Skip to main content
$75 Prezzee Back on Clipsal Orders $750+ | FREE Standard Delivery on Clipsal Orders Over $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Clipsal TPDL1C3 | 7W Tri-Colour Dimmable LED Down light Kit | 90mm Hole video.

        Additional related video.

        Additional related video.

        Clipsal TPDL1C3 | 7W Tri-Colour Dimmable LED Downlight | 90mm Hole

        The Clipsal TPDL1C3 is a 7W tri-colour dimmable LED downlight kit rated 240V, delivering 700–750 lumens depending on the selected colour temperature. The TPDL1C3 is designed for residential and commercial ceiling installations where a recessed, low-glare light output is required. A tri-colour temperature selector switch allows the installer to choose between 3000K (warm), 4000K (neutral), or 6000K (daylight) at installation time. The TPDL1C3 complies with AS/NZS 60598.2.2 and AS/NZS 61347 standards.

        Retrofit and renovation work often requires downlight replacements in tight ceiling cavities. The TPDL1C3 fits standard cavity depths at just 58 mm and allows the installer to choose colour temperature on installation, removing guesswork. Electricians value the IC-4 safety rating: the fitting can sit abutted to building materials and covered by insulation without risk of overheating. The IP44 front rating also supports sheltered outdoor use (patios, eaves), broadening where the TPDL1C3 can be specified on a single job.

        The dimmable design works with Clipsal LED dimmer products, allowing brightness control where needed. Professional installers appreciate the straightforward compatibility and plug-and-flex connection (included in the kit), which reduces on-site wiring time. The 50,000-hour lifespan (at L70) and 3-year manufacturer warranty (in-home service) deliver long-term durability for residential and light commercial use.

        Features

        • 7W LED power — delivers 700–750 lumens equivalent to earlier 20–25W halogen downlights, reducing energy consumption and heat output on the job.
        • Tri-colour temperature switch — allows installer-selected output of 3000K, 4000K, or 6000K without stock keeping of multiple units.
        • IC-4 rated — safely abutts and covers with insulation or building materials, eliminating thermal isolation requirements on tight ceiling cavities.
        • Frosted diffuser — produces soft, diffused illumination with reduced glare, improving visual comfort in living areas and workspaces.
        • Dimmable with Clipsal LED dimmer technology — smooth brightness control compatible with Clipsal 30/40/60 mechanism dimmers and Wiser smart home systems.
        • IP44 rated front — suitable for indoor applications and sheltered outdoor eaves where splash protection is needed.
        • Complete plug-and-flex kit — includes LED fitting, 10A flex lead, and connection plug; ready to install into standard ceiling downlight holes.
        • Optional metal trim covers — brushed chrome or black clip-on trims available (sold separately) to tailor finish appearance.
        • 50,000-hour lifespan — L70 rating ensures consistent light output over extended operational life in residential and commercial settings.
        • 3-year warranty — Clipsal in-home service warranty covers manufacturing defects without requiring customer uninstallation.

        Where to use

        • Kitchen ceilings — the TPDL1C3 delivers strong illumination (700–750 lm) for task lighting and general food preparation areas without excessive heat.
        • Living and dining areas — tri-colour temperature selection allows warm (3000K) tones for relaxation or cool (6000K) for task-focused spaces.
        • Bedroom retrofit lighting — low glare and dimmable dimming support comfortable, adjustable lighting for sleeping and dressing areas.
        • Bathroom and ensuite downlights — IP44 rating and moisture-resistant design suit damp zones where standard downlights are restricted.
        • Sheltered outdoor eaves — IP44 front protection enables use in covered outdoor areas (verandas, patios) where splash zones exist.
        • Commercial office and retail ceilings — dimmable operation and daylight temperature option support task lighting and display applications.
        • Rental property upgrades — energy-efficient replacement of older halogen or incandescent downlights reduces tenant-facing energy bills and improves safety.

        The Clipsal TPDL1C3 is not suitable for fully weatherproof or submerged outdoor installations. It is not rated for exterior walls exposed to rain or direct weather, or for installations where water ingress is a risk. Do not use the TPDL1C3 in sauna, steam room, or high-humidity environments exceeding 95% relative humidity without additional protective housing.

        Verified Sparky Direct customer reviews: Clipsal TPDL1C3 | 7W Tri-Colour Dimmable LED Down light Kit | 90mm Hole (TPDL1C3)

        "Easy to install" — Mr

        "Great product. Easy DIY replacement for older down lights with improved efficiency." — Brendon

        "I like these Clipsal lights, they run cool and are bright" — Peter

        (TPDL1C3)

        How Many Downlights per Room Calculator

        Estimated Number of Downlights

        0

        Calculation Details

        Total Lumens Required: 0 lm
        Recommended Spacing: 0 m
        Lights Along Length: 0
        Lights Along Width: 0
        Note: The higher number of downlights is recommended to achieve uniform illumination throughout the entire space. The results provided are suggestions only and should be used as a guideline.

        Yes, at Sparky Direct, we sell Clipsal TPDL1C3 LED Downlights at bulk special prices. 

        The Clipsal TPDL1C3 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        Yes, optional metal trim covers in brushed chrome (TPDL1T3BC) and black (TPDL1T3BK) are available and sold separately. These clips over the standard white trim to customise the finish. Installation is quick and requires no rewiring. Clips are not included with the standard kit.

        The TPDL1C3 is designed for Clipsal LED dimmers and Clipsal Wiser. Use with non-Clipsal LED dimmers or generic dimmer switches may cause flicker, reduced brightness range, or premature failure. If you already have a non-Clipsal dimmer installed, consult your electrician before ordering; a Clipsal-compatible dimmer may be required for optimal performance.

