Search Results:
Search Results:
Learn more by watching our Major Tech MT1003 | 1000V AC/DC True RMS Multimeter video.
The Major Tech MT1003 is a heavy-duty True RMS digital multimeter rated to 1000V AC and DC, built for industrial electrical testing. The MT1003 carries a CAT IV 600V and CAT III 1000V safety rating to IEC61010-1, with a 6000-count TFT colour display. It combines built-in data logging and Trend Capture, so intermittent faults are recorded automatically for later review.
Intermittent faults on plant and control circuits are hard to catch with a meter that only shows a live reading. The MT1003 records events unattended through data logging and Trend Capture, so a dropout that occurs overnight is still on the screen in the morning. Its peak capture down to 500 microseconds holds fast transients that a standard averaging meter misses.
Electricians and technicians working on industrial gear value an instrument that logs as well as measures. The MT1003 combines True RMS accuracy, a 6000-count TFT display, and 4-20mA process loop measurement in one double-moulded handheld unit. Minimum, Maximum, and Average values carry a time stamp, so a recorded fault ties back to the moment it occurred. A single rechargeable pack sustains a full day of site testing.
The MT1003 is a measurement multimeter, not an installation compliance instrument. It does not determine insulation resistance, earth loop impedance, or residual-current trip times, and it cannot certify a circuit against those requirements. Do not exceed the CAT IV 600V and CAT III 1000V category limits, or connect the meter beyond its stated input ranges.
(MT1003)
The MT1003 is rated CAT IV 600V and CAT III 1000V to IEC61010-1. That covers measurement at the distribution and installation level, including switchboards and supply-side circuits on industrial and commercial sites.
True RMS gives an accurate reading on distorted and non-linear waveforms, such as those from variable speed drives and switch-mode power supplies. An averaging meter can under-read these signals, which True RMS avoids.
Yes. Data logging with Trend Capture records events unattended, so an intermittent dropout is stored for later review. Peak capture holds transients as fast as 500 microseconds, and Min, Max, and Average values carry a time stamp.
The MT1003 measures AC and DC voltage to 1000V, current to 10A, resistance, frequency, capacitance, duty cycle, and temperature from -40C to 1350C. It also reads 4-20mA process loops and includes continuity and diode test.
The MT1003 runs on a 7.4V rechargeable battery, with a low-battery indication shown on the display. Recharge it between jobs so it stays ready for a full day of site testing.
The MT1003 carries a 2-year warranty for both domestic and commercial use, on a return-to-Sparky Direct basis. Faulty units are forwarded to Major Tech's authorised service centre for inspection, testing, and calibration.
No. The MT1003 is a measurement multimeter, not an installation compliance instrument. It does not measure insulation resistance, loop impedance, or RCD trip times, and must stay within its CAT IV 600V and CAT III 1000V limits.
The Major Tech MT1003 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 2 Year
Commercial Use: 2 Year
Warranty Method: Return to Sparky Direct
All Major Tech Meters sold through Sparky Direct are covered by the manufacturer’s warranty. If you believe your meter is faulty or defective, you may request an assessment under this warranty policy.
To initiate a warranty claim:
Return to Sparky Direct
Ship the meter back to Sparky Direct along with:
Please ensure the unit is securely packaged to prevent damage in transit.
Forwarded for Assessment
Upon receiving your meter, we will forward it to Major Tech’s authorised service centre for inspection, testing, and calibration.
Major Tech’s service lab will assess the returned unit to determine:
As Major Tech’s service labs are independent providers, Sparky Direct cannot govern or guarantee turnaround times or any costs incurred for repairs outside of warranty coverage.
| Function | Range | Resolution | Accuracy |
| DC Voltage | 600mV – 1000V | 0.1mV | ±(0.1% + 5d) |
| AC Voltage | 600mV – 1000V | 0.1mV | ±(0.9% + 5d) |
| AC + DC TRMS Voltage | 6V – 1000V | 0.1mV | ±(3.0% + 20d) |
| DC Current | 600μA – 10A | 0.1μA | ±(0.9% + 5d) |
| AC Current | 600μA – 10A | 0.1μA | ±(1.2% + 5d) |
| Duty Cycle | 0.1 to 99.90% | 0.0001 | ±(1.2% + 2d) |
| Resistance | 600Ω – 60MΩ | 0.1Ω | ±(0.8% + 5d) |
| Frequency | 60Hz – 1MHz | 0.01Hz | ±(0.09% + 5d) |
| Capacitance | 60nF – 10mF | 0.01nF | ±(1.5% + 8d) |
| Temperature | -40 to 1350°C | 0.1°C | ±(1.2% + 3d) |
| True Rms Measurements | AC | ||
| Ac Bandwidth | 50Hz to 1000Hz | ||
| Digital Display | 6000 TFT | ||
| Bargraph | Yes | ||
| Records Events and Trends | Yes | ||
| Data Logging | Yes | ||
| Continuity | Yes | ||
| Diode Test | Yes | ||
| Overrange Indication | Yes | ||
| Input Impedance | >10MΩ VDC & >9MΩ VAC | ||
| Min Max | Yes | ||
| Peak Hold | 1ms | ||
| Enclosure | Double moulded | ||
| Low Battery Indication | Yes | ||
| Power Source | 7.4V rechargeable | ||
| Dimensions | 170 x 79 x 50mm | ||
| Safety Specs | IEC61010-1 CAT IV 600V | ||
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | Major Tech |
| SKU | MT1003 |
| Model # | MT1003 |
| Barcode # | 6008229027642 |
| TYPE | VALUE |
|---|---|
| Type | Multimeter |
| Brand | Major Tech |
| Power Source | 7.4V Rechargeable Battery |
| Dimensions | 170 x 79 x 50mm |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.
$38.45 $34.95 ex. GST
$493.90 $449.00 ex. GST
Now $236.50 $250.00 ex. GST
$163.90 $149.00 ex. GST
$423.50 $385.00 ex. GST
$174.90 $159.00 ex. GST
$150.70 $137.00 ex. GST
$559.90 $509.00 ex. GST
