Search Results:
Search Results:
Search Results:
Search Results:
The push-button ejection system saves time on repetitive drilling tasks by quickly clearing cores, which improves productivity.
The SPEED™ Arbor is optimised for Reload holesaws with core eject and may not be compatible with other brands.
13 holesaws total - 8 Deep Cut HSS Cobalt (20, 22, 25, 32, 40, 51, 73, 92mm) and 5 Multicut TCT (20, 25, 32, 73, 92mm).
Yes. The HSS Cobalt saws are ideal for metal, while the TCT saws are suitable for timber, plastic, and other construction materials.
The kit includes 18 saws: 11x HSS Cobalt (16–92mm) and 7x TCT Multicut (20–92mm), covering the most-used sizes.
It’s designed specifically for Re-Load SPEED™ holesaws to enable the core eject feature, though standard fit may vary with other brands.
Mounted on a wall bracket (ideally in the master bedroom), the RACP can be removed from its magnetic holder and used like a remote. Its simple interface makes it intuitive for anyone to operate, giving electricians an easy way to deliver smarter, more convenient alarm systems.
The RCP pairs with any compatible RF wireless smoke alarms, including both red original and red professional models (RF-enabled). Hardwired alarms require an RF module.
The RACP gives homeowners instant control of RF wireless smoke alarms – silence nuisance alarms or run system tests with a single press. Available at Sparky Direct.
It can wirelessly control up to 40 Red RF smoke alarms.
Yes, but only if each alarm includes the RFMOD wireless module for RF communication.
The colour temperature switch is located internally on the NLS 20355, ensuring a secure and tamper-resistant adjustment during installation.
Yes, the NLS 20355 supports both surface mounting and suspension, offering flexibility for different ceiling types.
No, the NLS 20355 LED batten is not dimmable. It’s designed as a fixed-output lighting solution.
It can wirelessly interconnect with up to 24 PSA RF-compatible devices, forming a robust and fully synced alarm system.
The built-in relay supports 5A at 240VAC or 30VDC, allowing you to connect strobes, buzzers, exhaust fans, or other 240V-compatible alerting devices.
Yes. It can integrate hardwired PSA models like LIFHA240, LIF5800ACF, and LIFCO240 into your wireless network when installed correctly.
Yes, the Domus 56035 is removable and replaceable, making it ideal for future style updates.
It’s a film cover only. You’ll need an existing AIRSWAY 56013 or 56014 controller to use it.
The 56035 is specifically designed to fit the wall controller included in the Domus AIRSWAY models 56013 and 56014.
Yes, thanks to RF interconnection, when one alarm detects smoke, all connected alarms will sound, alerting you throughout the house. With the optional wireless RACP controller, you can silence the alarm remotely—no need to grab a broomstick or climb a ladder to turn it off.
Testing is easy, do it monthly using the test button; clean dust/insect guards occasionally (use a vacuum or soft brush). Replace the unit at the end of life (10 years).
You can mount it (screw it into the ceiling or wall using the twist base), but if mains work or hard-wiring is required, get a licensed electrician.
It is powered by a sealed 3 V lithium battery designed to last up to 10 years without needing battery replacement.
The R10RFP uses a photoelectric sensor, which is highly effective at detecting slow-smouldering fires. Recommended and approved in QLD.
Yes, it features built-in RF interconnection, allowing seamless wireless integration with other alarms. If you need to connect it with a hard-wired alarm, you'd best pair it with RFMOD for the wireless module. This module is then installed in the RSDUALP.
The system can then be tested, hushed and will help locate the triggering alarm remotely via the RACP wireless wall controller.
The main difference is that the R10RFP is designed for professionals with fewer false alarms; it has a dual mesh system to keep insects out of the sensor chamber. The R10RFP is also smaller in diameter than the R10RF, measuring just 120mm. Nobody likes false alarms in the middle of the night.
Install 2–3 metres from fuel-burning appliances, close to ceilings but at least 150 mm below them, and within hearing range of bedrooms.
Yes. It is designed for both wall and ceiling installation. Ceiling units should be at least 300 mm away from walls.
Avoid areas with draughts, high humidity (like bathrooms), near vents, behind curtains, or in extreme hot/cold spots.
When networked, if one PSA alarm activates, all linked alarms sound. This ensures you hear alerts anywhere in the house.
The alarm has LED indicators for power, low battery, and alarm status. It also includes a Test/Reset button for easy checks.
Test regularly, ideally monthly, by pressing the Test button to confirm the alarm sounds.
The CO sensor is designed for a 7-year lifespan. Replace the alarm at the end of that period.
The built-in rechargeable lithium battery keeps the unit operating, so protection remains active.
The LIFCO240 sounds four beeps, a pause, then repeats four beeps when CO is detected.
Yes. It is ideal for homes and rental properties with gas heaters, fireplaces, or other fuel-burning appliances. Always confirm compliance with state rental safety laws.
| Feature | Major Tech MTS16 | Shelly 1 Gen3 |
|---|---|---|
| Control | Major Tech Hub App (iOS/Android), Bluetooth fallback, voice control (Google, Alexa) | Shelly app, web UI, voice assistants, cloud/local API |
| Connectivity | Wi-Fi (2.4 GHz 802.11 b/g/n), Bluetooth 5.1 LE | Wi-Fi (802.11 b/g/n), Bluetooth 4.2 |
| Energy Monitoring | Yes – real-time and historical usage tracking | No (Gen3 doesn’t include power monitoring) |
| Smart Functions | Countdown, schedules, cycle timers, random, inching timers | Flexible app scheduling, automation via third-party platforms |
| Load Rating | 16A max / 3100W resistive | 16A AC, 10A DC |
| Voltage Range | 90–264 V AC | 110–240 V AC, 12–48 V DC |
| Form Factor | 42 × 42 × 22 mm (compact, fits behind switches/sockets) | 37 × 42 × 16 mm (ultra-compact) |
| Protection Features | Over-voltage shutdown, overcharge cut-off (auto-off if <3W for 40min), child lock | Overheating protection |
| Compliance | IEC / SANS / ICASA / LOA / CE | CE, RoHS (RCM compliance may vary in AU) |
| Operating Temp | -25°C to 55°C | -20°C to 40°C |
| Mounting | Behind existing switch/socket, junction box | Behind wall switch/socket, junction box |
The MTS16 includes built-in energy monitoring and Bluetooth failover for reliability, while the Shelly 1 Gen3 focuses on compact size and can be used with DC power supply.
Yes. The app lets you set countdowns, daily schedules, random timers, and other automation routines.
Yes. The app displays real-time and past energy usage so you can track consumption easily.
Yes. It automatically switches to Bluetooth mode, so you can still control it via the app locally.
Our products are compatible with almost all existing homes, apartments, and buildings. The MTS16 Smart Switch Module is installed behind your existing light switches and power points.
To unlock the smart features, you’ll also need a Wi-Fi router, internet connection, and/or Bluetooth.
A neutral cable is required at the switch or power point.
Yes, when connected through the app, it integrates with smart home platforms like Alexa and Google Assistant
The Major Tech Hub app handles remote access, energy monitoring, and automation features.
Yes, it’s designed for retrofit installs behind standard switch plates.
With proper maintenance and periodic replacement of wear parts, it can deliver reliable service for many years in tough environments.
No. It is simple to operate, though following site safety practices is recommended.
Yes. Its stainless steel build makes it resistant to corrosion, ideal for outdoor and marine applications.
Replace the blade and jaw components. This is a normal part of maintenance and helps extend the tool’s working life.
Its ergonomic handle design helps reduce fatigue, though regular breaks are recommended for extended tasks.
The adjustable tension mechanism allows you to fine-tune for each job. Start with a lower setting and adjust until the tie is secure without over-tightening.
It supports most heavy-duty ties, including 4.6mm and 7.9 mm wide. For wider or specialist ties, check compatibility before use.
Yes. Its stainless steel construction and replaceable parts make it suitable for frequent use on demanding sites.
The built-in cutter trims ties flush, which helps minimise sharp edges and improves safety.
The FTL-20500 is designed for straightforward operation, tension and cut happen in one motion, reducing effort for the user.
Yes. The housing is silicon-free and label-free, making it safe for sensitive areas.
The Gelbox adds some bulk but is compact enough to fit into most junction boxes and ceiling cavities.
Yes. IPX8 means it is tested for protection against continuous water immersion under defined conditions.
Yes. Its IPX8 rating and wide temperature tolerance make it suitable for outdoor and wet environments.
You can, but the Gelbox is single-use. If reopened, both the gel and housing must be replaced.
Very easy, just place the connector inside and snap it shut. No tools, tapes, or sealants are needed.
No maintenance is required once installed. It provides long-term protection until the connection needs rewiring.
You can open it, but it is single-use only — the entire unit must be replaced if opened.
Yes. The enclosure is moisture-resistant and silicon-free, making it safe for use in high-humidity spaces like bathrooms.
Yes. Its IPX8 rating and wide temperature range make it suitable for outdoor and wet locations.
The Gelbox must be replaced in full. It is a single-use design, and no gel-only refills are available.
Very easy, place the connector inside and snap the box closed. No tapes, gels, or extra sealing steps are required.
No. At only 18.4 g, it is very lightweight and only adds minimal bulk.
The Size 3 version provides more space for 4 mm² connectors and is useful where multiple connections or larger assemblies need protection.
Yes. It works down to −55 °C and up to +85 °C, covering both freezing and hot climates.
Yes. With its IPX8 waterproof rating and wide temperature tolerance, it performs reliably outdoors.
You can, but the Gelbox is single-use. Once opened, it must be replaced with a new one.
Very simple, place the connector inside and snap the enclosure shut. No tapes, sealants, or tools are required.
As it is designed specifically for Wago inline 221 Series connectors, other connectors may not fit or seal properly.
Yes. Being silicon-free and label-free, it does not release residues or require special handling.
It is VDE-tested and built for long-term use across a wide range of indoor and outdoor environments.
Yes. Its IPX8 waterproof rating makes it suitable for outdoor, irrigation, and farm installations.
Yes. You can open the Gelbox for inspection, but if the gel is removed, the enclosure must be replaced.
Very easy! Just insert the inline connector and snap the housing shut. No tools or extra sealing products are required.
It activates almost instantly! Within 0.2 seconds of power loss.
LiFePO4 batteries typically last several years with regular testing, though replacement cycles depend on usage and maintenance.
Very easy. Just press the built-in test switch or check the LED indicator for status.
Yes. The product comes with two lens options — one for open areas and one for corridors.
The 2 W SMD LED provides strong illumination for safe evacuation in both corridor and open area applications.
It’s commonly used in hallways, stairwells, corridors, and open indoor spaces that require compliant emergency lighting.
Only if installed in a suitable Clipsal weatherproof or rated enclosure.
Yes. It fits Clipsal Classic, 2000 Series, and Standard range plates.
Yes. It is designed as a modular mechanism that slots into compatible Clipsal wall plates.
It can be wired for either one-way or two-way operation.
Yes. It supports motor loads up to 100 W, making it suitable for small fans or appliances.
It can control general lighting, including fluorescent fittings up to 8 A.
It is designed specifically for inline Wago 221 Series connectors and may not fit alternatives.
Yes. The compact 19.8 g housing is lightweight and designed for tight spaces.
Yes. It operates reliably between −55 °C and +85 °C, so it can handle both freezing and hot climates.
Yes. Its IPX8 waterproof rating makes it suitable for wet environments like bathrooms, outdoor setups, and irrigation systems.
If reopened and gel is removed, it must be replaced in full since gel-only refills are not available.
Very easy! Just insert the inline connector, close the housing, and the lock-in system holds it securely.
Yes. The silicon-free, label-free build makes it safe in sensitive environments where residues could cause issues.
You’ll need to replace the entire Gelbox since Wago doesn’t supply gel-only refills.
It’s designed for Wago 221 connectors up to 6 mm². Other brands or sizes may not seat properly.
Yes. Its IPX8 waterproof rating and polypropylene housing make it suitable for outdoor jobs and damp areas.
You can open the housing to check connections, but if the gel is disturbed the whole unit must be replaced.
Yes. The snap-lock design means you just insert the connector and close the housing — no tools, tape, or gel mixing needed.
It’s made for panels up to 2.5 mm thick; thicker panels may not be compatible.
Yes. It is rated at 15 A, making it suitable for higher-load equipment than a standard 10 A outlet.
Installation must be done by a licensed electrician to ensure compliance and safety.
With its compact Ø38 mm design and white finish, it provides a neat, low-profile look.
It suits both home and workplace applications, provided a 15 A connection is required.
Yes. The flat pin design matches standard Australian plug types.
It’s commonly fitted into panels, enclosures, or equipment where a flush, low-profile 15 A outlet is required.
It’s designed for Wago 221 connectors up to 6 mm². Other connectors may not fit properly.
Yes. It’s tested to perform reliably in both very cold and hot conditions.
Yes. Wago doesn’t supply gel-only refills, so the complete Gelbox must be replaced.
Absolutely. Its IPX8 waterproof rating means it performs well in outdoor, bathroom, and irrigation setups.
You can open the Gelbox for inspection, but once the gel is disturbed the unit must be replaced.
Yes. Just snap the housing shut around the connector - no special tools or messy sealants are needed.
Yes. With its IPX8 rating and durable polypropylene build, it handles wet and exposed conditions reliably.
You can reopen it, but once the gel is removed or disturbed, the whole unit must be replaced.
Unlike tape or gel pots, it offers a clean, silicon-free enclosure that installs quickly and stays neat.
Slightly, the Size 3 housing is larger to accommodate 6 mm² connectors, but it’s still compact enough for most junction boxes.
Yes. The housing can be reopened for inspection, but if the gel is disturbed you’ll need to replace the unit.
Very straightforward! Insert the connector, snap the lockable housing closed, and it’s sealed without needing tools or extra sealants.
Yes. With 23 AWG solid copper conductors, HDPE insulation, and CAT 6 electrical specs, it delivers reliable high-speed data transfer.
It has a robust jacket for durability, but remains flexible enough to handle bends within the specified installation guidelines.
Unlike standard indoor cables, it is gel-filled and moisture-resistant, making it suitable for outdoor and underground conditions.
Yes, the gel-filled PE jacket is designed for underground use, but many installers still prefer conduit for extra protection.
Yes, if you need to run data cables outside or underground, such as to a shed or external office.
It’s commonly used for outdoor and underground data cabling where standard indoor CAT 6 cables would be at risk of moisture damage.
You can replace just the cover with the WBSSP1 instead of buying a full new switch.
The polycarbonate build is designed to resist fading and maintain its gloss finish.
The cover is just a snap on fit, gently press the cover onto the existing grid and it will snap on.
Yes. At just 14 mm depth, it provides a modern slimline profile.
The cover is built from gloss white polycarbonate, offering durability and resistance to fading.
It is a single gang switch cover that allows quick replacement of worn or damaged covers without altering the switch mechanism.
The WBSSP2 is a 2 gang cover, so check your existing plate has two switches before purchasing.
Yes. The gloss white is consistent across the Silhouette range for a uniform look.
No. The snap-on design means you simply push it onto the grid for a secure fit.
Definitely. With IK08 impact resistance and strong polycarbonate material, it’s built to last.
It sits close to the wall with a neat, modern appearance that suits new builds and renovations alike.
Yes. The WBSSP2 is designed so you only swap the cover, leaving the mechanism untouched.
The WBSSP3 is a 3 gang plate cover, check your existing switch grid has three switches before purchasing
It can be used in dry indoor areas of kitchens, but it’s not designed for wet zones like shower areas.
Yes. The finish is consistent across the Silhouette range for a uniform look.
No. The cover simply snaps onto the grid - no tools are required for fitting.
It gives a neat, flush appearance that suits modern interiors and refurbishments.
Yes. This product replaces only the cover, leaving the mechanism and wiring untouched.
Yes. The cover can be unclipped and swapped quickly.
Check if your current plate has four gangs. The WBSSP4 suits the Hager WBSSV1.
