Martec MLBF12345W | BLADE 1200MM 36W Tricolour LED Surface Mounted Batten Light | White
The Martec BLADE MLBF12345W is a 1200mm surface-mounted LED batten light rated 36W 220–240V, with switchable tricolour temperature (3000K, 4000K, 5000K). The MLBF12345W is rated IP20 for interior use and is suitable for domestic and commercial installation under the Aust/NZ approval SGS-191001-E.
Fluorescent battens have fallen out of favour on job sites and in renovations. Electricians and renovators now specify LED replacements for their energy efficiency, long lifespan, and clean installation. The Martec BLADE MLBF12345W offers a slimline profile at only 30mm depth, making it ideal for retrofit jobs where space is tight. The 3400-lumen output delivers clean white light across three temperature settings, eliminating the need for multiple fittings. Buyers routinely upgrade from older fluorescent or incandescent battens to this model, taking advantage of its direct-mount design (no brackets or tools required) and rear cable channel for fast wiring.
Licensed electricians and builders specify the Martec BLADE MLBF12345W for its slimline 30mm profile and straightforward direct mounting. The rear cable channel and centre terminal block allow termination in minutes on standard wiring runs. The switchable tricolour output means site teams can dial in the right light temperature for the application—3000K for warm residential areas, 4000K for neutral general lighting, 5000K for task-critical zones. The non-dimmable, fixed-output design simplifies stock rotation and minimises returned-goods calls from sites where dimmable fittings are misconfigured.
Features
- Super-slim 30mm profile — only 75mm high and 1200mm long, fitting flush into tight ceiling spaces and replacing standard fluorescent battens without modification.
- Direct mounting, no brackets — mounts straight to the ceiling with supplied screws, eliminating the need for secondary fixings or tools on site.
- Switchable tricolour LED — select 3000K warm, 4000K neutral, or 5000K cool white light at the switch, all from the same fitting.
- 3400 lumens — high-output SMD LED array delivers even light distribution across the 120-degree beam angle for residential and commercial spaces.
- Opal polycarbonate diffuser — diffuses LED output evenly and resists yellowing, maintaining white appearance longer than traditional acrylic.
- Built-in driver, rear cable channel — non-isolated driver is factory-fitted; rear wire entry simplifies termination to a centre terminal block.
- Lightweight aluminium housing — powder-coated extruded body with plastic end caps reduces weight while maintaining rigidity and thermal dissipation.
- IP20 rating, interior only — suitable for dry indoor spaces only; not weatherproof or rated for damp exposed locations, bathrooms, or external walls.
- 30,000-hour lamp life — approximately 27 years of 8-hour daily use before maintenance is likely; SMD LED technology is maintenance-free during this period.
- 2-year manufacturer's warranty — Martec covers defects in materials and workmanship; warranty is void if installed by unlicensed persons.
- Non-dimmable output — fixed brightness at selected colour temperature; not suitable for use with dimmer switches or speed controllers.
- CRI ≥80 — colour rendering index of 80 or higher ensures natural colour appearance in residential and commercial environments.
Where to use
- Kitchens and dining areas — the MLBF12345W is ideal for bench and dining-room lighting where task lighting and even distribution are priorities; select 5000K for precision work or 3000K for ambient warmth.
- Home offices and study spaces — 4000K neutral light supports screen work and reading without causing eye strain; low profile keeps desk areas uncluttered.
- Garage and workshop lighting — high lumens and 5000K colour temperature provide bright task light for precision work; direct mounting on timber or plasterboard requires no additional hardware.
- Laundries and utility rooms — tough aluminium construction resists dust and minor impact; slimline profile fits neatly over benches and service areas.
- Retail and commercial spaces — 3400 lumens and switchable colour temperature make the MLBF12345W suitable for shop display, fitting rooms, and office areas; low profile maintains sight lines.
- Sheds and garden rooms — the MLBF12345W is commonly installed in outbuildings where space is limited and stable, long-life lighting is valued.
- Renovation and new-build specifications — electricians routinely specify the Martec BLADE as a direct replacement for older fluorescent battens; no rewiring needed if existing conduit and switch runs are compatible.
The Martec BLADE MLBF12345W is not rated for external walls, damp exposed locations, or bathrooms. Do not install the MLBF12345W in splash zones, outdoor wet areas, or any application where the fitting may be exposed to moisture or rain. The fitting is interior-only and rated IP20 (dust ingress tolerated, no water resistance).
Verified Sparky Direct customer reviews: Martec BLADE 1200MM 36W Tricolour LED Surface Mounted Batten Light (MLBF12345W)
"Great light, low profile easy to mount and terminate. The switchable colour works well." — Craig
"These are an absolute bargain and have clean white light on the 5000k setting." — Adrian
"Great product that really lights our back patio area." — Roy
