Skip to main content
NO PICK-UPS OR DISPATCH MONDAY 10/08/2026 | KINGS BIRTHDAY PUBLIC HOLIDAY

Flat Rate Standard Shipping Only $15.95

100 Day Money Back Guarantee

Australian Customer Service

About Us
07 5428 3044

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Fireball FB2-TSIOG-500 | Tyre SiO2 Gloss | 500ml video.

        Fireball | Tyre SiO2 Gloss Coating 500ml | 70-90 Percent SiO2 Wet-Look Finish

        The Fireball FB2-TSIOG-500 is a silica-based SiO2 tyre coating supplied in a 500ml bottle, formulated to leave a high-gloss, wet-look finish on tyre sidewalls. The coating carries 70 to 90 percent SiO2 and bonds into the rubber as it self-levels, holding for two to four months per application. The FB2-TSIOG-500 also coats unpainted plastics and exterior rubber trims.

        Water-based tyre dressings rinse away after a couple of washes, and the sidewall returns to a chalky, browned appearance within weeks. The FB2-TSIOG-500 carries a 70 to 90 percent SiO2 concentration. The silica bonds into the rubber rather than sitting on it as a surface film, so the finish survives repeated washing. Its hydrophobic properties shed water, road spray and dirt, keeping the sidewall presentable between details. The formulation does not brown over time, so the rubber retains its colour instead of fading under ultraviolet exposure.

        A work ute parked in a customer's driveway is part of the presentation, and tyres are the first component that dates an otherwise clean vehicle. A single 500ml bottle delivers a two to four month application cycle, so the tyres are recoated quarterly rather than redressed after every wash. The coating layers once fully cured, building additional depth on show vehicles without stripping the previous application. Application runs off the supplied tyre pad in minutes per corner, followed by a 30 to 60 minute set time before the vehicle is driven.

        Features

        • SiO2 polymer coating — 70 to 90 percent silica content bonds into the rubber rather than sitting on the surface as an oil film.
        • High-gloss wet look — leaves a smooth, glossy finish across tyre sidewalls and plastic trims.
        • Two to four month service life — one application of the FB2-TSIOG-500 holds through multiple washes before the sidewall needs recoating.
        • Extreme hydrophobic properties — repels water, dirt and debris, so road spray beads off instead of soaking into the rubber.
        • Non-browning formula — the sidewall keeps its colour rather than fading or turning brown under UV exposure.
        • Self-levelling — the coating spreads out as it sets, so there is no need to buff the finish back for evenness.
        • Layerable once cured — a second coat over a fully cured first coat adds performance, longevity and depth of gloss.
        • Prevents contamination — the cured surface resists dirt pickup, so tyres stay presentable between full details.
        • Unpainted plastics and rubber trim — the FB2-TSIOG-500 works on exterior rubber trims and unpainted plastic surfaces as well as tyres.
        • Surface preparation required — the tyre must be cleaned before application or the coating will not fully adhere to the rubber.
        • Set time before driving — allow 30 to 60 minutes for the dressing to dry, otherwise the FB2-TSIOG-500 will sling off the tyre.
        • 500ml bottle with tyre pad — supplied with a tyre pad, with a detail brush or paint brush suggested for large off-road tyres.

        Where to use

        • Work ute and van presentation — the FB2-TSIOG-500 keeps sidewalls dark and glossy on vehicles that park in front of paying customers.
        • Weekend car detailing — a quarterly application replaces the weekly wipe-on dressing routine on a daily driver.
        • Show and display vehicles — layered coats build the deep wet-look sidewall finish expected on a judged car.
        • 4WD and off-road tyres — applied with a detail brush, the coating reaches into the blocks and lettering on oversized tyres.
        • Caravans, trailers and boat trailers — tyres that sit parked for long stretches hold their colour instead of going chalky.
        • Fleet vehicle turnaround — a two to four month coating cycle suits vehicles washed often but detailed rarely.
        • Exterior rubber and plastic trim — the FB2-TSIOG-500 restores gloss to unpainted plastic mouldings and rubber weather seals.