Very quick! The snap-on design makes fitting the switch cover hassle-free.
Definitely. Its IK08 impact rating ensures it can handle knocks in high-traffic spots.
It creates a smooth, flush finish that blends nicely with modern interiors.
Yes. It swaps out the cover only, leaving the wiring and mechanism untouched.
Yes. You can unclip and replace it without affecting the switch wiring.
The WBSSP5 is designed for five-gang grids such as the Hager WBSSV5
No. The snap-on design allows for a quick, tool-free fit.
Very durable! The IK08 rating ensures it resists knocks in busy areas.
It provides a smooth, low-profile look that blends neatly with modern wall finishes.
Yes. It’s just a cover replacement, the wiring and mechanism remain untouched.
No. It clips straight onto the grid with a snap-on action, no screws needed.
Yes. It can be unclipped and swapped without disturbing the switches underneath.
Very tough, the IK08 impact rating means it’s built to withstand knocks in busy areas.
Yes, as long as it’s in a dry indoor area. It’s not intended for wet zones or outdoor installs.
It gives a clean, low-profile finish that blends well with modern interiors.
Yes. It replaces just the faceplate, leaving the existing switches and wiring untouched.
It comes with a 12-month replacement guarantee.
The recessed body requires a cutout of 6.6 × 7.3 cm with a recess depth of 7 cm.
No. The UA4213WH is non-dimmable.
It produces 140 lumens with a CRI greater than Ra84, ensuring good colour accuracy.
Yes. Using CTS technology, you can select 3000K, 4000K, or 5500K at installation.
It is a 3W recessed LED wall light made for hallways, stairwells, theatres, and similar spaces where subtle step or passage lighting is required.
It’s recommended to test smoke alarms monthly using the test button to ensure reliable operation.
Press and hold the test/hush button; the alarm will sound to confirm it’s active.
The alarm chirps every 32 seconds when the battery needs replacing.
Press the hush button to mute it for up to 10 minutes; the LED will flash every 8 seconds during this mode.
It uses a twist-on base plate, mount the plate to the wall or ceiling, then twist the alarm into place.
Yes. Its compact design and 9 V battery power make it suitable for caravans and motorhomes.
The photoelectric sensor and insect guard reduce false alarms, but placement away from kitchens is still recommended.
Yes, the sealed 10-year lithium backup keeps the alarm running during blackouts.
No, mains-powered alarms like the RSDUALP must be installed by a licensed electrician under Australian law.
Most Red smoke alarms come with a 10-year warranty to match the battery life.
Yes, it is designed to meet Australian Standard AS 3786 and carries RCM compliance for local use.
The photoelectric sensor is designed to detect slow-smouldering fires, providing early detection.
The dual mesh insect guard helps stop insects from entering the unit, which reduces the likelihood of false alarms.
Yes, it supports both hardwired and RF module interconnection for linking multiple alarms.
The RSDUALP operates on 240V mains power with a 3V lithium backup battery that lasts up to 10 years.
It weighs approximately 22.2kg per 100m.
Yes. With its durability, certification, and 10 mm² conductors, it works for residential, commercial, and utility-scale PV installs.
This product comes in a 100 m roll with metre markings for quick measuring and cutting.
Yes. It is UV stabilised and flame-retardant, making it reliable for exposed rooftop use.
Both the insulation and sheath are electron beam cross-linked compounds for durability and heat resistance.
The cable uses tinned copper Class 5 conductors in accordance with IEC 60228.
Yes. You can create scenes, groups, timers, and even sync lighting to music through the PIXIE PLUS app.
Yes. You can use voice commands for hands-free control of your lighting.
No. It’s designed for plug-and-play use, so most users can set it up themselves.
Yes. With internet access, you can manage your PIXIE devices remotely through the app.
Very simple! Just plug it into power, connect to WiFi or LAN, and use the PIXIE PLUS app to pair devices.
It acts as the central hub, linking PIXIE devices together so you can control them from your phone or by voice.
Each pack contains 100 yellow connectors.
The polycarbonate body is impact-resistant and holds up against solvents and jobsite handling.
Yes. It works with both stranded and solid copper conductors within 19–22 AWG.
No. Once crimped, the connection is permanent and the connector cannot be reused.
Yes. The gel insulation seals the conductors, helping prevent corrosion and failures.
Just insert unstripped wires and crimp, no stripping or twisting is required.
Each pack includes 100 red connectors.
Yes. It is compatible with both stranded and solid copper conductors in the 19–22 AWG range.
It’s ideal for phone, data, and communication cabling where three wires need to be joined quickly.
It offers good moisture protection but is generally used in sheltered enclosures or junction boxes.
Yes. The gel seals the joint to block out water and extend service life.
You just push in the wires and crimp, no stripping or twisting needed.
Yes. Black is widely used to mark annual checks, with NSW including it in its extended colour rotation.
They give a clear, visible record of test dates in line with AS/NZS 3760 requirements.
They can be applied to tools, leads, and appliances. Basically anything that requires test and tag checks.
Yes. They’re valid nationwide, but be mindful that NSW uses a broader monthly colour schedule.
Yes. Each pack includes 100 self-laminating tags plus a pen so you can start using them straight away.
Black tags are used for yearly test and tag checks across most of Australia, including NSW where it also forms part of the rotation system.
They can be applied to appliances, tools, and leads that require compliance testing.
They provide a clear record of testing dates in accordance with AS/NZS 3760.
Yes. They’re built tough for industrial and commercial environments.
Yes, but keep in mind NSW follows a slightly different rotation schedule.
Yes. Each Tesla TTAGRED pack has 100 tags plus a pen, ready to use on-site.
Red tags indicate inspection periods - December to February in most states, or January and September in NSW.
Definitely. They’re suitable for appliances, extension leads, and tools used on construction or industrial sites.
Yes. With 100 tags and a pen per pack, they’re a practical choice for contractors and safety teams.
They provide a clear visual record of test dates in line with AS/NZS 3760 standards.
Not quite, most states use them for September–November, but NSW uses them in June and October.
Yes. Each pack has 100 tags plus a pen, so you can fill out details on-site.
They’re used for tests done in September–November nationwide, or in June and October if you’re in NSW.
Yes. They’re built tough to handle busy worksites and harsh conditions.
They provide a visible record of test dates in line with AS/NZS 3760 standards.
Mostly yes, but NSW has its own system where green is used in April and August.
Yes. Just write the details, apply the tag, and seal the laminate - no extra equipment needed.
Yes. Each pack comes with 100 tags and a pen for immediate use.
They’re used March–May across most states, or in April and August for NSW inspections.
Yes. Just fill in the details, stick the tag on, and press down the laminate seal.
They provide a visible record of test dates in line with AS/NZS 3760 requirements.
Not exactly - in NSW they’re used for February and July, while other states use them for June–August.
The laminate overlay protects the notes from smudging, solvents, and rough handling.
Yes. Each Tesla TTAGBLUE pack comes with 100 tags and a pen ready for site use.
They’re used June–August across most states, or in February and July if you’re in NSW.
It’s manufactured without lead, so it’s suitable for both professional and household environments.
The rubber adhesive provides a firm grip that stays in place, even on tricky surfaces.
It works well for HVAC sealing, trade tasks, and general home repairs where a strong hold is needed.
Each roll is 30 metres long, so it provides plenty of tape for multiple projects.
No. Like most duct tapes, once removed it loses adhesive strength, so fresh tape should be used.
Yes. The PVC backing bends easily, making it ideal for wrapping and sealing around awkward areas.
It’s heavy-duty, lead-free, and built with strong adhesion for trade and household reliability.
Yes. It’s strong but practical, you can cut or tear it easily when needed.
Absolutely. It works for everything from patching ducts to small household repairs.
Each roll provides 30 metres of tape, enough for multiple projects.
Yes. The flexible PVC backing makes it easy to apply even on uneven or curved areas.
No. It’s fine for general sealing but shouldn’t be used as an electrical insulator.
It lets you pass HDMI cables directly through a wall plate, reducing clutter and leaving a professional finish.
Yes. It handles 4K at 60Hz with HDR, so it’s ideal for modern displays.
No. It clips straight into compatible wall plates like Digitek and Clipsal designs.
Absolutely. It’s built to carry high-bandwidth 18Gbps signals, suitable for offices and professional installs.
It means you can play protected 4K content from devices like Blu-ray players and streaming boxes without issues.
The gold-plated connectors provide strong conductivity and resist corrosion for consistent performance.
It provides two standard outlets with added RCD protection and a clear status light, supporting safer power use in clinical areas.
The rocker switches are paired with an indicator light, so the status is always visible.
The outlet is designed for RCD-protected circuits, but an external RCD device is still required.
It’s a standard Australian 250V, 10A double GPO.
Licensed electricians fit the ML2025-RD in hospitals, healthcare facilities, and specialist environments.
Made from strong moulded plastic, it holds up well in busy, demanding environments such as corridors or rooms in hospitals and various healthcare facilities.
This LED Downlight Kit is designed for general illumination in residential and commercial buildings. They are a reliable and cost-efficient downlight.
Yes, the downlight has a frosted diffuser that provides a soft diffused output and reduces glare.
Yes, the integrated colour temperature selector switch lets you easily choose your preferred colour temperature during installation.
You can select between 3000K, 4000K, or 6000K with just a flick of a switch.
Yes, the updated 7W design of this downlight produces the same level of brightness while using 22% less power, making it more energy-efficient.
Yes, you can.
This downlight is IC-4 rated, which means it’s designed to sit safely against walls, timber, or other building materials.
You can also cover it with insulation without any risk of overheating or damage.
It’s built to handle these conditions, so you can install with confidence.
Yes, the TPDL1C3 downlight can be installed both indoors and outdoors.
Its plastic IP44-rated front protects it against dust and splashes of water, making it durable and safe in many different environments. This means you can confidently use it in living areas, bathrooms, or even sheltered outdoor spaces. It’s built to handle everyday conditions, giving you reliable performance wherever you choose to install it.
Yes, the TPDL1C3 7W Tri-Colour Dimmable LED Downlight Kit is a reliable product. It’s made by Clipsal, a well-known brand with a strong reputation for quality and expertise in lighting. You can count on it to deliver dependable performance, and it also comes with a 3-year warranty for extra peace of mind. This means you’re covered if anything goes wrong, giving you confidence in your purchase.
You can use the TPDL1C3 7W Tri-Colour Dimmable LED Downlight Kit in many different spaces.
It’s great for living rooms, bedrooms, kitchens, and offices, as well as retail stores and other areas that need reliable general lighting.
Its dimmable feature also lets you adjust the brightness, making it versatile for both everyday tasks and creating a relaxed atmosphere.
This flexibility makes it a practical choice for a wide range of applications.
Great choice! Clipsal LED downlights are a reliable option, The TPDL1C3 offers energy efficiency, long life, and high-quality light output. It comes with features, including dimmable and tri-colour options, so you can find the perfect fit for any room in your home or business.
With Clipsal’s trusted reputation and solid warranties, you can buy with confidence knowing you’re getting safe and dependable lighting.
Buy the Clipsal LED Downlight at Sparky Direct for the best price and fastest shipping Australia-wide.
Yes, at Sparky Direct, we sell Clipsal TPDL1C3 LED Downlights at bulk special prices.
It allows you to join a plain conduit to a screwed fitting, keeping cable runs neat and secure.
It’s built to resist cracking, corrosion, and wear. Making it suitable for long-term use indoors or out.
Yes. It works just as well in homes as it does in commercial sites.
Yes. It complies with AS/NZS 2053, ensuring safe and reliable performance.
Yes. It’s built to handle demanding environments with reliable performance.
Yes. The PVC construction makes it suitable for outdoor conduit runs.
The sensor combines a 180° front-facing PIR with a 360° bottom sensor for full coverage.
The PIR48 can be installed on walls or ceilings for flexible placement.
It can pick up movement up to 12 metres away, making it suitable for wide driveways or long hallways.
Yes. With an IP65 rating, it is built to withstand rain, dust, and outdoor conditions.
Yes. It automatically switches on lights when movement is detected, helping deter unwanted visitors.
Yes. Along with time and lux settings, you can fine-tune its sensitivity for best performance.
It is a 24-hour DIN-rail mountable analogue timer for automating electrical loads such as lighting, pumps, and geysers.
Yes. It features manual override modes: automatic, permanent on/off, and temporary switching.
Yes. With 96 pins, you can set up to 96 intervals per 24 hours in 15-minute steps.
The built-in 200-hour backup keeps your programmed schedule safe until mains power returns.
It supports heavy loads up to 16A resistive, 4A inductive, and 1000W of LED lighting.
Yes. It’s DIN-rail mountable, making it simple to add into standard switchboards.
The PIR44B detects motion up to 12 metres, with adjustable sensitivity.
Yes. The swivel head offers 45° horizontal and 180° vertical adjustment for precise aiming.
Typical applications include corridors, driveways, entrances, and outdoor walkways.
The PIR44B is designed for flexible wall or ceiling installation.
Yes. Its IP65 weatherproof housing is made for rain, dust, and tough environments.
Yes. You can adjust the lux level and time delay, plus angle the sensor head for precise coverage.
Yes. It can be installed both outdoors and indoors, depending on the requirements.
In driveways, gardens, entry points, workshops, and commercial sites needing wide coverage.
Yes. The PIR49 has a time delay adjustment from 10 seconds to 15 minutes.
Yes. Its IP65 rating ensures reliable performance in rain, dust, and outdoor conditions.
Between 8 and 14 metres, with adjustable sensitivity to suit the area.
Yes. The lux control lets you choose the light level at which the sensor activates.
It provides one normally open and one normally closed contact, giving extra flexibility for interlocking and feedback.
Yes. It’s commonly used to feed signals into PLCs or automation controllers.
Yes. It’s ideal for providing auxiliary status indication on motor starter circuits.
Yes. By providing additional contacts on the same device, it simplifies wiring in control panels.
Yes. It’s designed for durability in demanding electrical environments.
It protects small motors from overload, reducing the risk of downtime and costly repairs.
The adjustable dial lets you match the relay’s range (1–1.6A) to the motor’s rated current.
Yes. It’s ideal for motors that run fans, blowers, or conveyors over long periods.
No. It uses thermal delay to match how motors heat up, giving better protection and fewer nuisance trips.
If set too low, it may trip unnecessarily. If set too high, it won’t protect the motor properly - always match it to the motor rating.
Yes. It’s designed to handle smaller motors in HVAC setups reliably.
It prevents small motors from overheating by tripping when current draw exceeds safe levels for too long.
Adjust the dial within the 4–6A range to match your motor’s rated current.
No. It uses a thermal delay to mimic real motor heating, reducing false trips and offering accurate protection.
Yes. You can reset it manually or configure it for automatic reset.
Yes. It’s well-suited for conveyors, blowers, and fans that operate for long periods.
If set too low, it may nuisance trip. If set too high, it may not protect the motor effectively — always match to the motor’s rated current.
When ceiling-mounted, it covers 360° with a 6m range. From walls, it offers 120° with up to 8m range.
Yes. It has adjustable Lux sensitivity (3–2000 Lux) and a time delay range from 10 seconds to 8 minutes.
The sensor head is IP65 rated for damp or outdoor use, while the controller unit is IP20 for indoor protection.
Yes, the sensor head is IP65 rated, meaning it can handle damp or sheltered outdoor areas, while the controller must remain indoors.
Yes. You can set the time delay anywhere between 10 seconds and 8 minutes.
It supports 400W LED/CFL and 800W incandescent lighting.
It gives reliable protection against overload, reducing the risk of overheating and costly downtime.
Use the built-in dial to match the relay’s 2.5–4A range to your motor’s rated current.
No. It allows for short start-up surges and only trips if the overload is sustained, mimicking how a motor heats up.
Yes. It’s designed for continuous-duty equipment that needs consistent protection.
If set too low, the relay may trip too often; if set too high, the motor may not be protected properly. Always match the motor rating.
