Skip to main content
$75 Prezzee Back on Clipsal Orders $750+ | FREE Standard Delivery on Clipsal Orders Over $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Clipsal AIRFLOW | 3-in-1 Bathroom Heater Lamp Light & Exhaust Fan | 2x275W Heat, White

        The Clipsal AIRFLOW 6600ADS-WE is a ceiling-mounted 3-in-1 bathroom unit combining 550W radiant heat (2x275W lamps), 8W LED centre light, and an exhaust fan in a single grille. Rated for 240V mains power, the 6600ADS-WE features a backdraught shutter to block unwanted air movement and is double insulated, BCA compliant, and designed for small bathrooms, toilets, ensuites, kitchens, and laundries. The unit mounts flush to the ceiling with spring-loaded clamps and requires a 380 x 230 mm oblong hole.

        Replacing an aging bathroom fan often reveals cramped ceiling cavities and the frustration of rewiring separate controls for heat, light, and ventilation. The 6600ADS-WE consolidates all three functions into one compact unit, cutting installation time and reducing the number of circuit connections on the board. Many tradies specify this model when upgrading rental properties or renovation work where space and simplicity matter; the low-profile grille fits standard cavity depths without the usual depth clearance headaches that plague multi-function units.

        Licensed electricians value the 6600ADS-WE for its plug-and-play design and straightforward wiring. The spring-loaded clamps hold the unit square, the ceramic lamp holders and LED are pre-fitted, and there is no tweaking or alignment needed on the jobsite. The powerful 338 m³/hr airflow clears moisture fast, and the backdraught shutter prevents winter cold creeping back between uses. Repeat orders are common; the 6600ADS-WE is a proven repeat-order unit that sparkies specify when upgrading from older Mistral or Clipsal single-function units.

        Features

        • Backdraught shutter — prevents unwanted air draughts and cold air backflow during winter, maintaining temperature control inside the bathroom.
        • Dual 275W radiant heat lamps — 550W total output with ceramic lamp holders rated for high-temperature operation and long lamp life.
        • 8W LED centre light — bright white light with energy efficiency and instant-on operation, no warm-up time.
        • High-airflow exhaust fan — 338 m³/hr rated motor with ball-bearing construction for quiet operation and rapid moisture removal.
        • Spring-loaded clamps — quick installation into standard ceiling cavities with no additional brackets or fasteners needed.
        • Ceiling cavity mount — fits 380 x 230 mm oblong hole; minimum 500mm cavity depth required; no external trim ring.
        • BCA compliant — complies with Building Code of Australia and meets all domestic and commercial electrical standards without restriction.
        • Double insulated — safety-rated insulation throughout means no earth conductor required in the fixed wiring.
        • Easy maintenance — grille and light cover unscrew for cleaning; ceramic lamp holders are user-accessible.
        • Compact single-unit design — replaces three separate fixtures (heater, light, fan), reducing wiring complexity and ceiling clutter.

        Where to use

        • Small bathrooms and ensuites — the 3-in-1 format is ideal for compact bathrooms where space is tight and separate heating, lighting, and ventilation fixtures would crowd the ceiling.
        • Rental property upgrades — code-compliant, low-maintenance unit for end-of-lease bathroom refits; straightforward to install and hard to break.
        • Renovation and new-build specs — the 6600ADS-WE is a fast installation choice for renovations where the builder wants one fixture instead of three separate runs.
        • Kitchens and laundries — wherever moisture control and warmth are needed in a single compact footprint.
        • Retrofit replacements — the 6600ADS-WE fits the same ceiling hole and cavity depth as earlier Clipsal and Mistral 3-in-1 units, making it a direct swap.
        • Winter comfort applications — the dual heaters and backdraught shutter make this unit particularly effective in climate zones where heating and draft prevention are priorities.

        The Clipsal AIRFLOW 6600ADS-WE is not suitable for external walls, damp exposed locations, or outdoor installation. Do not install in bathrooms above ground floor or in areas subject to rain exposure or splash zones; the unit is rated for internal ceiling cavity mounting only.

        Verified Sparky Direct customer reviews: Clipsal AIRFLOW 6600ADS-WE (6600ADS-WE)

        "Ordered Sunday delivered Tuesday. Five Stars!" — Tony S

        "Exhaust is powerful, but quiet, light is well bright." — MargH

        "Easy to install, works really well." — Steve

        (6600ADS-WE)

        Installation of the 6600ADS-WE must be done by a licensed electrician. The unit requires mains 240V wiring and must be correctly earthed or insulated per AS/NZS 3000. The ceiling hole (380 x 230 mm oblong) must be cut accurately, and the unit secured with its spring-loaded clamps.

        The 6600ADS-WE features a more powerful 338 m³/hr exhaust motor compared to earlier models, a brighter 8W LED light instead of incandescent, and an improved backdraught shutter design. The unit retains the same ceiling hole dimensions, so it is a direct replacement for older Mistral 6600A units.

        Yes, the 6600ADS-WE is designed for bathrooms, kitchens, and laundries. The 338 m³/hr airflow handles moisture-heavy environments, and the backdraught shutter prevents humid air from creeping back in. However, the unit is not weatherproof and must be mounted inside a ceiling cavity, not in external walls.

        Minimum ceiling cavity depth is 500 mm. The spring-loaded clamp system holds the unit secure in standard cavity depths; no additional drop-down or extension brackets are required on most installations.

        The ceramic lamp holders are rated for long life under continuous use. Replacement lamps can be sourced from electrical suppliers; the 6600ADS-WE accepts standard 275W radiant heater lamps. Simply unscrew the grille to access the lamps — no special tools needed.

        The 6600ADS-WE comes with a 5-year warranty covering both domestic and commercial use. Warranty covers manufacturing defects and component failure; it does not cover damage from incorrect installation, electrical overload, or environmental damage. Contact Sparky Direct or the manufacturer for warranty claim support.

        The 6600ADS-WE (550W heater plus light and fan) should be connected to its own dedicated 10A or 15A circuit with appropriate RCD protection. The total load depends on how the controls are wired (simultaneous or staged operation). Your licensed electrician will confirm the correct circuit configuration per AS/NZS 3000.

        The Clipsal 6600ADS-WE is available online from Sparky Direct with Australia-wide delivery to all states and territories, including regional areas.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 5 Year
        Commercial Use: 5 Year
        Warranty Method: Clipsal in-home warranty

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Clipsal by Schneider Electric
        SKU 6600ADS-WE
        Model # 6600ADS-WE
        Barcode # 9311554779719
        Package Weight 3.550kg
        TYPE VALUE
        Type Heat Fan Light
        Brand Clipsal by Schneider Electric
        Colour White
        Power Source 240V Mains
        Mounting Ceiling cavity
        Voltage (V) 240
        Wattage (W) 550
        Warranty 5 Year
        Light Output (W) 8
        Airflow (m³/hr) 338
        Hole Cut Out (mm) 380 x 230

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products