        The FB2-TSIOG-500 is formulated for tyres, unpainted plastics and exterior rubber trims, and Fireball does not list any other surfaces for it. The tyre must be scrubbed clean first, because the coating will not fully adhere to a contaminated sidewall. Do not drive before the dressing has set, and allow the full 30 to 60 minute dry time so the product does not sling onto the panels.

        (FB2-TSIOG-500)

        The FB2-TSIOG-500 is formulated for tyres, unpainted plastics and exterior rubber trims. Fireball does not list any other surfaces for the coating, so keep it to sidewalls, unpainted plastic mouldings and rubber trim rather than painted panels or glass.

        Clean the tyre thoroughly first, because the coating will not fully adhere to a contaminated surface. Shake the bottle to mix, then apply a small amount to a tyre pad or applicator and spread it evenly across the sidewall. Wipe back or move to another tyre if too much goes on.

        The coating holds for two to four months and withstands multiple washes in that time. Its high SiO2 content bonds into the rubber rather than sitting on the surface, which is why it outlasts a wipe-on water-based dressing. Once fully cured, the coating can be layered for longer life.

        An SiO2 coating carries silica polymer, in this case 70 to 90 percent, which bonds into the rubber and self-levels as it sets. A standard dressing leaves an oil film on the surface that washes off quickly. The silica version resists water, dirt and UV fading for months.

        Allow 30 to 60 minutes for the dressing to dry or set completely before moving the vehicle. Driving too early causes the product to sling off the tyre and onto the paintwork. Longer set times are sensible in cool or humid conditions.

        Yes, the tyre must be cleaned before application or the coating will not fully adhere to the rubber. Scrub the sidewall to strip off old dressing, brake dust and road grime, then let it dry. A properly cleaned tyre is what gets the full two to four month service life.

        The 500ml bottle is supplied with a tyre pad for application. For large off-road tyres with deep blocks and raised lettering, Fireball suggests using a detail brush or paint brush instead, which pushes the coating into the recessed areas the pad cannot reach.

        The Fireball FB2-TSIOG-500 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.

        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.

        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand FIREBALL
        SKU FB2-TSIOG-500
        Barcode # 8809569641363
        Package Weight 0.510kg
        TYPE VALUE
        Type Wheel Coating
        Brand Fireball

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products
        Mercator SPB04U | Ikuü Wi-Fi 4 Socket Power Board | 2 USB 4.2A
        Mercator SPB04U | Ikuü Wi-Fi 4 Socket Power Board | 2 USB 4.2A

        $49.50 $45.00 ex. GST

        See Alternative
        Fireball FB2-NAPBR | Nappa Cleaning Brush
        Fireball FB2-NAPBR | Nappa Cleaning Brush

        $23.95 $21.77 ex. GST

        Avol UPS-C1000-L | 1000VA Line Interactive UPS | 600W
        Avol UPS-C1000-L | 1000VA Line Interactive UPS | 600W

        $197.99 $179.99 ex. GST

        See Options
        Energizer UE10050CCBK | 10,000mAh Powerbank Black | 3 Charge Ports
        Energizer UE10050CCBK | 10,000mAh Powerbank Black | 3 Charge Ports

        $49.45 $44.95 ex. GST

        Fireball FB2-NAPCO-500 | Nappa Coat Ceramic Dressing | 500ml
        Fireball FB2-NAPCO-500 | Nappa Coat Ceramic Dressing | 500ml

        $36.30 $33.00 ex. GST

        Notify Me
        Klein Tools 55580 | Tradesman Tumbler Insulated Thermoses | 590ml
        Klein Tools 55580 | Tradesman Tumbler Insulated Thermoses | 590ml

        $65.94 $59.95 ex. GST

        Oricom TPMS10-6E | Tyre Pressure Monitoring System W/ 6 Sensors | App Control
        Oricom TPMS10-6E | Tyre Pressure Monitoring System W/ 6 Sensors | App Control

        $314.55 $285.95 ex. GST

        See Alternative
        Dynamic Technology DTP2001 | Ergonomic Mouse Pad With Wrist Rest | Black
        Dynamic Technology DTP2001 | Ergonomic Mouse Pad With Wrist Rest | Black

        $9.89 $8.99 ex. GST

        Notify Me