Yes. By tripping on overload, it protects motors from damage and keeps systems running reliably.
It prevents damage from overloads, keeping motors safe and avoiding costly repairs.
Adjust the front dial within 1.6–2.5A to match your motor’s nameplate rating.
No. It accounts for short inrush currents and only trips on sustained overloads.
Yes. It’s designed to protect equipment that runs for extended periods.
If set too low, it may nuisance trip. If too high, the motor may not be properly protected. Always match to rated current.
Yes. By tripping before damage occurs, it prevents breakdowns and extends service intervals.
It prevents overload damage, keeping equipment safe and reducing maintenance costs.
Just adjust the front dial to match your motor’s rating between 6 and 8 amps.
No. It ignores brief inrush currents at startup and only reacts to sustained overloads.
You can either reset it manually or set it to auto reset depending on your needs.
Yes. It’s designed for fans, conveyors, and compressors that run for long hours.
By tripping before damage occurs, it stops motors from burning out under stress.
It delivers 30 000 lumens at 4000K natural white, with a high efficiency of 150lm/W.
It has a wide 110° beam angle for broad, even coverage.
Yes, the ALF200NW is IP65 rated for weatherproofing and IK08 rated for impact resistance.
It’s ideal for security lighting, warehouses, workshops, sports areas, and general outdoor coverage.
Yes. The mounting bracket rotates 360°, making it easy to aim the beam where it’s needed.
The ALF200NW floodlight features built-in 4kV surge protection, helping to shield it from voltage spikes.
It’s designed for motors drawing 7-10A, giving reliable overload protection for pumps, compressors, and conveyors.
No. It ignores short inrush currents and only reacts to ongoing overloads.
Use the dial to match the relay’s setting to your motor’s nameplate current between 7A and 10A.
Yes. You can reset it by hand or configure it to reset automatically.
Yes. It’s suitable for protecting blowers and fans under heavy load.
Too low may cause nuisance trips, too high could leave the motor unprotected. Always match to motor rating.
It prevents costly damage by tripping before motors overheat under heavy loads.
Turn the front dial to set between 9A and 13A, matching your motor’s rated current.
No. It allows for short inrush currents and only trips on sustained overload.
Yes. It’s built for heavier-duty motors found in industrial environments.
Too low causes nuisance trips; too high risks leaving the motor unprotected.
Yes. It supports both manual and auto reset, depending on your needs.
It’s sized for motors in the 12–18A range, providing dependable overload protection for heavy-duty use.
Use the built-in dial to set the relay between 12A and 18A to match your motor’s rating.
No. It ignores brief inrush currents at startup and only trips on sustained overloads.
Yes. It’s built for motors that handle high-demand, continuous workloads.
Yes. It’s commonly installed to prevent costly downtime on production lines.
Too low could cause nuisance trips; too high may leave the motor unprotected.
The floodlight operates at 4000K natural white, giving balanced and clear light.
Yes. It has 4kV surge protection to safeguard against power spikes.
The housing measures 282 × 318 × 50mm.
Yes. With IP65 protection and an aluminium housing, it’s built to withstand rain, dust, and heat.
The angled bracket allows 360° rotation, making it easy to aim the light exactly where it’s needed.
At 15,000 lumens, it delivers more than enough light for carparks, workshops, and large outdoor spaces.
It helps avoid costly breakdowns by tripping before motors overheat under heavy load.
Turn the dial to match your motor’s rated current between 17A and 25A.
No. It ignores brief inrush currents and only reacts to sustained overloads.
You can reset it manually or use the auto reset feature, depending on your needs.
Yes. It’s designed for motors that draw higher current in continuous operation.
Yes. It’s effective at preventing overload failures on production lines.
The ALF50NW operates at 4000K, producing a natural white light suitable for most environments.
The floodlight is IP65 and IK07 rated, ensuring it is resistant to outdoor use.
Yes. The unit is equipped with 4kV surge protection.
At 7,500 lumens, it easily lights up gardens, driveways, and mid-sized outdoor spaces.
It allows 360° rotation so you can angle the light exactly where needed.
It is rated for 50,000 hours of operation.
It delivers 2,800 lumens from a 20W LED source, providing efficient lighting for small to medium spaces.
The ALF20NW produces 4000K natural white light, offering clear and balanced illumination.
The unit is IP65 and IK07 rated, making it Ideal for outside use.
Yes. It has 2kV surge protection for extra safety in unstable power conditions.
The angled bracket allows 360° rotation so you can direct the light exactly where it’s needed.
With a 50,000-hour rated life, it offers years of dependable service.
It produces 1,400 lumens from a 10W LED source, offering efficient illumination for smaller spaces.
The ALF10NW operates at 4000K natural white, delivering clear, neutral lighting.
The floodlight is IP65 rated, ensuring protection against dust and water ingress for outdoor use.
Yes. It has built-in 2kV surge protection.
The ALF10NW measures 120 × 144 × 34mm.
Yes. The 360° adjustable mounting bracket lets you aim the light exactly where you need it.
A ceiling rose is a small electrical fitting that connects the wiring in your ceiling to a light fixture.
It acts as a junction point, allowing safe connection of the supply cables to your light and its switch. In many homes, the ceiling rose also includes terminals that link multiple circuits together, making it a simple but important part of the lighting system.
Its main job is to keep the wiring secure, neat, and safe while providing a solid mounting point for your light fitting.
With 2NO + 2NC contacts, it offers more flexibility for complex control or safety needs.
Yes. It’s designed to manage multiple control points in one unit.
Yes. It provides extra contacts for indication or interlock in starter circuits.
No. Its clip-on design keeps it compact and efficient in control panels.
Yes. It provides extra contacts that can be wired into emergency stop or controlled shutdown systems.
Yes. At 4,500 lumens, it provides enough brightness for yards, parking areas, and commercial spaces.
Yes. With an IP65 rating and corrosion-resistant housing, it’s built for all-weather use.
The 360° adjustable bracket allows you to direct light exactly where needed, not just straight down.
It gives the same brightness at a fraction of the power use, making it more efficient.
It offers a 120° beam angle for wide-area coverage.
It uses SMD 2835 LED chips for efficiency and consistent light output.
By lighting up the cavity and using the yellow tongue deflector, it helps electricians drill accurately the first time, reducing the need for rework and repeat trips.
Yes. At 130 lumens on high mode, it gives more than enough focused light to clearly see inside wall spaces.
A quick 60–90 minute USB-C charge will get it ready for over four hours of work, so you can easily top it up during breaks.
Yes. It’s purpose-built for a 90mm cutout, sitting securely while you work.
Yes. Its compact size makes it easy to slip into a tool bag without taking up space.
Electricians working on residential wall installs, especially when speed and precision are critical, will find it especially useful.
Yes. You can run some at 80W with a wide beam for aisles and others at 150W with a narrow beam for higher ceilings.
Definitely. At up to 170 lumens per watt, it’s far more efficient than metal halide or fluorescent high bays.
No. With selectable CCT, you can choose a warmer 3000K for comfort or cooler 5000K for bright, task-oriented lighting.
The rotating lens lets you set the beam angle, and the chassis is designed to fit standard high bay installation methods.
Very little. With a 50,000-hour lifespan, once installed it should run reliably for years.
They are designed to protect Clipsal Iconic wall plates during painting and renovation, preventing paint build-up or drips.
They are manufactured from translucent green plastic, making them lightweight and reusable.
Yes, they are designed to be reusable if handled carefully, though long-term durability depends on use.
No. You only need to remove the Iconic cover, then slip the protector over the wall plate.
They are designed to fit over Clipsal Iconic powerpoint and switch plates, after the skin is removed.
Wall plates can become marked or need cleaning/replacement if paint gets on them.
Yes. Cat 6 UTP supports up to 1Gbps over 100m runs with ease.
Yes. It’s fully backwards compatible, so no problem mixing with Cat 5e systems.
Absolutely. Great for streaming, gaming, and smart home connections.
No. This model is for indoor use. Go for an outdoor-rated or gel-filled cable if you need weather protection.
Yes. It’s built for structured cabling and commercial installs.
Yes. It’s metre-marked and feeds cleanly, saving time during installs.
It delivers 2,700 lumens from a 30W LED source, ideal for outdoor and commercial lighting.
It runs at 4000K natural white, offering balanced and clear illumination.
The LFW-30NWS is IP65 rated, providing dust and water protection for outdoor conditions.
It is made from a die-cast aluminium body that resists corrosion, and features 4mm glass for added toughness.
Yes. The 360° bracket lets you tilt and rotate the light to suit your setup.
With 30,000 hours of life, it’ll run for years without fuss.
It outputs 1,800 lumens from a 20W LED source, making it suitable for residential and small commercial outdoor spaces.
It delivers 4000K natural white light for balanced, clear illumination.
The LFW-20NWS is IP65 rated, ensuring it is both dustproof and waterproof for outdoor conditions.
The 360° adjustable bracket allows positioning beyond standard wall mounting.
Die-cast aluminium, which is corrosion-resistant and designed for effective heat dissipation, and a 4mm strengthened glass cover for added durability.
It has a 30,000-hour operational life.
It produces 900 lumens from a 10W LED, making it suitable for smaller outdoor spaces.
It delivers 4000K natural white light, offering balanced, neutral illumination.
Yes. With an IP65 rating, it is dustproof and waterproof for outdoor use.
A die-cast aluminium housing that resists corrosion and manages heat effectively, and a 4mm strengthened glass lens for extra toughness.
Yes. The bracket allows 360° adjustment so you can angle it exactly where needed.
With a 30,000-hour lifespan, it should last for years without fuss.
Yes. You can adjust the time delay anywhere from 5 seconds to 10 minutes.
It detects motion up to 12 metres away with a 180° wide field of view.
It’s IP54 rated, which means it can handle splashes and dust but isn’t designed for heavy rain.
Yes. The 360° bracket gives you plenty of flexibility to aim both light and sensor.
Yes. The PIR sensor activates the light immediately when it detects motion within its range.
It outputs 900 lumens from a 10W LED source, ideal for residential and light commercial outdoor spaces.
It delivers 1,800 lumens from a 20W LED source, ideal for outdoor safety and security lighting.
It provides 4000K natural white light for clear, balanced visibility.
The range is adjustable from 2 to 12 metres with 180° wide coverage.
Yes. The time delay is user adjustable, from a few seconds up to 10 minutes.
It is IP54 rated, giving resistance to dust and splashing water.
A corrosion-resistant aluminium body with a 4mm strengthened glass cover.
Yes. It comes complete with the overload relay already fitted for quick setup by an electrician.
Yes. It’s well-suited to pumps, compressors, and fans within the 5.5kW range.
The built-in thermal relay cuts power if the motor draws too much current for too long, preventing overheating.
Yes. You can fine-tune the relay between 9A and 13A to suit different setups.
Not at all. It’s also used in commercial setups, workshops, and anywhere a 5.5kW motor needs safe control.
While it mainly guards against overloads and short circuits, external surge protection is recommended for unstable power supplies.
The ENSA LHB-G-BM is a Bluetooth-enabled microwave motion sensor that provides wireless motion-based control and dimming for ENSA highbay lighting in industrial and commercial environments.
No, it communicates wirelessly via Bluetooth mesh, allowing for full control without running additional signal or control cables between fixtures.
Yes, the LHB-G-BM is compatible with most ENSA Bluetooth-enabled highbays, making it ideal for both retrofit upgrades and new installations.
The sensor provides up to 60 metres of Bluetooth range in open environments, making it ideal for large-scale connected lighting systems.
The LHB-G-BM offers 360° sensing coverage and can detect motion at mounting heights of up to 12 metres, ideal for large, open spaces like warehouses or factories.
It connects directly via Bluetooth to compatible ENSA highbay fittings. Once paired, it sends dimming and on/off commands securely without relying on Wi-Fi or the internet.
No, the switch works completely offline, using local Bluetooth communication managed by a built-in microprocessor.
A single switch can wirelessly control up to 100 ENSA highbay fittings, making it ideal for warehouses and large commercial areas.
The ENSA LHB-G-BD is a Bluetooth-enabled wall switch designed for wireless on/off and dimming control of ENSA highbay lights, removing the need for extra control wiring.
Yes, it features a sliding dimmer block for smooth manual adjustment and supports programmable brightness presets for quick recall.
It provides modern, wire-free control, secure communication, and scalable fixture management, making it a smart, low-maintenance upgrade for industrial lighting systems.
Yes, the Shieldlux 20370 has selectable wattage, allowing you to set the output between 26W and 40W to balance light levels and energy use.
No, the Shieldlux 20370 uses a non-dimmable driver, ensuring consistent brightness and stability in demanding applications.
Tri-CCT lets you select your preferred colour temperature: 3000K (warm white), 4000K (neutral white), or 6500K (cool white) directly on the fitting during installation.
The NLS 20370 Shieldlux is built for high-impact or public environments, providing bright, reliable lighting in areas like schools, car parks, stations, and commercial sites where vandal resistance is essential.
Extremely, it’s IK10 rated for impact resistance, with a tough polycarbonate housing and 316 stainless-steel screws, protecting it from tampering or damage in exposed areas.
The Small Template is for single vertical or horizontal outlets, while the neXlevel Template helps you mark stacked or side-by-side layouts quickly and evenly.
They’re designed to accurately mark and align GPO and switch cut-outs on gyprock or tiled surfaces, helping you save time and achieve consistent results.
Yes, they’re suitable for both gyprock (plasterboard) and tiled walls, and can be used with a hand saw, multi-tool, or the GreenDonkey Gyp55 and Dia55 hole saws.
In most cases, while a small amount of marking may still be needed, these templates eliminate much of the manual measuring and alignment, making layout work much faster.
No, they can be used traditionally and use a gyprock saw for manual cut-outs, but they’re designed to pair perfectly with the Gyp55 and Dia55 hole saws for cleaner, faster drilling.
The combo includes two precision marking tools, the Small Template for single GPOs or switches, and the neXlevel Template for aligned, multi-outlet layouts with adjustable spacing.
It produces 2,700 lumens from a 30W LED, providing strong illumination for outdoor spaces.
It operates at 4000K natural white, delivering a clear, balanced light.
Yes. It includes a PIR sensor that detects body heat and movement for automatic activation.
The sensor range is adjustable from 2 to 12 metres, with 180° coverage.
Yes. The time delay is adjustable from 5 seconds to 10 minutes.
Yes. The sensor sensitivity can be set between 2–2000 Lux to operate only when required.
It’s designed to save time and improve accuracy, giving you cleaner, repeatable cutouts with less marking, measuring, and rework—ideal for both rough-ins and fit-offs.
The GDUltimate Bundle includes four tools: the Dia55 Diamond Hole Saw, Gyp55 Gyprock Hole Saw, GDsmall Template, and neXlevel Template, everything you need for clean, accurate GPO cut-outs in both tile and gyprock.
Yes, the Dia55 handles ceramic, porcelain, and stone tiles, while the Gyp55 is designed for gyprock or plasterboard, allowing seamless switching between materials.
Minimal marking is required, but the GDsmall and neXlevel templates make it faster and far more precise, helping to avoid misaligned or oversized openings.
The Dia55 uses the angled half-hole drilling method, reducing the risk of tile cracking and producing a clean, accurate finish for flush GPO installs.
The bundle gives you a complete, systemised solution, combining templates and hole saws designed to work together. This allows faster installs, neater results, and consistent spacing across every job.
Not at all, the EPDM base is flexible, making it easy to cut, shape, and contour around roofing profiles or multiple cable entries as needed.
The flashing is made from premium EPDM rubber, which is flexible, UV-resistant, and weatherproof, ensuring a durable seal even under extreme Australian conditions.
Its oversized base and UV-stable EPDM design make it ideal for sealing around solar panel cable feeds, where long-term weather resistance and neat presentation are essential.
The 30830 features a much larger 280 × 450mm base, providing extra surface coverage and stability, especially important for solar and multi-cable applications on pitched roofs.
