Search Results:
Search Results:
Search Results:
Search Results:
A quad power point is a 4-gang GPO that mounts as a fixed wall fitting. It sits in one mounting position and presents four switched 240V socket outlets on a single faceplate. Australian electricians, wholesalers, builders and trade buyers use a handful of names for the same product: quad power point, quad GPO, quad socket outlet, 4-gang GPO, quad outlet and 4-way power point. The letters GPO stand for General Purpose Outlet.
This category suits any location where multiple devices need mains power from one wall position. The quad format reduces the need for plug-in adaptors and power boards, provided the supply circuit can handle the combined load.
Quad power points sold for the Australian market carry four sockets in the standard Type I plug pattern under AS/NZS 3112. Each outlet is typically rated at 250V AC / 10A, subject to the specific product datasheet and the supply circuit. Compliant products carry the Regulatory Compliance Mark (RCM). A quad GPO is a fixed electrical fitting, not a portable power board, and forms part of the building's permanent wiring.
A single GPO presents one outlet, a double presents two, and a quad presents four. The quad plate is wider than a double, which matters when the wall space is tight next to joinery, splashbacks, architraves or skirting. A quad outlet reduces visible clutter where several devices are used together in one spot, so a single neat wall plate replaces a tangle of adaptors. The trade-off is plate width and the need to confirm the supply circuit can carry the total connected load.
Quad GPOs work well in any location where several mains-powered devices cluster in one spot. Common Australian applications include home offices, media walls, entertainment units, kitchens, laundries, garages, bedrooms, commercial counters, AV racks and workbenches. The fixed format reduces reliance on plug-in power boards when the wall positions are planned correctly. The number of outlets does not, on its own, increase circuit capacity, so high-draw appliance clusters still need a load assessment by a licensed electrician.
A quad GPO behind a desk handles a monitor, laptop charger, router, printer, speakers and a phone charger from one wall position. In a media wall, a quad outlet can run the TV, soundbar, streaming device, gaming console and one spare slot for a charger or lamp. Cable management is cleaner because each device plugs straight into the wall plate, with no adaptor stack hanging off a double GPO. The quad format suits work-from-home upgrades and AV planning during renovations.
Quad outlets are useful where several low-to-medium draw devices run from one bench or wall. Kitchen examples include a toaster, kettle adjacent, blender, coffee machine and small appliance area. Garages and workbenches often run a charger bank, a desk lamp, a power tool charger and a fan from a single quad GPO. High-draw appliances such as kettles, heaters, dryers and large power tools should be load-checked before they share an outlet bank. Appliance-heavy and workshop areas usually need an electrician to confirm the circuit can carry the combined demand.
Commercial use cases include point-of-sale equipment, tablet chargers, label printers, EFTPOS terminals, display gear and small communications equipment. AV racks and reception desks often consolidate several devices behind a single quad outlet to keep cable runs tidy. Trade buyers and contractors order in volume to keep finish and switching style consistent across an entire fit-out. High-density outlet areas need careful circuit planning because the headline 10A rating per socket does not equal four times 10A across the bank.
The most important rule for a quad GPO is that the per-outlet rating is not the same as the circuit rating. Each socket can supply up to 10A within its design limits, but the combined load across all four outlets is capped by the protective device on the final sub-circuit and the cable feeding it. A typical Australian general power circuit is protected by a 16A or 20A circuit breaker, which sits well below the theoretical maximum of four full 10A draws at once. Circuit design and maximum demand must be assessed by a licensed electrician, not estimated from the outlet count.
The 10A rating per outlet means each socket can supply a standard plug-top appliance up to that limit. Typical low-draw devices include phone chargers, routers, modems, TVs, monitors, lamps, laptop chargers and small kitchen electronics. These items together rarely come close to overloading a quad GPO on a healthy general power circuit. The total connected load across the bank is what matters, not the socket count.
A quad power point is not a substitute for a dedicated high-current circuit. Running a kettle, a portable heater and a dryer on the same quad outlet bank can easily exceed the circuit's safe limit. Sustained overload trips the breaker at best and overheats wiring at worst. High-load areas such as commercial kitchens, hot-desk hubs and workshop benches should be reviewed by an electrician. The fix may be an additional sub-circuit, a 15A power point for a single heavy appliance, or a different outlet strategy.
The honest answer is "as many as the connected load allows, not just four". A quad outlet physically accepts four plugs, but the deciding factor is the sum of currents drawn at any one time. Check the rating plate on each appliance and avoid running multiple high-current items together. For appliance-heavy plans, ask a licensed electrician to confirm the circuit can carry the projected load before fitting the quad. The same logic applies to 10A power points in general.
