Search Results:
Search Results:
Search Results:
Search Results:
The Clipsal TPDL1C3 is a 7 W tri-colour, dimmable LED downlight with selectable 3000 K/4000 K/6000 K, designed for quick installation in Australian homes and renovations. It's IC-4 rated for insulation contact, IP44-rated front, and compliant with AS/NZS. Get it now from Sparky Direct with fast delivery and great prices.
The unit integrates an LED module and driver with a rear tri-colour switch, allowing selection of 3000 K, 4000 K or 6000 K at installation. It fits a standard 90 mm ceiling cut-out and installs neatly using existing flex-and-plug or fixed wiring by a licensed electrician.
| SKU | TPDL1C3 |
| Wattage | 7 W |
| Lumen Output | ≈ 750 lm |
| Colour Temperature | Selectable 3000 K / 4000 K / 6000 K |
| Cut-out Diameter | 90 mm |
| Trim Diameter | 110 mm |
| Mounting Depth | 55 mm |
| Beam Angle | 90° |
| IP Rating | IP44 (front) |
| Insulation Rating | IC-4 |
| Warranty | 3 years |
All fixed wiring work in Australia must be done by a licensed electrician. The TPDL1C3 is RCM-compliant and meets AS/NZS standards. The IC-4 rating allows safe insulation contact.
Refer to: Clipsal CLITPDL1C3 White LED Downlight
Get the Clipsal TPDL1C3 LED downlight with fast delivery and professional support.
Shop Now at Sparky DirectThe Clipsal TPDL1C3 is a 7 W tri-colour dimmable LED downlight with selectable 3000 K, 4000 K, or 6000 K light. It’s designed for 90 mm ceiling cut-outs and suits most home and renovation installs in Australia. Available at trade prices, with same-day dispatch at Sparky Direct.
Yes. The TPDL1C3 meets AS/NZS requirements and carries RCM compliance for safe use in Australian electrical installations.
Yes, the unit is IC-4 rated, meaning it can safely be covered with insulation without risk of overheating.
The front of the fitting is rated IP44, suitable for damp indoor zones and some covered outdoor areas.
The front of the fitting is rated IP44, suitable for damp indoor zones and some covered outdoor areas.
The downlight delivers around 750 lumens with a wide 90-degree beam for even lighting coverage.
Yes. It’s fully dimmable when used with compatible LED dimmers that support trailing or universal control types. Use the 42ELEDM2-VW Dimmer
It fits a 90 mm ceiling cut-out, has a 110 mm trim diameter, and requires roughly 55 mm mounting depth.
Sparky Direct supplies the Clipsal TPDL1C3 with the manufacturer’s 3-year warranty, ensuring peace of mind for both trades and homeowners.
Yes, there’s a switch on the back that lets you pick warm (3000 K), neutral (4000 K), or cool (6000 K) white before installation.
Yes, the IP44 front makes it fine for damp indoor zones and covered outdoor spots — just not where it’s exposed to heavy rain.
Its 7 W LED output is roughly equal to a 50 W halogen, giving good general lighting with much lower power use.
Each TPDL1C3 includes the LED fitting and integrated driver, ready for a licensed electrician to connect.
It’s quick to fit, tri-colour selectable, fully compliant, and reliably stocked by Sparky Direct with same-day dispatch options.