It seals around pipes and cables ranging from 0mm to 35mm, making it suitable for most solar conduit or small pipework used in PV installations.
The NLS 30830 is purpose-built for solar installations, creating a watertight seal for conduit and cable penetrations on metal or tiled roofs, preventing leaks and UV damage over time.
The EPDM rubber is highly flexible, allowing it to contour to roof pitches, corrugations, and irregular surfaces without compromising the seal.
It’s constructed from high-grade EPDM rubber, which is flexible, UV-stable, and heat, ozone, and water-resistant, making it perfect for Australian outdoor conditions.
It has a 135 × 135mm square base, offering a stable platform for reliable bonding and weather sealing.
The 30829 features a larger 135 × 135mm base and wider sealing range (5–55mm), providing extra coverage and grip for medium-sized roof penetrations.
It seals penetrations from 5mm up to 55mm in diameter, making it suitable for small to mid-sized pipes, electrical conduits, and HVAC lines.
The NLS 30829 provides a watertight seal around pipes, conduits, and cables passing through roofing surfaces, protecting against leaks and weather exposure.
Yes, the flexible rubber base conforms easily to the contours of metal or tiled roof surfaces, ensuring a reliable watertight fit.
The raised knobs act as trimming guides and help maintain alignment, giving a cleaner cut and tighter seal when fitting the cone around a pipe or cable.
It features a 100 × 100mm base, offering compact coverage for small or tight roofing areas.
The 30828 includes integrated positioning knobs around the cone, allowing for precise trimming, better grip, and a more stable seal during installation.
It suits diameters from 0mm up to 35mm, ideal for solar, electrical, or antenna cable penetrations.
The NLS 30828 Roof Dektite Flashing is used to create a weatherproof seal around small roof penetrations, such as pipes, conduits, or cables, protecting against leaks and environmental damage.
The NLS 30827 is used to create a weatherproof seal around roof penetrations, such as pipes, conduits, or cables, preventing leaks and protecting against the elements.
It’s suitable for pipes or cables from 0mm up to 35mm in diameter, making it ideal for small penetrations like electrical conduits or solar cabling.
It has a 100 × 100mm base, providing a compact footprint for tight installation areas or small roof openings.
Yes, the flexible EPDM cone and base are designed to conform to most roof profiles, making it compatible with both metal and tiled roofing systems.
It’s made from high-quality EPDM rubber, which is UV-resistant, flexible, and durable, ensuring long-term performance on metal or tiled roofs.
Minimal, just inspect the seal periodically during roof servicing to ensure the flashing remains secure and free of debris or sealant wear. The material’s durability usually means years of maintenance-free performance.
The FavorCOOL FC-Q-565 is a waterproof cleaning cover designed for safely washing and servicing wall-mounted split system air conditioners without making a mess.
It fits standard wall-mounted units between 100–130cm wide, making it suitable for most residential and small commercial split systems.
The cover captures and drains dirty water through a built-in outlet and 9ft hose, protecting walls, floors, and nearby furniture from splashes and runoff.
It’s made from PU-coated waterproof jacquard fabric, which is durable, flexible, and easy to clean for repeated use.
Yes, the FC-Q-565 includes support plates that help maintain the cover’s shape and keep it securely in place during cleaning.
Yes, it comes with the main waterproof curtain, four smaller waterproof films, support plates, and a 9ft drain hose, ready for immediate setup.
It delivers 1,400 lumens from a 100W LED, making it effective for outdoor security and area lighting.
The built-in 3.2V, 10Ah LiFePO4 battery provides around 12 hours of runtime per charge.
A 10W, 5V monocrystalline solar panel designed for efficient charging.
Yes. With IP65 protection, it resists dust and water exposure.
Yes. The remote allows timer settings and control adjustments.
No. It’s 100% solar-powered, perfect for off-grid or remote areas.
The Oricom TPMS10-6E is a wireless tyre pressure monitoring system that tracks tyre pressure and temperature in real time, helping prevent blowouts, extend tyre life, and improve fuel efficiency on-road or offroad.
The base kit includes six external sensors, but it can monitor up to 10 tyres when paired with additional sensors through the free Oricom app, perfect for vehicles towing caravans or trailers.
The display is solar-powered for convenience and sustainability, with a USB backup charging option for cloudy days or extended trips.
Yes, the Oricom mobile app connects via Bluetooth, allowing you to view pressure, temperature, and alerts directly from your smartphone in real time.
It issues audible and visual warnings for slow or fast leaks, high temperatures, and low or high pressure, keeping you informed before issues become dangerous.
Definitely, it includes Normal and Offroad modes, allowing you to set custom pressure thresholds for different terrains and vehicle setups.
The Sauermann Op-20 is designed for removing condensate water from wall-mounted split system air conditioners, keeping indoor units dry and preventing water damage or leaks.
The Op-20 uses Sauermann’s patented piston pump with an integrated, insulated tank; it’s quieter, more compact, and prevents external condensation buildup, making it perfect for indoor spaces.
It delivers a maximum flow rate of 20L/h with a 10m discharge head, making it suitable for split systems up to 20kW in capacity.
Yes, it’s rated at ≤22dB(A), which is quieter than a whisper, ideal for bedrooms, offices, or meeting rooms where low noise is essential.
Absolutely, it features a reversible design, allowing left or right-side installation to suit your specific AC layout or service requirements.
Yes, it includes an alarm cable that can trigger system shutdown in case of a fault or overflow, helping protect both the air conditioner and the surrounding area.
The Clipsal 357PAN7D20 screws are designed for fast, secure fastening into light steel, timber, and other general construction materials, making them ideal for electrical installations, framing, and general trade work.
No, the self-drilling drill point tip cuts directly into metal or timber without a pilot hole, saving time and ensuring a cleaner finish.
Drill-point screws are engineered for penetrating metal surfaces, while needle-point screws are better suited to timber or softer materials, where a sharper point helps grip.
Each screw measures 7 gauge by 20mm, making them a compact, versatile option for light-duty and electrical fastening applications.
They’re compatible with both Square Drive No.1 (SQ1) and Phillips No.2 (PH2) driver bits, so they work with most standard power tools and hand screwdrivers.
They’re best suited to indoor or covered outdoor use, while the zinc plating adds protection, they’re not designed for coastal or fully exposed environments.
The Klein Tools A-68426S is designed for safe assembly and disassembly of MC4® solar connectors used in photovoltaic systems, helping installers make quick, precise, and compliant terminations.
Yes, they’re insulated and rated up to 1500V DC, meeting IEC 60900:2018 and ASTM F1505-16(2021) standards for safe use on live solar circuits when used correctly by trained personnel.
Unlike basic plastic tools, the A-68426S features steel inserts for durability and accuracy, combined with insulated TPE handles for professional-grade electrical protection and comfort.
They’re specifically designed for MC4®-style solar connectors, ensuring a perfect fit and secure engagement. Using them on non-MC4 connectors isn’t recommended for safety or performance.
The set includes two insulated wrenches, allowing both the male and female MC4 ends to be held and tightened safely at the same time.
The steel core prevents flex and deformation during repetitive use, ensuring the wrench maintains a precise fit on MC4 connectors over time.
No, the self-drilling drill point tip allows direct penetration through light-gauge steel or timber without the need for pilot holes, saving time on-site.
Drill-point screws like these are designed to cut through metal efficiently, while needle-point screws are better suited for timber or softer materials, where a sharp tip can grip easily.
They’re compatible with both Square Drive No. 1 (SQ1) and Phillips No. 2 bits, making them easy to install with most standard screwdrivers or power tools.
Each screw measures 7 gauge by 25mm with an 8mm pan head, providing excellent hold and a neat, flush finish once installed.
They’re best suited for indoor or covered outdoor areas. The zinc plating offers good corrosion protection, but isn’t designed for coastal or fully exposed environments.
They combine fast self-drilling performance, dual-drive flexibility, and corrosion-resistant strength, delivering reliable results for electricians and trades who need efficient, tidy fastening every time.
A drill point screw can cut through metal directly without the need for a pilot hole, while needle point screws are better for softer materials like timber or gyprock where a sharp tip provides easier penetration.
No, the self-drilling drill point tip eliminates the need for pre-drilling, reduces installation time, and ensures clean, accurate fastening straight through steel or timber.
They can be driven using either a Square Drive No.1 (SQ1) or Phillips No.2 bit, giving flexibility for most standard power tools and driver bits.
Each screw measures 7 gauge by 30mm, offering excellent grip and holding strength for light structural and electrical applications.
They’re best suited for indoor or covered outdoor use, as the zinc plating provides moderate corrosion resistance but isn’t designed for coastal or fully exposed environments.
They combine fast self-drilling performance, dual-drive flexibility, corrosion resistance, and a professional finish, making them a dependable go-to screw for electricians and general trades alike.
It outputs 700 lumens from a 50W LED, providing clear illumination for smaller outdoor areas.
It uses a 3.2V, 4Ah LiFePO4 battery that provides over 12 hours of runtime on a full charge.
A 6W, 5V monocrystalline solar panel designed for efficient charging.
Yes. A remote allows timer control and convenient operation.
The SFX-50C is IP65 rated, making it dustproof and waterproof for outdoor use.
No. It’s fully solar-powered, perfect for areas without wired power.
Yes. The built-in overload relay shuts the motor off if it runs too hot from overcurrent.
The IP42 rating provides protection against solid objects and light moisture, making it suitable for indoor industrial areas.
Yes. The overload relay allows adjustment between 9–13A to suit your motor’s rating.
Yes. It combines motor starting with overload protection in one unit.
It handles overloads and short circuits, but a separate surge protector is recommended for unstable supply conditions.
The Atom AT9046-WH-TRI offers high brightness (up to 2160 lumens) and a wide 90° beam angle, making it perfect for illuminating open-plan areas, large rooms, and commercial fit-outs evenly.
The fitting includes a Tri-CCT switch on the back that allows you to choose between 3000K warm white, 4000K neutral white, or 5700K cool white before installation, giving flexibility for any room setting.
Yes, it comes with a phase-cut dimmable driver compatible with most leading and trailing edge dimmers, allowing smooth brightness control.
This model suits a 160–170mm ceiling cutout, making it ideal for larger ceiling openings or when replacing older high-output fittings.
Absolutely, it’s IC-4 rated, which means it can come into direct contact with insulation without compromising safety or performance.
Yes, it comes with a phase-cut dimmable driver pre-wired with a 600mm flex and plug, ready for quick installation by a licensed electrician.
The Atom AT9045-WH-TRI offers Tri-CCT flexibility, dimming control, and strong 1420lm output, making it ideal for both residential and commercial lighting where brightness, colour tone, and energy efficiency matter.
Simply use the Tri-CCT switch located on the back of the fitting or driver to select between 3000K warm white, 4000K neutral white, or 5700K cool white before installation.
Yes, it includes a phase-cut dimmable driver that’s compatible with most leading and trailing edge dimmers for smooth brightness adjustment.
It suits a 120–130mm cutout, making it a great fit for standard ceiling cut sizes and easy retrofit installations.
Yes, it’s IP54 rated on the front face, offering protection against splashes and moisture, which makes it suitable for bathroom zones, kitchens, and covered outdoor areas.
Absolutely! It’s IC-4 rated, meaning it can safely come into direct contact with ceiling insulation without risk of overheating or fire hazard.
Each screw measures 7 gauge x 20mm, offering a compact and secure fixing length perfect for tight spaces and light-duty installations.
They’re easy to drive, corrosion-resistant, dual-bit compatible, and provide a clean finish, exactly what tradespeople need for fast, reliable fastening across multiple materials.
They feature an 8mm pan head, offering a wide bearing surface for firm grip and a clean, professional appearance once installed.
They’re suitable for covered or semi-protected environments, but not for marine or fully exposed outdoor use due to the limits of zinc plating.
These screws are designed for light-gauge steel, timber, and sheet materials, making them highly versatile for electrical, construction, and maintenance applications.
No, the self-drilling needle point tip eliminates the need for pre-drilling or pre-punching, saving time on-site while ensuring smooth, clean starts.
Yes, it comes with the PARTI CORD kit and the shade included, so it’s ready for installation by a licensed electrician.
No, it’s IP20 rated, meaning it’s intended for indoor use only and should not be installed in damp or exposed environments.
It uses a standard E27 lamp holder and is compatible with LED, filament, or energy-saving globes up to 60W (globe not included), giving flexibility in brightness and ambience.
Yes, it includes a 1.8m adjustable black cord, allowing you to customise the hanging height for flat or sloped ceilings.
This model measures 39cm in diameter, making it slightly larger than the 31cm versions, perfect for creating a stronger lighting statement in open areas like kitchens or dining rooms.
The Oriel OL86263 Warehouser Pendant features a large 39cm matte black shade with a white interior for excellent light reflection, giving it a bold industrial look that complements both modern and rustic interiors.
The Clipsal 357PAN7N25-500 screws are perfect for switchboard installs, cable trays, conduit clips, and general mounting, offering reliable fastening in light-gauge steel, timber, and general construction materials.
No, they feature a self-drilling needle point that allows for fast, clean installation without the need to pre-punch or pre-drill holes.
Each screw measures 7 gauge by 25mm, making them ideal for medium-duty trade work and electrical applications where a shorter fastener is preferred.
Yes, the screws are made from carbon steel with a yellow zinc-plated finish, providing excellent corrosion resistance for indoor and sheltered outdoor use.
Yes, they’re commonly used by electricians for mounting switchboards and enclosures, and for fixing conduits or brackets, thanks to their fast installation and reliable hold.
They’re best suited for indoor or covered outdoor environments. While zinc plating provides protection, they aren’t designed for direct exposure to the elements or marine conditions.
The Oriel OL86262 Warehouser Pendant combines timeless industrial styling with a textured white finish and excellent light reflection, making it ideal for both modern and vintage-inspired interiors.
It features a 31cm diameter metal shade, providing balanced task lighting that works perfectly above benches, tables, or bar areas.
Yes, it includes a 1.8m adjustable cord suspension, allowing flexible installation on flat or sloped ceilings to suit your layout.
The pendant uses a standard E27 lamp holder (max 60W), giving you the option to install LED, filament, or energy-saving globes depending on your desired brightness and colour temperature.
Yes, the white inner finish enhances light reflection, helping distribute light evenly across your space for brighter, cleaner illumination.
No, it’s IP20 rated, meaning it’s suitable for indoor use only, away from direct moisture or weather exposure.
The Clipsal 357PAN7N30-100 Self-Drilling Screws are designed for fast, secure fixing into light steel, timber, and general construction materials, ideal for electrical, framing, and fit-out applications.
No, their needle-point tip provides a self-drilling action that allows quick starts and clean, fastening without pre-punching holes.
They’re compatible with both Square Drive No. 1 (SQ1) and Phillips No. 2 bits, providing flexibility with standard trade tools.
They’re best suited for indoor or covered outdoor areas, while zinc-plated parts resist corrosion, prolonged exposure to moisture or coastal air isn’t recommended.
Each box contains 100 screws, ideal for smaller jobs, repairs, or light commercial work where bulk quantities aren’t required.
Yes, they work efficiently in soft and medium timber, providing clean, fast, and splinter-free fastening.
A variable-speed power drill or impact driver with an SQ1 or PH2 bit ensures clean, controlled fastening and reduces cam-out during installation.
They’re best suited to indoor or covered outdoor use, while zinc plating offers protection, they’re not recommended for direct exposure to coastal or harsh environments.
Each pack contains 500 screws, ideal for bulk use or high-volume installation work where consistent fastening quality is essential.
Yes, they’re commonly used for mounting switchboards, fixing conduit saddles, attaching brackets, and other electrical trade work requiring secure fixing.
No, the needle-point tip provides a self-drilling action that quickly penetrates timber and thin steel, eliminating the need for pre-punching or pilot holes.
They’re suitable for light-gauge steel, timber, PVC, and general building materials, offering flexibility for electricians and fit-out teams on site.