Quad GPOs come in several configurations to suit different rooms, finishes and switching requirements. The main variants are standard single pole switched, double pole switched, neon indicator, slimline and USB-integrated. Stocked Australian brands include Clipsal (Iconic, Classic and Saturn ranges), Trader (Puma series), NLS, Connected Switchgear and Mercator Ikuu for smart Zigbee quads. Outdoor-rated quad outlets are uncommon, so weatherproof areas typically use multiple single or double weatherproof GPOs instead.
Single pole switched quad outlets are the standard residential and commercial choice. Each of the four sockets has its own switch that breaks the active conductor when off. This format suits general indoor applications when installed on a compliant circuit. Common examples include the Clipsal Iconic 3015-4VW in vivid white and the Clipsal Classic C2015D4 range in white or black.
Double pole switching isolates both the active and neutral conductors when the switch is off. This format suits caravans, relocatable buildings, marine fit-outs, remote-area builds and selected commercial contexts where full isolation is specified. Australian buyers will recognise the Trader Puma PUBIG4 and the NLS 30455 as widely stocked double pole quad GPOs. Confirm whether double pole is required for the application with a licensed electrician, since residential fit-outs often default to single pole.
Neon indicator quads carry a small illuminated LED or neon next to each switch to show outlet status at a glance. The visual cue suits AV racks, equipment cupboards, retail counters, server rooms and commercial desks where checking each socket by touch is impractical. The NLS 30435 Quad Power Point with double pole and neon indicators is one stocked option. Standby power draw from indicator LEDs is negligible.
Slimline quads suit modern interiors, home offices, media walls and visible fit-outs where plate depth and bezel size matter. The Connected Switchgear PO410-L 4-gang slimline power point is one example, and the Clipsal Iconic 3015-4VW also reads as a flat, modern plate. Match the quad finish to existing switches and power points in the room for a consistent look. Check exact plate dimensions before ordering for tight architrave or splashback positions, particularly in kitchens. The Clipsal Saturn 4025H2-PW in pure white is a popular premium-finish option.
USB-integrated quads combine mains outlets with USB charging ports on the same plate. The Trader Puma PU4X4 carries 4 x 10A sockets plus 4 x 3.1A USB-A outlets. The Trader Puma PU4X4AC adds USB Type-C alongside USB-A for newer devices. USB ports are for low-voltage charging only, not for running appliances. USB power points with Type-C are increasingly the default for bedrooms, desks, hospitality rooms and home offices because most modern phones, tablets and laptops have shifted to USB-C.
A quad GPO is physically wider than a double, which changes what fits in a given wall location. Standard Australian quad plates are typically around 198 to 200mm long, but always check the exact datasheet for the model in question. Mounting depends on the wall box, plate width, cavity depth and the existing cable arrangement. Many quads can be specified as an upgrade from a double power point location where space and wiring suit, but the work is licensed electrical work in every Australian state and territory. Trade buyers planning bulk orders should confirm dimensions and mounting style against the project drawings before placing the order.
Most Australian quad plates measure approximately 198 to 200mm long, give or take a few millimetres. Always confirm dimensions on the product datasheet, since slimline and premium ranges vary. Wall clearance matters near joinery, splashbacks, architraves, skirting, vanities and built-in furniture. A quad that fits the wall in isolation may still clash with cabinetry, so measure the available run before committing.
Most stocked quad GPOs are designed around standard Australian mounting conventions, but fit depends on the wall box, depth, plate width and existing cable. The electrician should confirm whether an existing location can accept a quad plate before ordering. Surface-mount quad outlets paired with a mounting block suit conduit, workshop, caravan and retrofit applications where cutting a new wall opening is not viable. For plasterboard retrofits without a stud, a plaster bracket can secure the quad mechanism to the sheet.
A double GPO can often be upgraded to a quad if the wall space, wall box, wiring and circuit capacity all suit. The plate width must clear adjacent surfaces, the existing cable must support the new arrangement, and the supply circuit must handle the expected load. Replacement is electrical work and must be done by a licensed electrician. The electrician will check polarity, earth continuity and circuit protection after fitting. For surface installations, surface sockets on a matching mounting block are a common path.
The two most common alternatives to a quad GPO are a portable power board plugged into a double, or two double GPOs installed at different locations. Each option has a different trade-off in safety, cable tidiness, circuit flexibility and installed cost. A quad GPO is a planned, fixed solution. A power board is a temporary, portable one. Two double GPOs spread across two wall positions offer more flexibility for separating loads onto different circuits but cost more to install and use more wall space.
