Skip to main content
$75 Prezzee Back on Clipsal Orders $750+ | FREE Standard Delivery on Clipsal Orders Over $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our PSA LIFESAVER LIF5800ACF | 240v Flush Smoke Alarm with 10 Year Lithium Battery (non-replaceable) video.

        PSA | 240V Photoelectric Smoke Alarm | 10-Year Lithium Battery Flush Mount

        The PSA Lifesaver LIF5800ACF is a 240V mains-powered photoelectric smoke alarm with a sealed 10-year non-removable lithium battery backup, designed for early detection of smouldering fires in residential homes. Its low-profile flush mount design installs into a standard 90mm ceiling cut-out, offering a discreet finish similar to a downlight. The LIF5800ACF can be interconnected with up to 24 compatible PSA Lifesaver alarms, including smoke, heat, and carbon monoxide units, to deliver whole-home protection.

        Homeowners and renovators value the LIF5800ACF for its sealed battery design that eliminates the annual maintenance cycle of traditional 9V-backed smoke alarms. The photoelectric sensor is particularly effective in kitchens and dining areas where cooking steam and fumes can trigger false alarms on ionisation units. Licensed electricians favour the LIF5800ACF because the flush mount sits flush with modern ceilings, leaving no visible wiring or corner fittings, and because the interconnect capability simplifies whole-home specification on new builds and renovations. The alarm is ActivFire approved and compliant with AS 3786:2014.

        Electricians and builders use the LIF5800ACF as a quick-install complement on renovation and new-build quotes. The Test and Hush button allows on-site verification without silencing the entire network. Interconnecting up to 24 units on one circuit supports multi-level homes and open-plan designs. Queensland building code compliance is straightforward since the LIF5800ACF meets the mandatory photoelectric requirement for bedrooms and hallways. Quick-connect 4-pin wiring reduces installation time compared to traditional screw terminals, and the sealed 10-year battery eliminates service call-backs from dead 9V batteries.

        Features

        • 240V mains powered — continuous operation on hardwired AC supply with consistent performance regardless of battery condition.
        • 10-year sealed battery backup — non-removable lithium battery maintains operation during mains power outages without annual replacement or maintenance.
        • Photoelectric sensor — detects smouldering fires and visible smoke particles with reduced false alarms compared to ionisation technology.
        • Flush mount design — installs into a standard 90mm ceiling cut-out for a low-profile, modern appearance matching downlight positioning.
        • 85dB alarm sound at 3 metres — loud three-beep pattern with flashing red LED provides clear audible and visual alarm indication.
        • Interconnectable to 24 units — link compatible PSA Lifesaver smoke, heat, and CO alarms to create whole-home fire detection coverage.
        • Test and Hush function — single button allows electricians to verify alarm operation on-site and silences nuisance alarms without isolating the circuit.
        • Dual LED indicators — green LED shows AC power status; red LED flashes to indicate alarm condition and battery low status.
        • Alarm memory — records the last alarm event for diagnostics and system verification after testing or false-alarm events.
        • Dual insect screens — inner and outer mesh barriers reduce dust and insect entry into the photoelectric chamber, minimising false alarms.
        • AS 3786:2014 compliant — Australian smoke alarm standard certified, ActivFire approved, and RCM marked for domestic and commercial use.
        • Operating temperature 0°C to 40°C — suitable for most Australian residential interiors; not rated for external mounting or temperature-controlled archives below freezing.

        Where to use

        • Bedroom ceilings — Queensland legislation requires photoelectric smoke alarms in all bedrooms; the LIF5800ACF flush design meets code and suits low-profile modern ceilings.
        • Kitchen and dining areas — photoelectric sensing reduces nuisance alarms from cooking steam and fumes, unlike ionisation units.
        • New builds and renovation work — the LIF5800ACF is a standard-spec choice for architects and builders designing homes requiring interconnected photoelectric coverage.
        • Lounge and family rooms — open-plan spaces benefit from whole-home interconnection, linking multiple ceilings without running extra cable.
        • Hallways and transition areas — interconnected hallway alarms provide early warning on multi-storey homes where fires can spread between levels.
        • Rental and holiday properties — sealed battery eliminates tenant-related maintenance and warranty disputes over annual 9V battery replacement.
        • Multi-level residential properties — up to 24 unit interconnection allows full coverage across three or four-storey family homes or townhouses.