The Oriel OL86261 Warehouser Pendant combines industrial design with a modern matte black finish and bright white reflector interior, delivering a stylish yet functional light perfect for kitchens, cafés, and retail spaces.
The Warehouser features a 31 cm diameter metal shade, providing focused illumination while maintaining a compact, balanced look above benchtops or tables.
Yes, it includes a 1.8 m adjustable cord suspension, allowing you to set the perfect drop height for flat or sloped ceilings.
The pendant fits a standard E27 lamp (240 V), giving you the flexibility to choose your preferred LED, filament, or energy-efficient bulb (40–60 W equivalent, not included).
Yes, the white inner finish enhances light reflection, improving brightness and spread while maintaining a warm, inviting look.
It’s supplied as a PARTI CORD suspension kit with the Warehouser 31 cm shade, making installation quick and straightforward for a licensed electrician.
The Oriel OL41140BCH Remo 40 blends a classic alabaster-glass design with a low-profile brushed-chrome finish, offering soft, even illumination that suits both homes and commercial interiors.
It’s 40 cm in diameter and projects only 150 mm from the ceiling, making it ideal for rooms with low or standard ceiling heights.
The fitting has two E27 lamp holders, each rated up to 60 W, and is fully compatible with LED retrofit globes for energy-efficient lighting.
The Remo 40 is indoor-only and not moisture-rated, so it’s best installed in dry spaces such as bedrooms, lounges, and hallways.
It’s a flush-mount ceiling fitting that attaches directly to the ceiling and connects via hardwiring, providing a clean, streamlined appearance.
Installation must be completed by a licensed electrician to ensure correct wiring and compliance with Australian standards.
The Oriel OL7664WH Highgate offers the perfect blend of classic coach-style design and modern motion-activated functionality, giving you elegant illumination and added safety for entrances, verandas, and outdoor walls.
The built-in PIR sensor detects motion up to 5 metres within a 100-degree field of view, automatically switching the light on when movement is sensed.
Yes, the adjustable timer lets you set the light to remain on from 10 seconds to 10 minutes, depending on your preference and application.
No, the sensor is designed to activate only in low-light conditions, but you can fine-tune the sensitivity to adjust when it responds.
Yes, it’s IP44 rated, offering protection against splashing water and dust, making it suitable for covered outdoor areas like porches, verandas, or patios.
Yes, the fitting includes a manual override feature that allows you to keep the light on continuously when needed, such as for entertaining or cleaning.
No. It’s also suitable for workshops, commercial premises, and farms with three-phase equipment.
Yes. It comes with the thermal overload relay already installed for quick setup by an electrician.
It covers overload and short-circuit protection; surge protection should be added separately if required.
Yes. It’s built to protect and control larger three-phase motors in demanding environments.
The relay trips if the motor draws too much current for too long, stopping overheating and burnout.
Yes. It provides solid protection for most indoor industrial and commercial installations.
Yes. The built-in relay covers overload protection, reducing the need for extra components.
The Oriel OL7664BK Highgate combines a traditional coach-style design with a built-in PIR motion sensor, providing classic looks with modern automatic lighting for safety and convenience.
The integrated PIR sensor detects motion up to 5 metres away within a 100-degree field of view, perfect for entrances, porches, or side access areas.
Yes, the timer setting is adjustable from around 10 seconds up to 10 minutes, letting you control how long the light remains on after detecting movement.
By default, the sensor is activated only in low-light conditions, but sensitivity can be fine-tuned so it triggers based on your preferred ambient-light level.
It suits a single E27 lamp (max 42 W) and works perfectly with LED retrofit globes such as the Oriel A-LED-21104227 (sold separately).
Yes, it includes a manual override function that allows you to keep the light on continuously when required, such as during gatherings or cleaning.
The Major Tech MT350L leads are designed for use with the MT350, MT355, and MT312 testers, ensuring a secure fit and accurate performance across all three instruments.
They’re CAT II 250V rated, suitable for use on single-phase circuits and general distribution boards in residential and commercial environments.
Yes, they’re rated to handle up to 10 amps, making them reliable for high-demand test procedures without overheating or voltage drop.
Each lead is 1.75 metres long, giving plenty of reach when testing across switchboards, panels, or equipment racks.
Yes, the PVC sheath provides full insulation and flexibility, protecting users against accidental contact during live circuit testing.
Absolutely, they are RoHS compliant and designed in accordance with IEC and AS/NZS standards for professional testing applications.
The Oriel OL7662WH features a standard E27 screw lampholder, supporting up to 60W maximum or an LED equivalent such as Oriel’s A-LED-21104227 (sold separately) for efficient outdoor lighting.
Yes, it’s IP44 weather-rated, providing reliable protection against rain and dust. It’s ideal for porches, verandas, and exterior walls in most Australian conditions.
The Highgate Up Light is constructed from powder-coated aluminium with clear bevelled glass panels, combining durability with a classic, decorative finish.
The textured white powder coat resists corrosion and UV fading. If you’re near the coast, a quick rinse with fresh water every few months will help keep it looking new.
Yes, as a hardwired outdoor fitting, it must be installed by a licensed electrician to meet Australian electrical safety standards.
Yes, it’s compatible with most external PIR sensors, dusk-to-dawn switches, and timers, giving you automatic control if desired.
Yes, they’re IP44-rated, meaning they’re protected against rain and splashes. They’re perfect for patios, balconies, gardens, and covered outdoor spaces.
The LEDs emit a 3000K warm white glow, giving a soft, cosy light that’s ideal for relaxing or creating an inviting atmosphere.
The string is 12.6 metres long with 180 evenly spaced LEDs, giving you plenty of coverage for fences, pergolas, or feature walls.
They’re plug-in lights powered by a safe 31V DC low-voltage adapter, which is included in the box. Just plug them into a standard outlet and they’re ready to go.
No, this model is a single plug-and-play set, designed for simple, safe use without daisy-chaining.
They can stay outside under normal conditions, but for best longevity, it’s recommended to bring them in during extreme weather or long periods of non-use.
It’s designed for terminating data and communication cables into 110 IDC-style blocks, keystone jacks, and patch panels, perfect for Cat5e and Cat6 structured cabling.
The spring-loaded impact system delivers a consistent, professional termination every time, reducing hand strain and ensuring each wire seats cleanly in one motion.
Yes, the tool features adjustable impact tension with high and low settings, allowing you to fine-tune the force depending on the cable type or IDC block density.
The reversible 110 blade has two sides, one for cut and punch (trims excess wire as you terminate) and one for punch-only (when trimming isn’t needed).
Yes, blades are fully replaceable, and a spare can be stored in the twist-lock handle compartment, keeping replacements close at hand on site.
No, this model is designed specifically for 110-type IDC blocks. For Krone terminations, you’ll need a Krone-compatible punch down tool.
As with any hardwired outdoor light, installation must be carried out by a licensed electrician to ensure safety and compliance with Australian standards.
Yes, though for coastal or salty environments, Oriel recommends regular cleaning and maintenance to preserve the powder-coated finish over time.
The Highgate features a textured powder-coated aluminium body for corrosion resistance and clear bevelled glass panels that enhance the traditional lantern style.
No, globes are sold separately, giving you the freedom to choose brightness and colour temperature to suit your space.
Yes, the fitting is IP44 rated, meaning it’s safe for exterior walls, verandas, and covered areas exposed to rain or splashing water.
It suits a standard E27 screw-in globe, up to 60W maximum, or an LED equivalent such as Oriel’s A-LED-21104227 (sold separately) for an energy-efficient option.
No, the light only activates after dark when motion is detected, conserving energy. However, you can use the manual override to keep it on continuously if required.
The durable matte black metal faceplate offers good resistance to general outdoor conditions, though in coastal or salt-heavy environments, regular cleaning is recommended to prevent corrosion.
Yes, it’s IP44 rated, meaning it’s protected against rain and splashes, making it perfect for outdoor walls, porches, and covered walkways.
It’s compatible with a standard E27 globe (max 60W or LED equivalent). You can choose your preferred brightness or colour temperature depending on the atmosphere you want to create.
Yes, it includes a manual override function, so you can switch it on continuously from your wall switch when you want constant light, such as during gatherings or cleaning.
The Cheeta Wall Light features a PIR motion sensor that automatically switches the light on when movement is detected within 8 metres and 120°, then turns off after about 90 seconds with no further activity.
Yes. It’s practical anywhere a three-phase motor needs direct-on-line starting.
No. The built-in relay already provides the required overload safety.
Yes. It’s built for tough industrial and commercial environments.
Yes. The adjustable overload lets you set protection between 12–18A.
The overload relay cuts power if the motor runs too hot from sustained overcurrent, preventing burnouts.
Yes. It’s designed for pumps, compressors, and fans within the 7.5kW rating.
Absolutely! The entire 10-light extension uses just 6 watts total, making it an economical and eco-friendly way to expand your lighting.
It emits a soft 3000K warm white glow, creating a comfortable, inviting atmosphere for outdoor entertaining or hospitality areas.
Yes, the globes are IP65 rated for water and dust resistance, making them safe for outdoor use in rain or humidity. The connectors are also sealed for long-term reliability.
Each transformer supplied with the starter kit can support up to 20 metres (two kits total). If you need more coverage, a second starter kit is recommended.
Simply plug the waterproof joiners from the extension into the end of your existing 22082-06 light string. No tools, wiring, or cutting are needed; it’s a true plug-and-play setup.
No, the 22084-06 is an extension kit only and must be connected to the Brilliant 22082-06 Festoon Starter Kit, which includes the transformer and power plug.
Yes, it works with most trailing-edge dimmers, allowing smooth brightness control from full output down to a relaxed, low-light setting.
Yes, it’s IC-4 rated, so it can be safely installed in contact with insulation without affecting performance or safety.
Yes, it’s IP44 rated, which means it’s protected against splashes and moisture, making it suitable for use in bathrooms, laundries, and under covered eaves.
Absolutely. It’s a Tri-CCT model, so you can choose between 3000K warm white, 4000K neutral white, or 6000K cool white during installation to suit your space.
Yes, it’s designed for a 90mm ceiling cutout, making it ideal for retrofits or replacing older halogen fittings.
The TPDLLGBK uses a deep-recessed lens design that softens the beam and reduces harsh reflections, delivering comfortable illumination that’s easy on the eyes, perfect for living areas or workspaces.
Yes, it uses LED technology to deliver strong, consistent brightness while keeping energy use and heat output low.
The TPDLLG comes in a clean white finish, designed to blend seamlessly with most modern ceiling styles.
It outputs 750 lumens of neutral white light, offering bright, even coverage that’s ideal for living areas, hallways, and offices.
This downlight fits a standard 90mm ceiling cutout, making it a great choice for retrofits or replacements of older halogen fittings.
Yes, it’s fully dimmable with most trailing-edge dimmers, letting you easily adjust brightness to suit the time of day or activity.
The TPDLLG features a recessed optical lens and deep reflector design, which helps diffuse the light and reduce direct glare, providing softer, more comfortable illumination for everyday use.
Absolutely, the entire 10-light set uses just 6W total, offering stylish, low-cost lighting that’s easy on your power bill.
Yes, as long as the transformer is protected from direct weather (such as under an eave or cover), the lights can stay installed outdoors.
The LEDs emit a warm 3000K white light, which creates a soft, welcoming glow — perfect for outdoor entertaining or event lighting.
The kit includes 10 LED globes spaced along a 10-metre cable, giving you plenty of length for small courtyards, balconies, or decorative setups.
Yes, it’s built for indoor and outdoor use. The globes are IP65 rated for weather protection, and the transformer is IP44 rated, so it’s fine for outdoor covered areas or patios.
No need! It’s a DIY plug-and-play festoon kit, so you can plug it straight into a standard power point. No cutting or wiring is required.
The KZ059 is made from high-quality, insulated plastic, built to withstand electrical and mechanical stress inside distribution enclosures.
Yes, using busbar fork covers like the KZ059 supports AS/NZS 3000 and IEC 61439 compliance by reducing access to live parts.
While it may fit some similar fork-style busbars, it’s optimised for Hager systems, so compatibility with other brands isn’t guaranteed.
Yes, it’s designed to fit securely onto Hager fork busbars, ensuring a snug, reliable connection and consistent finish across switchgear assemblies.
It’s essential for electrical safety and compliance, preventing accidental contact with live conductors and helping installations meet AS/NZS wiring standards.
The KZ059 is an end-piece protective cover designed for fork-type busbars, providing insulation and safety at the exposed end of a live busbar within a switchboard or distribution panel.
It’s a surface-mounted fan that doesn’t need a ceiling recess, making it perfect for homes or apartments with low ceilings. It also combines a Tri-CCT LED light and a quiet DC motor in one unit.
It’s only 146mm high, making it one of the slimmest fans on the market, great for spaces where ceiling clearance is tight.
Yes, the included remote control manages everything: fan speed (6 settings), light dimming, timer, and reverse mode for summer or winter use.
The 40W LED light produces up to 4300 lumens, providing strong, even light suitable for most living areas.
The fan is constructed from durable plastic with PC blades and an opal diffuser, offering strength, stability, and a modern look.
Yes, the CLA VIFTU1 is available from Sparky Direct and can be delivered anywhere in Australia.
It handles overloads and short circuits, but external surge protection is recommended for unstable supply networks.
No. It’s also used in rural setups, large HVAC systems, and commercial facilities with single-phase motors.
No. The built-in relay provides the necessary motor overload protection.
Yes. The relay can be set between 18–25A depending on your motor’s requirements.
The thermal overload relay trips when current is too high for too long, shutting the motor off safely.
Yes. It is designed for motors up to 11kW and includes built-in overload protection.
The MT795 analyses all key aspects of power quality — including voltage, current, power factor, harmonics, transients, flicker, frequency, and imbalance. It helps identify losses, equipment stress, or inefficiencies in single- or three-phase systems.
It’s designed for licensed electricians, electrical contractors, energy auditors, and facility maintenance personnel who need detailed power quality analysis and accurate data logging for testing, commissioning, or fault-finding.
The built-in Wi-Fi connects to the Major Tech Power-X App, allowing you to monitor live readings, adjust settings, and generate reports remotely from your phone, tablet, or computer, no cable needed.
You don’t need a PC. The MT795 has a colour touchscreen for setup, waveform viewing, and data export directly from the unit.
It logs five readings per second, automatically recording minimum, maximum, and average values for detailed trend analysis.
The Power-X App can generate detailed load, harmonic, imbalance, and trend reports suitable for compliance records, maintenance documentation, or client reporting.
It’s a 4-pole isolator switch used to safely disconnect three-phase and neutral circuits, common in HVAC systems, pumps, motors, and other industrial equipment.
It means the switch isolates all active phases plus the neutral, ensuring complete circuit separation for maintenance or safety shutdowns.
Absolutely. It’s IP66 rated, offering full protection from dust, water, and weather — perfect for exposed or industrial environments.
Yes, the handle is padlockable, allowing electricians to lock off power securely during servicing or repairs.
It has two 25mm entries on the top and bottom, and includes 25–20mm reducers to suit a variety of conduit sizes.
Yes, Sparky Direct stocks the NLS 30894 and provides fast, reliable delivery Australia-wide.
The MT312 is a 3-in-1 tester that checks loop impedance, RCD/ELCB trip time, and polarity in 3-wire AC systems. It helps electricians verify wiring safety and circuit protection during installation or fault finding.
No, the test leads are sold separately. The MT312 is compatible with the Major Tech MT350L lead set, which is designed for plug-in connection and accurate testing.
The MT312 uses a quick colour guide: Green means good, Orange suggests a potential issue, and Red indicates a serious wiring or fault condition that needs attention.
It applies a controlled test load and measures how quickly the RCD or ELCB trips. The tester displays the trip time (up to 99.9ms) and sounds a buzzer when the device disconnects correctly.
The MT312 combines three key safety checks into a single unit —loop impedance, RCD/ELCB trip timing, and polarity-saving time—and reduces the need for multiple tools.
