Skip to main content
$75 Prezzee Back on Clipsal Orders $750+ | FREE Standard Delivery on Clipsal Orders Over $330 More

Flat Rate Standard Shipping Only $15.95

100 Day Money Back Guarantee

Australian Customer Service

About Us

07 5428 3044
Australia's #1 Online Electrical Wholesaler | 400,000+ happy customers
Google Reviews
4.9 6,905+ reviews

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Ultimate Efficiency and Professional Finish

        • MAX9 takes the definition of a busbar to next level with MAXBAR. MAXBAR helps to improve installation speed by up to 15 times when compared to using cables for feeding RCBOs
        • With MAXBAR, no cable connections are needed to feed final sub-circuits protected by an RCBO or AFDD - it picks up the active feed from the main switch and distributes both active & neutral across all types of Clipsal  RCBOs and AFDDs

        Clipsal by Schneider Electric | 10A MAX9 RCBO 1PN C 30mA Type A | SLIM DIN Rail

        The Clipsal MX9R3110 is a residual current breaker with overcurrent protection (RCBO), rated 10A 240V 30mA Type A C-curve for single-pole plus neutral circuit protection. Combining RCD and MCB functions in a single module, the MX9R3110 delivers both electrical-shock protection and circuit overcurrent protection on one DIN rail device, eliminating the need for separate RCD and MCB installations. It complies with AS/NZS 61009.1 and is certified to IEC 61009-2-2, making it approved for domestic and commercial installations across Australia. The MX9R3110 is a 1P+N breaker with 6kA breaking capacity and instantaneous earth-leakage protection at 30mA.

        RCBOs have become the standard choice for retrofit work in Australia, particularly where switchboard space is limited. Unlike older MCB-plus-RCD combinations that occupy two module positions, the Clipsal SLIM RCBO occupies just one module width, freeing up valuable DIN rail space for additional circuits or future expansion. Licensed electricians value RCBOs for rapid installation on final sub-circuits, fast wired-up retrofits, and reduced component count on the switchboard. The MX9R3110 is the most commonly specified 10A RCBO in domestic installations and pairs efficiently with the Clipsal MAX9 busbar system for circuit feed distribution.

        Installation trades prefer the MX9R3110 for cost-effective circuit protection upgrades. The device fits flush on standard DIN rails, carries full manufacturer warranty, and is compatible with all Clipsal MAX9 switchboard enclosures and busbar accessories. With a compact 18mm module width, electricians can often retrofit additional RCBOs into existing boards without replacing the enclosure. Fast dispatch and established stock mean the MX9R3110 minimises job delays when replacing failed RCBOs or upgrading circuits during renovation work.

        Features

        • 1P+N configuration with 10A rating — the MX9R3110 protects single-pole active conductor plus neutral on a 10 ampere rated circuit, suitable for general-purpose power and lighting sub-circuits in domestic premises.
        • Type A 30mA earth-leakage protection — detects AC and pulsating DC leakage currents down to 30mA and trips instantaneously without time delay, meeting all Australian domestic protection requirements.
        • C-curve trip characteristic — combines magnetic and thermal elements to tolerate inrush current on circuits with motors or transformers, tripping only on genuine short circuits or sustained overload.
        • 6kA short-circuit breaking capacity — the MX9R3110 safely interrupts fault currents up to 6000A at 240V AC without damage, suitable for all residential and most commercial sub-circuit applications.
        • SLIM one-module width design — occupies only 18mm on a standard DIN rail, enabling retrofit installations in space-constrained switchboards where full enclosure replacement would be costly.
        • Top and bottom line/load terminals — standard tunnel-type terminals accept 1–16mm² rigid conductor or 1–10mm² flexible cable from either entry point, simplifying wiring topology on crowded boards.
        • Trip-free locking mechanism — manual handle locks in ON or OFF position and cannot be held closed during a genuine fault, ensuring the circuit cannot remain energised beyond trip threshold.
        • Compatible with Clipsal MAX9 busbar system — the MX9R3110 plugs directly onto MAXBAR distribution blocks, eliminating individual cable feeds for each circuit and reducing installation time by up to 15 times.
        • Compatible with Clipsal 4LD Lock Dog — optional mechanical lock accessory prevents unauthorised manual operation, used in shared electrical spaces or when circuit isolation must be guaranteed.
        • 10,000 electrical cycles rated — proven endurance rating confirms reliability for frequent switch operations on test circuits or maintenance-heavy installations over the device lifetime.
        • AS/NZS 61009.1 and IEC 61009-2-2 certified — independently tested to Australian and international safety standards for earth-leakage detection and overcurrent protection, with RCM quality mark.
        • Not suitable for circuits with DC leakage only — Type A protection detects AC and pulsating DC but will not trip on pure DC faults; circuits supplying HVDC equipment require different protection strategies.

        Where to use

        • Domestic kitchen and laundry circuits — final sub-circuits feeding power points, cooking appliances and laundry loads where the 10A rating handles combined demand and the MX9R3110 provides dual RCD+MCB protection on a single device.
        • Bathroom and wet-area power points — earth-leakage protection at 30mA is mandatory in wet locations under AS/NZS 3000, and the one-module footprint saves space when retrofitting older switchboards.
        • Lighting circuits in domestic renovations — general-purpose 10A lighting sub-circuits benefit from integrated RCD protection, and the compact module width allows more circuits per enclosure on renovation jobs.
        • Garage and workshop circuits — tool circuits and auxiliary lighting are protected against both overload and electrical shock, with C-curve tolerance for motor inrush on power tools.
        • Retrofit and renovation work — space-constrained switchboards in older homes often cannot accommodate separate MCB and RCD stacks; the SLIM RCBO eliminates that constraint and speeds installation.
        • Three-phase domestic sub-board upgrades — where a single 10A single-phase circuit is being added to an existing installation, the MX9R3110 is faster to install than running a new MCB and RCD.
        • Temporary site installations and portable switchboards — compact DIN-rail format suits temporary electrical distribution for site offices or mobile workspaces where switchboard footprint is at a premium.