        The LIF5800ACF is not rated for external walls, damp exposed locations, or outdoor mounting. Operating temperature range is 0°C to 40°C — do not install in uninsulated roof voids, unheated sheds, or freezers. Licensed electrician installation is mandatory — Sparky Direct does not supply installation support, and warranty is void if the LIF5800ACF is installed by unlicensed persons. Do not paint, insulate, or obstruct the alarm with ceiling roses, cornices, or acoustic panelling.

        Verified Sparky Direct customer reviews: PSA LIF5800ACF Photoelectric Flush Smoke Alarm (SKU: LIF5800ACF)

        "great smoke detectors with 10-year batteries" ~ Wally

        (LIF5800ACF)

        It uses a photoelectric sensor, which is effective at detecting smouldering fires and helps reduce nuisance alarms.

        It is 240V mains powered and includes a sealed 10-year lithium battery backup for continued operation during power outages.

        The flush mount design allows the alarm to install into a standard 90mm ceiling cut-out, giving a low-profile finish similar to a downlight.

        Yes. It can be interconnected with up to 24 compatible PSA Lifesaver smoke, heat, or carbon monoxide alarms.

        Yes. It includes Test & Hush functionality, allowing routine testing and temporary silencing during non-emergency situations.

        Yes. Sparky Direct stocks the PSA Lifesaver LIF5800ACF with fast dispatch and fast Australia-wide delivery.

        Photoelectric sensing technology detects visible smoke particles associated with smouldering fires. This method is more responsive to slow-burning fires than ionisation alarms and generates fewer nuisance alarms in kitchens and dining areas.

        No. The LIF5800ACF includes a sealed 10-year non-removable lithium battery. The battery is integrated into the alarm and cannot be replaced during its service life. After 10 years, the entire unit is replaced.

        Yes. The LIF5800ACF can be wired to interconnect with up to 24 compatible PSA Lifesaver smoke, heat, and carbon monoxide alarms. When one alarm triggers, all connected units sound.

        The LIF5800ACF is primarily powered by 240V AC mains supply. During mains power outages, the sealed 10-year lithium battery provides backup power to maintain operation and alarm capability.

        The LIF5800ACF is designed for a standard 90mm diameter flush-mount ceiling cut-out. This matches downlight positioning and installs into Australian standard plasterboard ceilings without requiring special mounting hardware.

        PSA Products provides a 10-year manufacturer's warranty from the invoice date, covering manufacturing defects. The warranty is void if the alarm is installed by unlicensed personnel or if the sealed battery has been tampered with.

        The LIF5800ACF produces an 85dB alarm sound at 3 metres, equivalent to a loud alarm clock or doorbell. The audible pattern is three long beeps repeating, accompanied by a flashing red LED every 0.5 seconds.

        Installation must be performed by a licensed electrician in accordance with AS 3786:2014 and the LIF5800ACF User Manual. Sparky Direct does not provide installation guidance, and warranty claims are void if the alarm is installed by unlicensed persons or in non-compliant configurations.

        The PSA LIF5800ACF is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 10 Year
        Commercial Use: 10 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand PSA Products
        SKU LIF5800ACF
        Model # LIF5800ACF
        Barcode # 9318475001592
        Package Weight 0.344kg
        TYPE VALUE
        Type Smoke Alarm
        Brand PSA
        Range Lifesaver
        Colour White
        Mounting Surface Mount
        Mounting Flush Mount
        Installation Area Indoor
        Wiring Quick connect 4 pin plug
        Sensor type Photoelectric
        Interconnecting Interconnectable up to 24 units
        Temperature Range 0°C to 40°C
        Humidity Range Up to 93% RH
        Compliance AS3786:2014, Activfire Approved, RCM Marked
        Power Requirement 240V AC 50Hz
        Alarm Sound Output 85dB at 3 metres

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products