Yes, Sparky Direct sells the MT312 and delivers Australia-wide.
It’s designed to safely isolate power for outdoor equipment such as lighting, air conditioning units, and pumps during maintenance or service work.
It’s IP66 rated, which means it’s fully protected against dust and heavy water spray, perfect for outdoor or industrial environments.
It’s rated at 20A and 500V AC, suitable for general single-phase or light-duty industrial isolation.
Yes, the handle is padlockable, allowing electricians to safely isolate power during maintenance or repair work.
It includes two 25mm entry points at the top and bottom, plus 25–20mm reducers for flexible conduit options.
Yes, Sparky Direct stocks the NLS 30893 and delivers Australia-wide.
It gives off a bright 6500K daylight colour, clean and crisp, perfect for kitchens, offices, and areas needing clear visibility.
Yes, it works with most leading and trailing edge dimmers, giving smooth, flicker-free control over brightness.
Yes, the driver is included, so it’s ready for installation straight out of the box.
Yes, it’s IP44 rated, which means it’s splash-resistant and suitable for use in bathrooms, laundries, and under eaves.
It’s bright, efficient, dimmable, and comes with a driver, a simple, long-lasting replacement for old halogen or CFL fittings.
Yes, Sparky Direct stocks the NLS 20097 and offers fast delivery throughout Australia.
The NLS 30885 allows manual switching between two power sources in a three-phase system, such as mains and generator supply, or full isolation using the centre-off position for maintenance safety.
No, this model is a 4-pole device designed for three-phase circuits up to 400V AC. For single-phase systems, use the 2-pole NLS 30884 instead.
The centre-off (0) position disconnects both power sources, ensuring complete isolation of live circuits during service, testing, or downtime.
It’s rated at 63 amps, 400 volts AC, with a terminal capacity of 25 mm² and a tightening torque of 5 Nm, ensuring secure, high-current connections.
The front handle is clearly marked I / 0 / II, allowing users to see at a glance whether the system is on mains (I), isolated (0), or backup power (II).
Yes, Sparky Direct supplies the NLS 30885 and delivers Australia-wide.
It’s supplied with a suspension hook and chain for easy high-bay installation.
No. It uses a built-in Driver on Board (DOB) system, simplifying setup.
The unit is rated for 30,000 operating hours with minimal maintenance.
Yes. It has built-in 4kV surge protection against electrical spikes.
The unit is IP65-rated for dust and water protection, and IK08-rated for impact resistance.
It delivers 24,000 lumens from 200W, giving high brightness for industrial and commercial spaces.
The NLS 30884 allows you to manually switch between two power sources —typically mains and generator —or to isolate both completely using the centre-off position for safe servicing.
No, it’s a 2-pole single-phase switch designed for 230V AC systems only. For three-phase setups, use a 4-pole changeover switch, such as the NLS 30885.
The centre-off position (0) disconnects both incoming supplies, providing full isolation for maintenance or testing, ensuring no live power is present on the load side.
It’s rated at 63A, 230V AC, suitable for low-voltage circuits, and can perform up to 5,000 electrical and 50,000 mechanical operations over its lifetime.
The handle is clearly marked with I (Supply 1), 0 (Off), and II (Supply 2), making it easy to identify whether you’re on mains, isolated, or backup power.
Yes, Sparky Direct stocks the NLS 30884 and offers fast delivery anywhere in Australia.
It’s a heavy-duty weatherproof isolator made to safely disconnect power to motors, machinery, or switchboards in outdoor or industrial areas.
It’s IP66 rated, meaning it’s dust-tight and protected against powerful water jets, ideal for outdoor and wash-down locations.
The enclosure has twin 40 mm and 32 mm threaded entries on both top and bottom, giving you more space for larger conduits and easier cable access.
It’s rated at 63 A / 440 V AC and supports motor loads up to 28 kW (AC-23A) — suitable for most commercial and light-industrial applications.
Yes. The handle is padlockable, letting electricians isolate and lock circuits safely during service work.
Yes, Sparky Direct stocks the HPISWXL363 and offers fast, reliable delivery Australia-wide.
It has two built-in USB-C fast-charging ports, so you can charge phones, tablets, or other devices directly, without bulky adapters needed.
Yes. You can charge two devices at the same time, one port delivers up to 30 W, and the other up to 20 W.
Yes, it’s designed to fit standard Australian wall boxes, so it’s an easy swap for a regular power point.
It supports PD fast-charge technology, so it can quickly charge both Apple and Android devices that use USB-C cables.
Yes, it includes two standard 10 A sockets, so you can still plug in appliances while charging your devices.
Yes, Sparky Direct stocks the PUPP2USBGCC and ships Australia-wide with reliable delivery options.
It’s ideal for driveways, paths, backyards, and business entrances, anywhere you want bright, automatic lighting for safety and convenience.
Yes, the built-in motion sensor switches the light on when movement is detected within its 180° field of view.
You can adjust the detection range between 5 and 12 metres, depending on your setup.
Yes, both heads can swivel and tilt, so you can direct light exactly where it’s needed, whether on paths, walls, or entry points.
Use the SENS, TIME, and LUX dials. SENS sets detection range (up to 12 m), TIME controls how long the light stays on (10 sec – 5 min), and LUX sets when it operates — sun for day testing, moon for night use. Mount about 2 m high and angle the sensor slightly downward for best results.
es, the SL92B is available from Sparky Direct with fast delivery across Australia.
It’s great for lighting up driveways, patios, paths, or building exteriors. The adjustable twin heads make it easy to aim light exactly where you need it.
Yes, at 2400 lumens it gives off plenty of light for most outdoor areas making it ideal for safety, security, or general visibility around the home or workplace.
Yes, each head can swivel and tilt independently, so you can point the light up, down, or sideways to suit your space.
Definitely! It’s IP65 rated, so it’s built to resist rain, dust, and the elements all year round.
It emits a neutral 5000K white light, bright, clean, and natural, perfect for outdoor settings.
Yes, Sparky Direct stocks the SL90B and offers fast delivery right across Australia.
It automatically switches lights or appliances off after a set time from one minute up to 24 hours, helping cut down on power use and keeping things simple.
You can adjust the timer using the push button on the wall or, if connected to the PIXIE app, control it wirelessly via Bluetooth on your phone.
It’s perfect for lighting or fans that don’t need to run constantly like bathroom exhausts, hallway lights, or laundry circuits.
Yes, when connected through the PIXIE Gateway, you can set or override timers through the PIXIE app from anywhere.
You can choose any delay between 1 minute and 24 hours, handy for quick tasks or longer appliance cycles.
Yes, Sparky Direct stocks the STS600BTAM and delivers anywhere in Australia.
Yes. It provides both overload and short-circuit protection, but surge protection should be installed separately if required.
No. The unit already includes an adjustable thermal overload relay.
Yes. It’s built for indoor commercial and industrial use with protection against dust and splashes.
Yes. The overload relay lets you adjust between 18–25A to fit your motor’s requirements.
The built-in relay trips if current stays too high, cutting power before the motor overheats.
Yes. It’s rated for 11kW loads, making it well-suited for larger industrial motors.
The GW1500-XS-30 is a single-phase grid-tied inverter designed for small residential solar PV systems, converting DC power from solar panels into usable AC power for homes.
It’s rated at 1.5kW AC output, suitable for smaller solar installations and single-phase properties.
It achieves up to 97.2% conversion efficiency, ensuring minimal power loss and maximum energy yield.
Yes, it supports up to 200% DC oversizing, allowing more panels to be connected for increased energy generation.
It includes a built-in DC switch, residual current monitoring (RCM), reverse polarity protection, and optional AFCI and SPD for added safety.
Yes, Sparky Direct stocks the GoodWe GW1500-XS-30 inverter and offers fast, reliable delivery across Australia.
The TESAB28 adhesive cable tie base is used to secure and organise electrical, data, and communication cables in both residential and commercial installations.
Each tie base measures 28mm x 28mm, providing a larger surface area for improved hold and stability on flat or vertical surfaces.
The TESAB28 is supplied in a convenient 100-pack, ideal for larger installations or ongoing projects.
They feature a dual mounting system — use the pre-applied adhesive backing for quick setups or screw holes for long-term, heavy-duty mounting.
Yes, the openings are designed to fit standard cable ties up to 4.8mm in width.
Yes, Sparky Direct stocks the Tesla TESAB28 adhesive cable tie bases and delivers quickly across Australia.
They keep your cables neat and secure, helping prevent clutter and strain on wiring in any installation.
You can stick them in place using the adhesive backing or use screws for a stronger, long-term hold.
It adheres best to clean, dry, and smooth surfaces — for rough areas, screw mounting is recommended.
Once mounted with adhesive, they are generally single-use, but screw-mounted bases can be reused if removed carefully.
Yes, the white colour gives a clean, professional look that blends well with most interiors and enclosures.
Yes, Sparky Direct sells the TESAB21 tie bases and delivers quickly across Australia.
It accommodates up to 36 individual 18mm modules, arranged across two rows for a compact, high-capacity layout.
Yes, the board comes fitted with copper Earth and Neutral Bars for safe and compliant wiring.
The overall dimensions are 394mm (H) × 418mm (W) × 97mm (D), providing generous space while maintaining a slim surface profile.
It is fully compliant with AS/NZS 61439 and AS/NZS 61000 Australian standards for electrical safety and EMC performance.
Yes, the board comes with pre-printed switchboard labels to help keep wiring clearly identified.
No, it’s IP20-rated, meaning it’s designed for indoor or protected environments only.
It accommodates up to 28 individual 18mm modules across two rows, providing a high-capacity layout in a compact design.
Yes, the VBM2228SMA includes copper Earth and Neutral Bars to ensure safe and compliant electrical wiring.
The overall dimensions are 323mm (H) × 418mm (W) × 97mm (D), making it compact yet spacious enough for professional installations.
It complies with AS/NZS 61439 and AS/NZS 61000, meeting Australian electrical safety and performance standards.
Yes, circuit ID labels are included for neat, organised identification during setup or maintenance.
Installation is simple; the adjustable DIN rail and cover make levelling easy, while the push-to-open mechanism provides smooth access.
Yes, the MC4PR-10MM is available through Sparky Direct with quick delivery across Australia.
It connects 10 mm² solar cables safely and efficiently, ensuring a weatherproof, low-loss link between panels, inverters, or batteries.
It uses the advanced Stäubli MULTILAM system, providing lower contact resistance and higher current handling for large-scale solar systems.
These connectors are designed for 10 mm² (8 AWG) solar cables, ideal for high-current PV wiring.
They use standard MC4-compatible crimp tools for safe, professional terminations. Installation should be completed by a licensed solar technician.
Yes, they’re commonly used in battery energy storage systems (BESS) and hybrid solar setups rated up to 1500 V DC.
This high bay is 332mm in diameter and 34mm high.
It comes with a hook and chain, making it simple to suspend from ceilings.
The fitting is rated for 30,000 hours of operation with minimal maintenance.
The light includes 4kV surge protection to safeguard against electrical spikes.
The unit is IP65 and IK08 rated, making it dust-tight and protected against water jets, as well as durable.
It delivers 18,000 lumens from 150W, providing bright, efficient illumination for high-ceiling areas.
It accommodates up to 22 individual 18mm modules in a single-row layout, providing efficient circuit organisation.
It meets AS/NZS 61439 and AS/NZS 61000 standards, ensuring safety and compliance with Australian electrical regulations.
The board measures 466mm (H) x 210mm (W) x 97mm (D), providing ample internal space for wiring while keeping a slim surface profile.
Yes, copper Earth and Neutral Bars are pre-installed for safe, compliant circuit management.
No, the VBM1922SMA is IP20-rated and designed for indoor or protected locations.
Yes, pre-printed switchboard labels are supplied for clear identification and tidy presentation.
It accommodates up to 18 individual 18mm modules, providing a compact yet professional switchboard layout.
Yes, it comes with copper Earth and Neutral Bars for secure, compliant electrical connections.
Knockouts include 5x 20mm and 2x 25mm at both the top and bottom, plus 2x 25mm on each side for flexible cable entry options.
The VBM1518SMA measures 394mm (H) x 210mm (W) x 97mm (D), making it suitable for compact surface-mounted setups.
Yes, printed switchboard labels are included for clear and organised circuit identification.
It’s IP20-rated and complies with AS/NZS 61439 and AS/NZS 61000, meeting Australian electrical safety and performance standards.
It can hold up to 14 individual 18mm modules in a single-row configuration, providing an efficient and tidy setup.
The VBM1114SMA is IP20-rated and fully compliant with AS/NZS 61439 and AS/NZS 61000 safety and performance standards.
Yes, it comes supplied with copper Earth and Neutral Bars for safe, compliant circuit wiring.
The board features 5x 20mm and 2x 25mm knockouts at the top and bottom, plus 2x 25mm on each side, offering flexible cable entry options.
The overall size is 323mm (H) x 210mm (W) x 97mm (D), making it suitable for compact surface-mount installations.
Yes, pre-printed switchboard labels are supplied for neat and professional circuit identification.
It accommodates up to 10 individual 18mm modules in a single-row configuration, offering flexibility for compact switchboard layouts.
The VBM810SMA is rated IP20, offering protection against solid objects in indoor environments.
Yes, the board comes equipped with copper Earth and Neutral Bars for safe and compliant wiring.
It includes 4 x 20mm knockouts on both the top and bottom, plus 2 x 25mm knockouts on each side for convenient cable entry options.
The board measures 250mm (H) x 210mm (W) x 97mm (D).
It conforms to AS/NZS 61439 and AS/NZS 61000, meeting Australian safety and electrical performance requirements.
Yes, the STKJC6KWH is available from Sparky Direct with quick delivery across Australia.
It provides a neat, reliable way to connect Ethernet cables to wall plates or patch panels for fast data and voice connections.
It’s rated for Cat 6 performance, supporting Gigabit Ethernet speeds up to 1Gbps.
Yes, it can be terminated using either Krone or 110-style punchdown tools, straightforward for licensed installers.
This model supports the T568A wiring standard only, which should be consistent throughout your installation.
It fits most keystone-style faceplates and patch panels. If you’re using Clipsal or HPM wall plates, you’ll need a keystone adapter for proper fitment.
The board complies with AS/NZS 61439 and AS/NZS 61000 standards for safety and performance in Australian installations.
It features four 20mm knockouts at the top, four 20mm at the bottom, and two 25mm knockouts on each side for flexible wiring options.
The board measures 210mm (H) x 196mm (W) x 97mm (D), making it compact enough for tight wall spaces.
Yes, it comes with circuit labels for clear, organised identification.
Yes, the VBM57SMA is supplied with copper Earth and Neutral Bars for reliable and compliant wiring setups.
It accommodates up to 7 individual 18mm modules in a single-row configuration, providing compact yet flexible circuit space.
This high bay is 302mm in diameter and 34mm in height.
It has a rated lifetime of 30,000 hours for long-term, low-maintenance use.
The unit includes a suspension hook and chain for quick and secure ceiling installation.
Yes. It has integrated 4kV surge protection to safeguard against power spikes.
The fitting is IP65 rated for dust and water resistance and IK08 for impact resistance.
The EHB10NW produces 12,000 lumens from 100W, giving efficient, high-performance lighting.
It conforms to AS/NZS 61439 and AS/NZS 61000, and carries CE, RoHS, and HF test certifications.
Knockouts are provided on all sides: two 25mm and one 40x17.5mm rectangular on both the top and bottom, and two 25mm on each side.
Yes, it comes fitted with copper Earth and Neutral Bars for safe and compliant wiring.
It’s rated IP20, making it suitable for indoor use where protection from solid objects is required but water exposure is minimal.
The enclosure features a powder-coated metal tray for strength and corrosion resistance, paired with a high-quality ABS plastic cover.
It accommodates up to 4 x 18mm modules in a single-row configuration.
Yes, the STKJC6WH is available from Sparky Direct with quick shipping Australia-wide.
The gold-plated contacts ensure long-lasting connectivity and minimise corrosion.