        The Clipsal MX9R3110 is rated for indoor switchboard mounting in environments between -25°C and +70°C. It is not suitable for outdoor or weatherproof enclosures, wet-panel installations, or direct exposure to rain or moisture. Do not install the MX9R3110 in damp external locations or areas subject to salt spray, corrosion, or temperature extremes beyond the rated operating range. This device is designed for DIN-rail mounting inside enclosed switchboards only.

        Verified Sparky Direct customer reviews: Clipsal MX9R3110 10A MAX9 RCBO 1PN C 30mA Type A SLIM (MX9R3110)

        "Well done. Will buy again!" — Simon

        "Awesome Product" — Eddy

        "Well priced and easy to install." — Michael

        (MX9R3110)

        Yes. The Clipsal MX9R3110 is a residual current breaker with overcurrent protection (RCBO), combining both RCD (30mA Type A earth-leakage) and MCB (10A circuit overcurrent) protection in a single one-module device. You do not need separate RCD and MCB devices for the protected circuit.

        It eliminates two separate modules and replaces them with one SLIM module that occupies 18mm of DIN rail width. This saves space in the switchboard, reduces wiring complexity, and speeds up installation. Both provide the same level of protection, but the RCBO takes half the module positions.

        Yes. The MX9R3110 is rated IP20 and can be mounted inside an enclosed switchboard serving a wet area bathroom. However, the switchboard enclosure itself must be installed in a suitable dry location, not directly in the bathroom. It provides the required 30mA Type A earth-leakage protection for circuits feeding wet-area power points.

        Yes. The Clipsal MX9R3110 plugs directly onto Clipsal MAXBAR distribution blocks. Using the MAX9 busbar eliminates individual cable feeds to each RCBO, reducing installation time significantly compared to wiring RCBOs individually. The MX9R3110 is fully compatible with all MAX9 busbar and accessory options.

        The Clipsal MX9R3110 carries a 7-year manufacturer warranty for both domestic and commercial installations, covering manufacturing defects. Warranty is void if the device has been installed by anyone other than a licensed electrician, or if it has been physically damaged, modified, or subjected to conditions outside the rated operating range.

        The MX9R3110 has a trip-free locking handle that locks in either the ON or OFF position. For additional security, the optional Clipsal 4LD Lock Dog accessory can be fitted to the handle, preventing unauthorised operation on circuits where isolation must be guaranteed during maintenance or test work.

        The Clipsal MX9R3110 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.

        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.

        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 7 Year
        Commercial Use: 7 Year
        Warranty Method: Clipsal in home warranty

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Clipsal by Schneider Electric
        SKU MX9R3110
        Model # MX9R3110
        Barcode # 9311554812676
        Package Weight 0.135kg
        View Datasheet
        View Brochure
        View Manual
        TYPE VALUE
        Type Circuit Protection
        Brand Clipsal by Schneider Electric
        Range Clipsal - Max9
        Rated Current (A) 10A
        Height (mm) 93
        Width (mm) 18
        Depth (mm) 73
        Equivalent Hager Reference ADC910T
        Voltage (V) 240Vac
        Equivalent Max 4 Reference 4RCBE210/30S
        Tripping Standard
        Poles 1P+N
        Curve C-curve
        Earth Leakage Protection Class A-type
        Earth Leakage Sensitivity 30mA
        Breaking Capacity 6kA
        IP Rating IP20

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products
        Clipsal MX9C112511 | MAX9 Contactor 25A 240V AC 1NO 1NC
        Clipsal MX9C112511 | MAX9 Contactor 25A 240V AC 1NO 1NC

        $110.30 $100.27 ex. GST

        Clipsal MX9E3318S | MAX9 Enclosure, 3 row 18 Mod Surface
        Clipsal MX9E3318S | MAX9 Enclosure, 3 row 18 Mod Surface

        $284.35 $258.50 ex. GST

        See Alternative
        Clipsal MX9A3206 | 6A MAX9 AFDD all-in-one 1PN C | 30mA Type A
        Clipsal MX9A3206 | 6A MAX9 AFDD all-in-one 1PN C | 30mA Type A

        $226.27 $205.70 ex. GST

        Clipsal MX9C112510 | MAX9 Contactor 25A 240V AC 1NO
        Clipsal MX9C112510 | MAX9 Contactor 25A 240V AC 1NO

        $86.88 $78.98 ex. GST

        Clipsal MX9R1106 | 6A MAX9 RCBO 1PN C | 10mA Type A SLIM
        Clipsal MX9R1106 | 6A MAX9 RCBO 1PN C | 10mA Type A SLIM

        $81.41 $74.01 ex. GST

        Notify Me
        Clipsal MX9SB218S | MAX9 36 Pole Surface Mount Enclosure | 2 Rows
        Clipsal MX9SB218S | MAX9 36 Pole Surface Mount Enclosure | 2 Rows

        $78.05 $70.95 ex. GST

        Notify Me
        Clipsal MX9E2315F | MAX9 Enclosure 3 row 15 Mod Flush
        Clipsal MX9E2315F | MAX9 Enclosure 3 row 15 Mod Flush

        $299.48 $272.25 ex. GST

        See Alternative
        Clipsal MX9B112N | MAX9 Busbar 1PN w N Block Acc 12 modules
        Clipsal MX9B112N | MAX9 Busbar 1PN w N Block Acc 12 modules

        $43.26 $39.33 ex. GST

        Notify Me