A quad GPO is a fixed wall outlet. A power board is a portable adaptor that plugs into an existing GPO. The quad option keeps cabling neat, removes the daisy-chain risk and avoids the visible board sitting on the floor. It is still capped by the same upstream circuit, so the safety advantage is mostly about reducing trip hazards, eliminating overloaded boards and providing a permanent solution for a permanent device cluster. Choose a quad GPO where the device cluster is staying put.
A standard quad outlet prioritises four 240V sockets. A USB power point trades some mains sockets for fast-charging USB ports. Hybrid quad-plus-USB models combine both on one plate, which suits bedrooms, desks, hospitality rooms and home offices. USB-C is increasingly preferred because modern phones, tablets and laptops have moved off USB-A. Pick the layout that matches the actual device mix in the room, not the largest possible socket count.
One quad consumes a single wall position and creates a tidy bank of four outlets close together. Two doubles spread across two positions create separation between device groups and can be assigned to different sub-circuits if the design needs greater load flexibility. The best choice depends on the wall layout, the expected loads, finish requirements and the electrician's circuit design. Quads usually win on tidiness and install time, doubles win on load separation.
Quad GPOs sold for installation in Australia must meet AS/NZS 3112 for plug and socket-outlet dimensions, and they must be installed under the rules of AS/NZS 3000. Compliant products carry the Regulatory Compliance Mark (RCM). Final sub-circuits feeding general power outlets must carry RCD protection in line with the current Wiring Rules. Installation, replacement, and any alteration of fixed power points is licensed electrical work in every Australian state and territory, and DIY wiring on fixed outlets is illegal.
AS/NZS 3112 covers the dimensions, materials and performance of plugs and socket-outlets used in Australia and New Zealand. Quad power points fitted in this market must comply with this standard and should carry the Regulatory Compliance Mark. Uncertified imported products that do not carry the RCM should not be installed, because they may not meet local safety and dimensional requirements.
AS/NZS 3000, commonly called the Wiring Rules, sets the framework for circuit design, cable sizing, protection devices, maximum demand and RCD protection. The number of socket outlets at a wall location does not replace a proper circuit calculation. An electrician will check that the existing sub-circuit can support the quad's likely load and that a safety switch covers the circuit. Periodic testing with a power point tester can flag polarity and earth issues on existing outlets.
Yes. Installation, replacement or alteration of any fixed power point in Australia is licensed electrical work. DIY wiring of a quad GPO is illegal and unsafe. A licensed electrician will isolate the circuit, fit the mechanism, terminate the conductors correctly and test polarity, earth continuity and RCD operation before re-energising the outlet. This is not a homeowner job, even where the existing wiring looks straightforward.
Quad GPO selection comes down to application, expected load, fitment, finish and brand consistency with the rest of the install. Trade buyers also weigh certification, datasheet availability and bulk stock. A short checklist helps avoid mismatched plates, surprise wall-space conflicts and finish clashes once the page goes from spec to install. The brief stays the same across residential, commercial and trade projects: select a compliant product that suits the room, the load and the wider switch range already in use.
For a residential or home-office quad, work through the following before ordering. How many devices will plug in, and what are their nameplate ratings? Is the load mix mostly low-draw or does it include a heater or kettle? What plate finish matches the existing switches, and is the wall position wide enough? Is USB charging required, and if so, USB-A, USB-C or both? Confirm the licensed electrician is available before buying, since the install date drives the order.
Trade selection adds project-scale considerations on top of the residential checklist. Confirm certification, RCM compliance and the manufacturer datasheet. Match the quad finish, switch action and brand to the rest of the build for visual consistency. Verify stock depth for bulk orders so the project does not stall mid-fit-out. Check the quad mounts to the standard Australian wall box being used on the site. For larger jobs, lock in one supplier so all units come from a single batch and finish.
The brands carried at Sparky Direct in the quad format include Clipsal, Trader, NLS, Connected Switchgear and Mercator. Clipsal covers the Iconic, Classic and Saturn ranges. Trader supplies the Puma series, including USB-integrated models. NLS offers Classic Style quads in single pole, double pole and neon indicator versions. Connected Switchgear provides a slimline 4-gang option, and Mercator delivers smart Zigbee quads in the Ikuu range. For wider brand context, Sparky Direct also stocks Hager Allure power points and Legrand power points in other formats, with the quad option strongest in the Clipsal, Trader and NLS lines. No single brand is universally "best", so prioritise certification, finish match and stock availability.