This jack is wired to the T568A standard for consistent performance and compliance.
It supports Cat 6 performance, ideal for Gigabit Ethernet connections.
Yes, it’s made to fit directly into standard Clipsal and HPM faceplates, no extra parts or adapters are needed.
It provides a neat, reliable network connection point for Ethernet and data cables in wall outlets or patch panels.
Yes, the TuffStuff VR19 is available from Sparky Direct with fast shipping across Australia.
Absolutely. The hook and loop design lets you undo and reuse it multiple times without losing grip.
It’s great for data racks, workshops, tool storage, or anywhere you need to organise and secure cords or wiring.
It’s reusable, adjustable, and won’t damage cable jackets or insulation like plastic ties can.
The roll is 25 metres long and 19mm wide, ideal for securing medium to large cable bundles.
It’s a reusable hook and loop roll that helps you bundle and protect cables neatly, keeping installations tidy and safe.
Yes, it meets AS/NZS 61439 and AS/NZS 61000 requirements for electrical safety and performance.
The enclosure measures 273mm (H) x 380mm (W) x 115mm (D), offering a balanced size for surface installations.
The board includes two 20mm and three 32mm knockouts at both the top and bottom for flexible cable entry.
Yes, the enclosure is tested to resist ignition at 850°C for up to 30 seconds, ensuring extra protection in demanding environments.
The VBW24SA is IP66-rated for complete protection against dust and water and IK08-rated for impact resistance.
It accommodates up to 24 individual 18mm DIN modules arranged in two rows for compact circuit organisation.
Yes, you can purchase the Brilliant 22563-05 directly from Sparky Direct, with quick shipping across Australia.
Yes, the Vector III can be safely installed on raked ceilings up to 15°.
No it doesn't, it only includes a 3-speed wall control with a light switch, but a compatible remote kit can be purchased separately if preferred.
It’s perfect for enclosed alfresco or patio spaces and built to handle humid or tropical conditions.
Yes, the 65W AC motor is designed for smooth and quiet performance, making it suitable for living areas and bedrooms.
It’s ideal for larger rooms such as living areas, open-plan spaces, or enclosed patios that need strong air circulation.
Yes, it’s fully sealed to IP66, keeping out dust and strong water jets for reliable outdoor performance.
Yes, copper Earth and Neutral Bars are supplied for easy, compliant wiring.
The board measures 230 x 380 x 115mm and features four 20mm and four 32mm knockouts on both the top and bottom for versatile cable entry.
Yes, the VBW18SA is fire-resistant up to 850°C for 30 seconds, offering additional safety in demanding environments.
The board is IP66-rated for waterproof and dustproof protection and IK08-rated for impact resistance, ensuring durability in harsh conditions.
It accommodates up to 18 individual 18mm modules on a single DIN rail, making it suitable for medium-scale installations.
Yes. By producing accurate, repeatable cut-outs, it helps avoid patching or resizing later.
It can be used in conjunction with traditional methods, although it is specifically designed to match GreenDonkey saws, which makes cutting smoother and cleaner.
Yes, especially when paired with GreenDonkey’s diamond saw for tiles.
Yes. The centre viewpoint makes it easy to line up perfectly every time.
No. The cable-friendly design lets wires pass through so you can keep marking without hassle.
It replaces slow gyprock saw work with quick, clean cut-outs when used alongside GreenDonkey hole or diamond saws.
The board measures 230mm (H) x 273mm (W) x 110mm (D), compact enough for confined or external wall mounting.
Yes, both are included and made from copper for reliable, compliant wiring.
The VBW12SA complies with AS/NZS 61439 and AS/NZS 61000 for electrical and environmental safety.
Yes, the housing is tested to resist ignition at up to 850°C for 30 seconds, providing additional safety in high-temperature conditions.
The VBW12SA is IP66-rated for full dust and water protection and IK08-rated for impact resistance, making it suitable for harsh and exposed locations.
It can accommodate up to 12 individual 18mm modules on a single DIN rail, providing flexibility for small to medium installations.
Yes, it’s tested to resist ignition at 850°C for 30 seconds, adding extra safety for demanding environments.
Yes, it has an IP66 rating, UV-stable polycarbonate construction, and fire and impact resistance, making it ideal for outdoor installations.
Yes, the board includes copper Earth and Neutral Bars for compliant, tidy wiring.
The VBW8SA complies with AS/NZS 61439, AS/NZS 61000, and IEC 60529 for safety, performance, and weatherproofing.
The VBW8SA is IP66-rated for dust and water protection and IK08-rated for impact resistance, making it suitable for harsh conditions.
It can accommodate up to 9 18mm DIN modules in a single-row layout.
It’s mainly intended for indoor use but can handle short-term outdoor setups if kept dry.
No, the soft material won’t cut or mark cable surfaces, making it ideal for delicate data and comms wiring.
Yes, the nylon construction provides a secure hold while still allowing easy removal or repositioning.
Yes, it’s completely reusable, just peel it off and reapply as needed.
The VR12 is 25 metres long and 12mm wide, so you can cut off exactly what you need for each job.
It’s a reusable hook and loop roll that helps you bundle, secure, and tidy cables without damaging them.
It’s a complete set of warning and compliance labels for lithium battery systems, helping electricians and solar installers meet Australian safety standards.
Yes, it’s been examined by the Clean Energy Council and aligns with AS/NZS 5139 and AS/NZS 4777.1:2024—making installations inspection-ready.
It includes all required safety and hazard labels for lithium battery installations—covering risk warnings, shutdown instructions, and access restrictions.
Yes, it’s specifically designed for lithium-ion systems to meet AS/NZS 5139 signage requirements.
They ensure safety, meet inspection standards, and provide clear hazard warnings for anyone accessing the system.
Yes, Sparky Direct sells the IES KLIBDC02 and offers fast, Australia-wide delivery for solar professionals.
Yes, it is IP65 rated, ensuring resistance to dust and water exposure.
Yes. It has a PIR motion sensor with a 6m detection range for efficient light activation.
A 2.8W Grade-A monocrystalline solar panel for efficient charging.
The 3.7V, 3000mAh lithium battery can provide up to 4 nights in Auto mode or 2 nights in Continuous mode.
It has Auto Sensor Mode, which activates on motion, and Continuous Mode for steady lighting.
It produces 900 lumens from a 5W LED, giving strong illumination for outdoor areas.
It’s perfect for linking network equipment over longer distances while keeping your cabling tidy and easy to manage.
It’s 5 metres long, giving you plenty of reach for racks, patch panels, or switches positioned across a room.
Yes, it’s built for 1Gbps network performance with consistent signal reliability.
The 28AWG design takes up less space, improves airflow in server racks, and makes installations neater.
Yes, it’s fully compatible with all standard Cat6 and Cat5e RJ45 ports.
Yes, Sparky Direct sells the STKPLC6UT5BL and delivers quickly throughout Australia.
The VBW4SA is a 4-pole IP66-rated surface-mount distribution board designed for compact, reliable electrical distribution in outdoor, industrial, and marine applications.
It’s built from high-quality, fire-resistant polycarbonate plastic tested to withstand up to 850°C for 30 seconds.
It complies with AS/NZS 61439 and AS/NZS 61000 for electrical safety and weatherproof performance.
Yes, the VBW4SA comes with a copper Earth & Neutral Bar for safe and compliant wiring.
The VBW4SA is rated IP66 for dust and water protection and IK08 for impact resistance.
It can accommodate up to 4 18mm-wide modules in a single-row configuration.
Yes, it’s perfect for both offering a neat, compliant solution for modern residential and commercial projects.
Yes, both are included with labelled terminals to make wiring and circuit identification easier.
Yes, it conforms to AS/NZS 61439 and AS/NZS 61000 for low-voltage switchgear assemblies.
It has an IP20 rating, suitable for indoor installations protected from dust and moisture.
Knockouts include top and bottom (3×20mm, 2×25mm, 4×32mm) and sides (2×25mm each side) for flexible cable entry options.
It accommodates up to 36 individual 18mm modules arranged in a two-row configuration.
It’s great for connecting network devices over short-to-medium distances while keeping your cabling tidy and easy to manage.
It’s 2 metres long, ideal for linking devices or switches without creating excess cable slack.
Yes, it provides full Gigabit Ethernet performance for reliable, high-speed data transmission.
It’s up to 50% thinner, making it easier to route and manage while improving airflow in network cabinets.
Yes, the ultra-thin cable design and flexible jacket make it perfect for compact racks or wall-mounted switches.
Yes, Sparky Direct sells the STKPLC6UT2BL and delivers quickly across Australia.
The VBM2228FLA is a 24-pole flush-mount distribution board designed for safe, reliable circuit distribution in residential and commercial installations.
It combines durability, compliance, and a clean design with easy installation—making it a professional-grade solution for modern electrical systems.
Yes, it’s ideal for new installations or replacing older plastic boards in renovations or retrofits.
It holds up to 28 x 18mm modules arranged in two neat rows, making it perfect for multi-circuit setups.
The VBM2228FLA includes Earth and Neutral Bars with printed circuit ID labels for neat, compliant wiring layouts.
Knockouts include top and bottom (3×20mm, 2×25mm, 2×32mm), right side (2×25mm), and left side (2×25mm) for flexible cable entry options.
They’re perfect for everyday cutting on site or at home. Built to cut materials like rope, cable ties, leather, and packaging with ease.
Yes, the soft-grip handles are designed for comfort and control, even during extended cutting work.
Yes, the ambidextrous handle design makes them suitable for any user.
The serrated blades grip materials better, preventing slips when cutting things like rope or plastic.
Yes, they include a protective sheath that keeps the blades safe and makes storage or transport easy.
Yes, Sparky Direct sells these multi-purpose scissors and delivers across Australia.
It’s made to hold and protect your snips or knives, keeping them right at your side for easy access while working.
It’s designed for Sterling Black Panther Snips and Autoloading Knives but also suits similar-sized hand tools.
The holster slides easily onto belts or clips onto bags and work gear for convenient, secure carrying.
Definitely. The heavy-duty nylon is tough, abrasion-resistant, and built to last through regular trade work.
It lets you attach a safety cord or tether to prevent losing your tools when working at heights or busy sites.
Yes, you can purchase it directly from Sparky Direct with fast delivery across Australia.
Yes, it’s ideal for new installations or replacing older boards in existing walls.
The adjustable DIN rail and cover make levelling simple, helping electricians achieve a neat, professional result.
The board can fit up to 22 standard 18mm breakers or modules in a single row.
The VBM1922FLA has an IP20 rating, making it suitable for indoor use in dry, protected environments.
Yes, it’s fully compliant with AS/NZS 61439 and AS/NZS 61000 standards for low-voltage switchgear and assemblies.
Yes, the board includes both Earth and Neutral Bars with clear circuit identification labels for tidy, compliant wiring.
A 2.8W Grade-A monocrystalline solar panel for efficient charging.
It has Auto Sensor Mode, which activates on motion, and Continuous Mode for steady lighting.
The 3.7V, 3000mAh lithium battery can provide up to 4 nights in Auto mode or 2 nights in Continuous mode.
It produces 900 lumens from a 5W LED, giving strong illumination for outdoor areas.
Yes. It has a PIR motion sensor with a 6m detection range for efficient light activation.
Yes, it is IP65 rated, ensuring resistance to dust and water exposure.
It carries an IP20 rating, suitable for indoor installations protected from direct moisture and dust.
It offers solid construction, modern design, easy access, and full compliance, a dependable choice for long-term use in flush-mounted applications.
Yes, it meets AS/NZS 61439 and AS/NZS 61000 standards for electrical assemblies and switchboard safety.
It’s designed with an adjustable DIN rail and cover to help achieve a level, secure fit in flush-mounted walls.
Yes, both are included with clearly labelled terminals for neat and compliant circuit organisation.
It accommodates up to eighteen 18mm-wide modules in a single-row layout, providing flexibility for various circuit setups.
They’re compact, strong, and cut cleanly through electrical wire, insulation, and other materials without slipping.
At 185mm long, they fit comfortably in hand and in most tool belts or pouches.
Yes, the high-tensile stainless steel blades stay sharp even after repeated use on hard materials.
Yes, they’re built specifically for demanding cutting tasks in trade and electrical work.
They combine sharp, serrated stainless blades, a comfortable grip, and durable construction. This makes them a reliable choice for professionals who need precise, lasting performance.
Yes, Sparky Direct sells the 29-702 snips and ships quickly across Australia.
Definitely. The flush mount design fits neatly into wall cavities, making it ideal for replacing older enclosures.
Yes, it’s perfect for both residential switchboards and small business installations where presentation and safety matter.
It can hold up to fourteen 18mm modules, making it suitable for larger homes or small commercial setups.
Yes, pre-formed knockouts are provided on the sides, top, and bottom for flexible wiring access.
It meets AS/NZS 61439 and AS/NZS 61000 standards, ensuring compliance with Australian electrical requirements.
Yes, both Earth and Neutral Bars are included, along with clear labelling for neat and compliant circuit organisation.
It’s ideal for mid-length network runs between switches, patch panels, or devices where tidy cable management matters.
It’s 1.5 metres long, perfect for linking nearby equipment without creating extra cable mess.
Yes, it supports full Gigabit Ethernet speeds while maintaining consistent, interference-free signal quality.
The slim profile helps keep network racks neat, improves airflow, and makes installation easier in tight spaces.
It provides enough reach for most short-to-medium patch connections without leaving excess slack or clutter.
Yes, Sparky Direct sells the STKPLC6UT15BL and offers fast, reliable delivery Australia-wide.
It accommodates up to ten 18mm-wide modules in a single-row configuration.
Yes, both are adjustable, allowing level and secure installation in flush-mount applications.
The board features a compact single-row design suitable for tight wall spaces and modern installations. With the dimensions H210 x W250 x L97mm
Yes, it’s fully compliant with AS/NZS 61439 and AS/NZS 61000 standards, ensuring it meets Australian electrical safety requirements.
Yes, both bars are included along with circuit ID labels for clear, organised wiring.
It holds up to ten 18mm-wide breakers or modules in one row.
It’s ideal for short patch connections between switches, panels, or devices in areas where space is tight and airflow is important.
It’s a 1-metre cable, great for tidy setups that don’t need excess cable length.
Yes, it fully supports Gigabit Ethernet (1 Gbps) for smooth, high-speed data transfer.
Absolutely. Its slim 28AWG copper wires make it flexible and easy to route even in confined spaces.
The thinner cable helps keep installations neater, reduces clutter, and allows better airflow in data cabinets.
Yes, it’s available through Sparky Direct with quick delivery Australia-wide.
Yes, Sparky Direct offers fast delivery options across Australia, making it suitable for electricians who need it on site without delays.
Absolutely. It’s built to be durable and reusable, handling daily site conditions.
Yes. The built-in alignment guides keep everything neat and straight.
No. Once positioned, the template gives you all the markings you need in one go.
Yes. The template includes options for both tighter and wider spacing.
Yes. It supports both vertical and horizontal layouts, making it flexible for different setups.
It speeds up multi-outlet and switch cut-outs by giving you exact markings and spacing - no more freehand guesswork.
It’s perfect for short network connections between patch panels, switches, or devices in tight spaces.
It’s 0.5 metres long, ideal for clean, clutter-free setups where extra cable length isn’t needed.
It uses 28AWG copper conductors, making it about half the thickness of a standard Cat6 patch lead.
The slimmer profile helps improve airflow in network racks and keeps cabling tidy and easier to manage.
Yes, it delivers full Gigabit Ethernet (1Gbps) speeds with stable, high-quality data transmission.
Yes, Sparky Direct stocks this cable and delivers across Australia with fast, reliable service.
Yes, it complies with AS/NZS 61439 and AS/NZS 61000 for low-voltage switchgear and assemblies.
Yes, it includes multiple knockouts on the top, bottom, and sides for flexible wiring entry options.
The overall size is 210 x 196 x 97mm, with a wall cutout of 192 x 167 x 77mm for flush mounting.
