantries — the batten provides bright task light across enclosed dry storage areas.
The SL9733-212TC-DP carries an IP20 rating and is not suitable for damp, wet, or exposed outdoor locations. Do not install it in bathrooms over showers, external eaves, or any area open to rain or splash. The driver is non-dimmable, so it should not be wired to a dimmer circuit.
Verified Sparky Direct customer reviews: SAL SL9733-212TC-DP LED Wideline Diffused Batten 18/36W (SL9733-212TC-DP)
"Quick to install, very good quality for price." — Scott
"The SAL batten lamp has great brightness and homogenous light over the length." — JT
"I replaced my old Fluorescent lights with these LED lights" — Brizza