        The TPDL1C3 comes with a 3-year manufacturer warranty (in-home service) from the date of installation. Clipsal's warranty agents handle claims directly, so you don't need to uninstall or return the unit. Warranty covers manufacturing defects only and is void if the fitting is installed by an unqualified person or used outside specified operating conditions.

        The TPDL1C3 is a modern LED design using just 7W compared to 20–25W halogen equivalents, saving energy and reducing heat output. LEDs also deliver a 50,000-hour lifespan (versus 2,000 hours for halogen), so fewer replacements are needed over time. The tri-colour temperature feature (3000K, 4000K, 6000K) also gives flexibility that single-colour halogen fittings do not offer.

        Yes, the TPDL1C3 is fully dimmable and compatible with Clipsal LED dimmer technology, including the Clipsal Iconic 42ELEDM mechanism dimmers (30W, 40W, 60W versions). Use only LED-compatible dimmers to avoid flicker or damage. The TPDL1C3 also integrates with the Clipsal Wiser smart home system for dimming control via mobile app or voice command.

        The TPDL1C3 has an integrated tri-colour selector switch inside the fitting. Before installation, set the switch to 3000K (warm white), 4000K (neutral), or 6000K (daylight). The switch is preset to 3000K by default. Once the colour temperature is selected and the fitting is installed, the output colour is fixed. You cannot change it in use without removing and re-opening the fitting.

        Installation of the TPDL1C3 must be carried out by a licensed electrician. Electrical work is controlled under the Electrical Safety Act (Queensland) and equivalent state legislation. The TPDL1C3 connects to the mains switchboard circuit, which is a restricted work class. Your electrician will confirm correct RCD protection, correct circuit rating, and compliance with AS/NZS 3000 before commissioning.

        IC-4 rating means the downlight is designed to be abutted (placed directly against) building materials such as timber, plasterboard, or insulation without risk of overheating. In tight ceiling cavities where thermal clearance is limited, the TPDL1C3 can sit flush against the cavity material. This is not permitted with older halogen or non-IC-rated fittings, which require airspace around the housing.

        This LED Downlight Kit is designed for general illumination in residential and commercial buildings. They are a reliable and cost-efficient downlight.

        Great choice! Clipsal LED downlights are a reliable option, The TPDL1C3 offers energy efficiency, long life, and high-quality light output. It comes with features, including dimmable and tri-colour options, so you can find the perfect fit for any room in your home or business.
        With Clipsal’s trusted reputation and solid warranties, you can buy with confidence knowing you’re getting safe and dependable lighting.
        Buy the Clipsal LED Downlight at Sparky Direct for the best price and fastest shipping Australia-wide.

        You can use the TPDL1C3 7W Tri-Colour Dimmable LED Downlight Kit in many different spaces.
        It’s great for living rooms, bedrooms, kitchens, and offices, as well as retail stores and other areas that need reliable general lighting.
        Its dimmable feature also lets you adjust the brightness, making it versatile for both everyday tasks and creating a relaxed atmosphere.
        This flexibility makes it a practical choice for a wide range of applications.

        Yes, the TPDL1C3 7W Tri-Colour Dimmable LED Downlight Kit is a reliable product. It’s made by Clipsal, a well-known brand with a strong reputation for quality and expertise in lighting. You can count on it to deliver dependable performance, and it also comes with a 3-year warranty for extra peace of mind. This means you’re covered if anything goes wrong, giving you confidence in your purchase.

        Yes, the TPDL1C3 downlight can be installed both indoors and outdoors.
        Its plastic IP44-rated front protects it against dust and splashes of water, making it durable and safe in many different environments. This means you can confidently use it in living areas, bathrooms, or even sheltered outdoor spaces. It’s built to handle everyday conditions, giving you reliable performance wherever you choose to install it.

        Yes, you can.
        This downlight is IC-4 rated, which means it’s designed to sit safely against walls, timber, or other building materials.
        You can also cover it with insulation without any risk of overheating or damage.
        It’s built to handle these conditions, so you can install with confidence.

        Yes, the updated 7W design of this downlight produces the same level of brightness while using 22% less power, making it more energy-efficient.

        Yes, the integrated colour temperature selector switch lets you easily choose your preferred colour temperature during installation.
        You can select between 3000K, 4000K, or 6000K with just a flick of a switch.

        Yes, the downlight has a frosted diffuser that provides a soft diffused output and reduces glare.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 3 Year
        Commercial Use: 3 Year
        Warranty Method: Clipsal Warranty Agents - In Home service.

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Clipsal by Schneider Electric
        SKU TPDL1C3
        Model # CLITPDL1C3
        Barcode # 3606486373781
        Package Weight 0.260kg
        TYPE VALUE
        Type Lighting
        Brand Clipsal by Schneider Electric
        Height (mm) 65
        Protection IP44
        Lumens (lm) 700-750
        Lighting Technology LED
        Light Colour (K) 3000 4000 6000
        Dimmable Yes
        Cover Diameter 110
        Cut out Diameter 90mm
        Wattage (W) 7
        Voltage (V) 240V
        Voltage (V) 240
        Installation Area Indoor & Outdoor Protected
        Life time 50,000Hrs
        Beam Angle 90 Degrees
        IP Rating IP44
        Weight (kg) .190
        Cut-Out (mm) 90
        Mounting Depth (mm) 58
        Trim Width (mm) 110
        Beam Angle (Degree) 100

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products