Skip to main content
Get FREE SHIPPING, BUGLE SCREW BOX and $35 PREZZEE when you shop Clipsal this September! Learn More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Sterling 29-720P | 200mm Pink Black Panther Long Industrial Snips | Stainless Steel video.

        Additional related video.

        Additional related video.

        Sterling | Black Panther Long Cut Industrial Snips 200mm | 420J2 Stainless Steel, Limited Edition Pink

        The Sterling 29-720P is a 200mm industrial snip with Japanese 420J2 stainless steel blades and a serrated cutting edge. The blades take light gauge wire and cable up to 2.5mm, and a single-handed lock opens and closes the snip in one hand. The 29-720P sits in the Sterling Black Panther Limited Edition Pink range, and $2 from every pair sold goes to the McGrath Foundation.

        Trimming cable ties, sheath and cardboard with a utility knife means an open blade in the hand every time. Sterling specifies the 29-720P as a knife replacement tool, so that trimming work is done with a locking snip instead. The anti-slip serrated edge holds the material rather than skating off it.

        Adhesive, flux and solvent are hard on a hand tool. The acid and solvent resistant TPR handles stand up to that contact, and the 420J2 stainless steel blades resist corrosion in a damp pouch. Sterling covers the 29-720P for the lifetime of the product against defects in materials and workmanship.

        Features

        • Japanese 420J2 stainless steel — the blades are ground from 420J2 stainless, which holds an edge and resists corrosion.
        • Serrated anti-slip edge — the serrated blade grips the material instead of sliding along the cut line.
        • Long cut blades — the 29-720P uses a long cut blade profile for extra reach through a single stroke.
        • Wire cutter to 2.5mm — the cutter notch takes light gauge wire and cable up to 2.5mm, not heavier conductors.
        • Single-handed lock — the lock opens and closes the 29-720P in one hand, leaving the other hand on the work.
        • Ambidextrous soft grip — the handles suit left or right hand use with a soft grip on both sides.
        • Acid and solvent resistant TPR — the TPR handle material resists acid and solvent contact on the job.
        • Lanyard attachment holes — holes through the handles take a lanyard or tether.
        • Resistance free mechanism — the pivot runs smooth through the stroke for easier, more precise cutting.
        • Knife replacement tool — Sterling specifies the snips as a knife replacement for trimming work.
        • Limited Edition Pink — the handles are finished in pink as part of the Sterling Limited Edition Pink range.
        • Lifetime warranty — Sterling covers the snips for the lifetime of the product against defects in materials and workmanship.

        Where to use

        • Sheet material work — the 29-720P is specified for tough sheet materials where a serrated edge is needed to hold the cut.
        • Electrical trimming — cutting light gauge wire and cable to 2.5mm, plus cable ties, sheath and heat shrink.
        • Food processing — Sterling lists food processing work, where stainless blades take a wash down.
        • Household and hobby — household tasks, hobby work and lifestyle projects around the home and shed.
        • Tethered carry — the lanyard holes let the snips run on a tether in a pouch or off a harness.

        The 29-720P cuts light gauge wire and cable to 2.5mm, so it is not a heavy cable cutter and not a bolt cutter. The blades are ground for sheet and light gauge material, not for hardened or high-tensile steel. The snips carry no insulation rating and are not for work on or near live conductors.

        (29-720P)

        The Sterling 29-720P is a 200mm industrial snip with Japanese 420J2 stainless steel blades, a serrated anti-slip edge and a long cut blade profile. The handles are acid and solvent resistant TPR with a lanyard hole in each. The snips sit in the Black Panther Limited Edition Pink range.

        The 29-720P handles tough sheet materials, and the cutter notch takes light gauge wire and cable up to 2.5mm. The serrated edge holds the material through the cut rather than sliding along it. Heavier conductors and hardened steel are outside what the snips are ground for.

        Yes. A single-handed lock opens and closes the snips, so the other hand stays on the work. The mechanism runs resistance free through the stroke, and the handles are ambidextrous, so the lock works the same way in either hand.

        The handles are TPR, a soft grip material that resists acid and solvent contact. They are shaped for either hand and carry a lanyard attachment hole so the snips can run on a tether in a pouch or off a harness.

        Sterling specifies the snips as a knife replacement tool for trimming work such as cable ties, sheath, heat shrink and packaging. The blades lock closed when not in use, so there is no exposed blade in the hand or loose in the bag.

        Sterling covers the snips for the lifetime of the product from the date of purchase against defects in materials and workmanship. Normal wear and tear is excluded, so blade dulling from use is not a warranty claim. Claims go back through the store of purchase with proof of purchase.

        Yes. Sterling donates $2 from every pair sold in the Limited Edition Pink range to the McGrath Foundation, which funds McGrath Cancer Care Nurses across Australia.

        The snips cut light gauge wire and cable to 2.5mm, so they are not a cable cutter for heavier conductors and not a bolt cutter. The blades are ground for sheet and light gauge material, not hardened or high-tensile steel. They carry no insulation rating and are not for live work.

        The Sterling 29-720P is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Sterling
        SKU 29-720P
        Model # 29-720P
        Barcode # 9341202065406
        Package Weight 0.173kg
        TYPE VALUE
        Type Tools
        Type Industrial Snips
        Brand Sterling
        Range Black Panther Limited Edition Pink
        Colour Pink
        Length (mm) 200
        Material 420J2 Stainless Steel

         

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products