Before ordering a quad power point online, check the per-outlet rating, switch type (single or double pole), plate colour, dimensions, certification, quantity and delivery location. Electricians and contractors often order quads in bulk for kitchen renovations, apartment fit-outs and commercial projects, and a single supplier keeps finish and switching consistent across the site. Sparky Direct is an Australian online electrical wholesaler with trade-friendly product listings, clear specifications and Australia-wide delivery options.
Single quad units suit small upgrades, replacement of a single damaged outlet or a one-off home office build. Bulk quad orders suit full renovations, multi-unit apartment projects, office fit-outs and trade van re-stocks. For bulk orders, confirm one consistent model number, finish and switch type to avoid mid-project mismatches. Check stock depth in advance for large quantities.
Compare quad GPOs on like-for-like terms: certification, brand, switch action, plate finish, neon indicator presence, USB integration and pack quantity. Cheapest is rarely the right call when compliance, durability or datasheet support is unclear. Trade buyers should factor in stock depth, delivery reliability and total landed cost rather than the unit price alone. The broader electrical power points category is the starting point if a quad does not suit and a different format is required.
A correctly installed quad GPO needs little day-to-day maintenance, but high-use locations wear faster than light-use ones. Periodic visual checks pick up cracks, scorch marks, discolouration and loose sockets before they become safety issues. Replacement of any damaged or failing quad outlet is licensed electrical work. Commercial sites with heavy daily use should include quad outlets in their routine inspection schedule.
Watch for loose plugs, plug-pin discolouration around the socket, buzzing, heat in the plate, damaged faceplates, broken switches and intermittent power on one or more outlets. Burning smells or visible scorch marks mean the outlet should be taken out of service immediately and inspected by a licensed electrician. Brown or yellow discolouration around a socket is often a sign of long-term overheating that warrants replacement.
Avoid running multiple high-draw appliances from the same quad outlet bank without a load assessment. Do not plug a power board or double adaptor into a quad to extend it further, as this defeats the planned design and increases overload risk. Keep indoor quads away from moisture unless the model is specifically rated for damp environments, which is rare for quads. A smart power point can help track per-outlet consumption where load awareness is a priority.
Club Clipsal is Australia's largest electrician community offering trade rewards, business support, and exclusive benefits. When you nominate Sparky Direct as your preferred wholesaler, we automatically apply your Clipsal spend points to your Club Clipsal account daily.
Entry-level offering coaching, mentoring, and training discounts
Unlock exclusive industry tools and networking events
Access Toyota fleet offers and business software discounts
Maximum benefits, including VIP experiences and rewards
1. Sign Up: Create your Club Clipsal account at clipsal.com/club-clipsal or via the iCat mobile app
2. Nominate Sparky Direct: Select Sparky Direct from the wholesaler dropdown menu in your profile
3. Add Email: Enter your Sparky Direct account email address in the membership number field
4. Start Earning: Every dollar spent on Clipsal products earns points automatically
Redeem points from the rewards store, including gift cards, tools, and experiences. Access business summits, product training, and industry networking events. Receive early access to new product launches and special promotions. Connect with fellow electricians via the Club Clipsal community app.
Watch Clipsal Iconic 3015-4VW | Quad Power Point 10amp 250v Vivid White 3015/4 VW video
Watch Trader Puma PU4X4AC | Power Point 4 Gang 10A 250V | Double Pole Plus 4 Gang USB Charger Type A & C (3.1A) | White video
Watch NLS 30455 | Quad Power Point 10Amp | Double Pole | Classic Style video
I bought 8 of these for our home and I haven't looked back! These are SO HANDY to have in our school room, with so many computers set up for the children, it allows them to have theirs systems connected, while also having USB lighting and charging stations for their smaller devices, charging headphones & etc! ALSO, these are such a BREEZE to install, it's a small rectangle, single space, our own electrician complemented them! Have a space where you need USB and multiple power points, I would Totally Recommend These!
They look fantastic. I replaced my 2 gang power points (also Clipsal Saturns - which I've installed in another room) for the 4 gang power points in my kitchen as I have more appliances than points. So I have 2 4 gang power points and they look great, match the light fittings and I'm very happy. I now have these throughout my home - all the light fittings and power points, they look stylish and I've had comments on them from several of my friends.
Resident in Bedroom 1 always complaining of lack of plugin points to charge devices . Double GPO not enough!! An additional Power Board was becoming dangerously over Loaded. Purchased a Puma PUBIG4 4 Gang Fixed Power Point, arrived soon, & with spare time took only a few minutes to fit, part of our deal was that future devices are USB charging!!!!
Trusted brands • Expert advice • Fast Australia-wide delivery • Trade pricing
Shop Quad Power Points → Get Expert Advice →