Yes, its flush mount design and compact dimensions make it perfect for retrofits or tight wall cavities.
The board comes with Earth and Neutral Bars, as well as clear labels for identifying circuits.
It holds up to seven 18mm modules, making it suitable for small homes, units, or light commercial setups.
Yes, it meets AS/NZS 61439 and AS/NZS 61000 standards, ensuring safety and reliability for licensed installations.
Yes, it’s ideal for replacing older or plastic enclosures in upgrades and renovation projects.
It includes an adjustable cover and pre-fitted DIN rail, helping ensure a level and efficient installation.
No, the durable powder-coated iron construction acts as both enclosure and protective plate.
Yes, it’s perfect for small residential setups or light commercial spaces where only a few circuits are required.
It fits up to four standard 18mm circuit breakers in one row, making it ideal for compact jobs.
It’s perfect for short patch runs between switches, routers, or panels where space is tight and airflow matters.
It’s 0.3 metres long, ideal for neat, minimal cable routing in network racks or wall-mounted panels.
The 28AWG design makes it about half the thickness of standard Cat6 leads, which improves cooling and reduces clutter.
Yes, it supports full Gigabit Ethernet speeds and maintains solid Cat6 signal quality.
Yes, the thin, stranded copper construction makes it very easy to bend and route through compact spaces.
Yes, Sparky Direct sells the STKPLC6UT03BL and ships Australia-wide with fast, reliable delivery.
It’s great for junction boxes, switchboards, and control panels where space is tight and neat connections are important.
It saves time, eliminates loose screws, and provides a consistent, maintenance-free connection every time.
Yes, it’s rated 450V and 32A, making it suitable for licensed electricians in residential, commercial, and light industrial projects.
Yes, they can be safely reused during maintenance or when updating wiring layouts.
No tools are required. Just strip the wire, insert it into the port, and the spring clamp locks it securely in place.
It joins four wires together, allowing you to split or branch power neatly between multiple points without using screws.
It saves time, avoids loose screws, and provides consistent pressure on every wire for a reliable electrical connection.
Yes, it’s rated 450V / 32A with strong insulation resistance, making it suitable for licensed electricians in any setting.
It’s ideal for junction boxes, switchboards, lighting loops, and control panels where multiple connections are needed.
Yes, they can be safely reused during maintenance or when changing connections.
No tools are needed. Simply strip the wire, insert it into the terminal, and the internal spring clamp secures it in place.
It connects three input wires and splits them into nine outputs, making it easy to branch power across multiple circuits.
It helps you quickly and cleanly punch network cables into patch panels or jacks - seating and trimming the wires in one motion.
It’s shaped to match Krone IDC terminals, so it pushes each wire firmly into place while cutting off the excess neatly.
Yes, it’s perfect for Cat5e and Cat6 structured cabling, ensuring secure, professional-quality connections.
Yes, it includes an integrated cutter that trims the wire cleanly during the punchdown process — no extra step needed.
Yes, it works with Krone-style patch panels, keystone jacks, and wall-mounted network outlets.
Yes, Sparky Direct stocks the STKPDTKR punchdown tool and delivers Australia-wide with fast, reliable service.
Warranty details may vary; typically, these units include a manufacturer’s warranty. Check Sparky Direct for the exact coverage.
Yes, Sparky Direct ships Australia-wide, including metro and regional areas.
At around 2,000 lumens, it’s comparable to a standard 150W halogen but with the benefit of solar power and lower running costs.
Yes, a remote is included with timer settings for customised operation.
The 3.2V, 15Ah LiFePO4 battery provides over 12 hours of runtime when fully charged.
It comes with a 15W, 5V monocrystalline solar panel for high charging efficiency.
The PIR sensor detects movement up to 8m away, automatically turning the light on when someone approaches.
Yes, its UV-resistant ABS housing and IP54 rating make it suitable for year-round outdoor use.
It’s energy-efficient, low-maintenance, easy to install, and ideal for places without access to mains electricity.
It charges in roughly 4–6 hours of good daylight and provides up to 14 hours of lighting.
No, it’s fully solar-powered with an integrated panel and battery. Just mount it and let it charge in sunlight.
It produces approximately 1,400 lumens, which is bright enough for general outdoor lighting in homes, businesses, or public spaces.
The PIR sensor detects movement within 8 metres and switches the light on automatically, ideal for energy-saving setups.
It’s cost-effective, energy-efficient, easy to install, and provides reliable lighting where mains power isn’t available.
It typically reaches full charge in 4–6 hours of direct sunlight.
No, it’s completely solar-powered with a built-in panel and battery, so no external wiring or power source is needed.
It’s a 12W solar-powered street light designed for outdoor lighting on paths, driveways, and parking areas.
It outputs around 1,800 lumens, bright enough to clearly light small to medium outdoor spaces.
It’s a 20-metre Cat 6 Ethernet cable designed for long network run, ideal for connecting devices between rooms, racks, or floors.
When you need to span large distances, like linking network cabinets or connecting devices across office spaces or multi-room setups.
Yes, it fully supports Gigabit Ethernet (1000BASE-T) and maintains consistent data transfer over long runs.
Yes, it helps you identify and manage cables easily in crowded racks or patch panels.
No, as long as it’s installed correctly, the PLC620BL maintains strong signal performance up to the full 100m Cat 6 limit.
Yes, Sparky Direct stocks the STKPLC620BL and delivers Australia-wide with fast, reliable shipping.
Yes, its UV-resistant ABS housing and IP54 rating make it suitable for year-round outdoor conditions.
Yes, the PIR sensor detects movement up to 8 meters away and turns the light on automatically, making it ideal for driveways and walkways.
Yes, a full charge typically provides 12–14 hours of light, depending on the mode and usage.
On average, it takes 4–6 hours of good sunlight to reach a full charge.
No, it’s completely solar-powered with a built-in panel and battery, so there’s no external wiring required.
It produces around 2,250 lumens of cool white light, bright enough to illuminate medium-sized outdoor areas.
It lets you join or distribute multiple conductors in one compact block, making it great for efficient and organised wiring.
Yes, the PCT-215B is rated 450V / 32A and designed for licensed electricians to use across residential, commercial, and industrial projects.
Yes, they can be reused safely for reconfiguration, making them a practical option for maintenance jobs.
Yes, the screwless spring clamp saves time, just strip the wire and push it in, no screwdriver needed.
Each jar includes 50 connectors, enough for ongoing installations or maintenance work.
It joins up to five wires securely without screws or tools, letting electricians make quick, neat, and reliable splices.
They save time, give consistent pressure on every joint, and remove the risk of loose screws.
Yes, they’re rated 450V / 32A and designed for licensed electricians to use across all types of installations.
Yes, they can be released and reused during maintenance or when adjusting wiring layouts.
Yes, the screwless clamp lets you make a solid connection in seconds, just strip the wire and push it in.
Each jar contains 25 connectors, making it easy to keep stocked for ongoing jobs.
It connects up to four wires securely without screws or tools, making wire joins quick, tidy, and safe.
Yes, Sparky Direct stocks the Gyp55 and offers delivery across Australia.
A lot! It’s much faster to drill two holes and link them than to mark and cut the whole shape with a gyprock saw.
Any standard power drill with the right arbor will drive it. No special drill required.
The extended side slots clear waste as you drill, so the cut stays neat without clogging.
For a standard outlet, you drill two 55 mm holes side by side, then swing the holesaw gently to join them into a single cut-out.
It drills precise 55 mm holes in gyprock that line up with GreenDonkey templates, giving you the right size and shape for power point or switch cut-outs.
It’s a 15m Cat 6 Ethernet cable used to connect network devices over longer distances - ideal for linking racks, rooms, or large work areas.
Choose this length when you need to span wider spaces, route along walls or ceilings, or connect distant panels in larger sites.
Definitely. It supports Gigabit Ethernet (1000BASE-T) and exceeds Cat 6 standards for consistent high-speed data transfer.
The stranded copper conductors and flexible PVC jacket are built to handle repeated movement and long-term installation.
Yes, the colour helps with quick cable identification and tidy organisation in racks or patch panels.
Yes, Sparky Direct stocks the STKPLC6150BL Cat 6 patch lead and delivers Australia-wide with fast, reliable shipping.
It is designed for 2.5mm² stranded conductors, commonly used in general-purpose wiring and power circuits.
Yes, it’s rated at 450V / 32A, so it’s suitable for licensed electricians in all settings.
Yes, they can be released and reused when adjusting, upgrading, or maintaining wiring.
The screwless clamping system means you simply strip the wire and push it in, eliminating the need for a screwdriver.
Each jar contains 40 connectors handy for electricians and contractors who use them frequently on-site.
It quickly joins two 2.5mm² wires together without screws or tools, giving a neat and secure connection in seconds.
It’s a 10m Cat 6 Ethernet cable designed to connect network devices that are far apart, like between racks, rooms, or work areas.
It’s ideal for setups where shorter cables won’t reach—such as connecting equipment across larger rooms or linking network racks.
Yes, it fully supports Gigabit Ethernet (1000BASE-T) and provides strong, stable signal performance.
Yes, the blue jacket makes cables easy to trace and identify in racks or under desks, especially in multi-cable setups.
Yes, the gold-plated RJ45 connectors resist corrosion and ensure consistent performance, even with repeated use.
Yes, Sparky Direct sells the STKPLC610BL and delivers Australia-wide.
Yes, the screwless clamping system saves significant time, just strip the wire to 11–12mm and insert it.
Yes, the screwless design allows for reusability, making it suitable for maintenance and temporary setups.
It’s used for inline and interjoining wiring connections in residential, commercial, and industrial electrical systems.
It uses a screwless clamping mechanism, allowing fast and secure conductor insertion without tools.
It is rated for 32A at 450V, with a voltage resistance of up to 4kV.
The PCT-223B is a 3-pole interjoining connector block designed for quick, tool-free electrical connections in 2.5mm² wiring.
It’s a 5 m Cat 6 Ethernet cable designed for connecting devices that are further apart, such as between racks, desks, or rooms.
Choose 5 m when you need extra length for tidy routing around furniture, across a room, or between network racks.
It helps you identify and organise cables quickly, especially in network racks or shared workspaces.
Yes, the gold-plated RJ45 connectors resist corrosion and maintain clean, stable contact over time.
The flexible PVC sheath makes it easy to bend around corners or through cable guides without damage.
Yes, Sparky Direct stocks the STKPLC65BL and delivers across Australia.
It’s a 3 m Cat 6 Ethernet cable used to connect devices like switches, routers, or computers in offices, homes, and server racks.
It’s perfect when you need a little extra reach between devices without creating cable mess or tangles.
Yes, it’s designed for Gigabit Ethernet, giving you stable and high-speed performance.
It helps with quick identification and cable management in racks or under desks, especially useful in mixed setups.
Yes, the flexible CM-rated sheath allows smooth bends and tidy cable dressing in network cabinets.
Yes, Sparky Direct stocks the STKPLC63BL and delivers it across Australia.
The Dia55 keeps the holes neat and consistent, reducing mistakes and saving time on rework.
Yes, it’s designed for quick, accurate openings in tiled walls so outlets line up properly without messy breaks.
It’s built for both ceramic and porcelain, giving clean cuts in tougher tiles where standard saws struggle.
You drill two half-holes using the Dia55, then finish the opening by joining them with an angle grinder and diamond cutting disk.
Yes, Sparky Direct stocks the Dia55 and ships Australia-wide.
It’s made with a diamond edge, so it can cut cleanly through ceramic and porcelain tiles without cracking them.
They save time, reduce installation errors, and provide consistent, reliable connections without the hassle of screws.
Yes, they are ICE Standard Approved, rated to 450V and 32A, making them safe for licensed electricians to use in homes or commercial jobs.
Yes, they are designed to be reusable, which helps reduce waste and cost over time.
Yes, the screwless clamp saves time, just strip the wire and push it in.
You get 20 blocks per jar, making it convenient for site work or larger jobs.
It lets you quickly and securely join up to five 2.5mm² wires together without needing screws or tools.
It’s a 2m Cat 6 patch lead, ideal for connecting devices a little further apart while keeping your cabling tidy.
Use it when devices aren’t right next to each other — for example, from a patch panel to a switch on a nearby rack level.
Yes, it’s Cat 6 rated, so it easily handles Gigabit Ethernet and high-speed data transfers.
The stranded copper build and PVC jacket make it flexible for rack use and durable for regular handling.
It gives flexibility to reach between devices without creating excess slack, which helps keep networks tidy.
Yes, Sparky Direct sells the STKPLC62BL and delivers Australia-wide.
It’s a 1.5m Cat 6 patch lead, ideal for connecting nearby devices in a rack or office while keeping things tidy.
It gives you extra flexibility compared to a 1m lead, but without the clutter or slack of a 2m cable.
Yes, Sparky Direct sells the STKPLC615BL and delivers Australia-wide.
The stranded copper build and PVC jacket make it flexible, durable, and resistant to damage from regular handling.
The gold-plated RJ45 connectors are designed to last, resisting corrosion and keeping connections stable.
Yes, it’s Cat 6 rated and supports high-speed Gigabit Ethernet reliably.
It’s a 1m Cat 6 patch lead, ideal for connecting nearby devices in a rack or office without leaving messy excess cable.
It helps keep your setup neat, improves airflow in racks, and reduces cable tangles in workstations.
Yes, it’s Cat 6 rated, so it reliably handles Gigabit Ethernet and high-speed data transfers.
The stranded copper build and PVC jacket make it flexible and durable, even with frequent plugging and unplugging.
Yes, it makes cables easier to identify and trace in racks or offices with multiple patch leads.
Can I buy the PLC61BL from Sparky Direct?
The JVC7200S25TW functions as a central distribution point, safely managing and isolating power across multiple circuits. With a built-in isolator and a 72-pole chassis, it provides electricians with a secure and organised solution for large-scale installations.
Yes, the 72-pole chassis and 250A capacity mean it can handle high-demand projects like office blocks, warehouses, and industrial sites.
Yes, it includes a lockable door system with a key, so only authorised staff can access the breakers and isolator.
This is a surface-mount distribution board, so it can be fixed directly to walls in switchrooms, plant rooms, or service areas.
The JVC7200S25TW offers high capacity, compliance with Australian standards, built-in security, and Hager’s reputation for reliability. All important for large jobs where downtime or non-compliance isn’t an option.
Yes, Sparky Direct stocks the JVC7200S25TW and delivers it Australia-wide. As a bulky item, additional freight charges may apply.
Sparky Direct can help with warranty claims and replacements. The downlight is backed by a 3-year Clipsal warranty, ensuring you’re covered under Australian Consumer Law.
The LED is designed to last up to 50,000 hours, which translates to many years of normal household use. It’s non-replaceable, but built for long-term performance.
At only 7W, this light delivers the same brightness as a much higher wattage halogen. That means strong lighting with much lower energy bills.
Yes, the IP44 front protection makes it suitable for covered outdoor areas like eaves. It’s not designed for direct exposure to heavy rain, but works perfectly in sheltered spots.
No, it is IC-4 rated, which means it’s safe to be installed against and even covered by insulation. It’s built for Australian conditions and won’t overheat in your ceiling.
Yes, there’s a built-in switch that lets you choose warm white (3000K), cool white (4000K), or daylight (6000K). This means you can adjust the light to suit different rooms or moods.
No, this ripple-resistant version is designed to minimise flicker. It gives you smooth, stable dimming even if your power supply uses ripple signals.
Yes, the front of the fitting is rated IP44, making it suitable for bathrooms and other damp zones. Just make sure installation follows local wiring rules for wet areas.
Yes, you can order this model directly online and have it delivered fast, anywhere in Australia. Sparky Direct also supports warranty claims, so you’re covered if anything goes wrong.
It comes with a 3-year Clipsal warranty, which covers repair or replacement.
This warranty is fully supported under Australian Consumer Law for peace of mind.
Yes, it works with Clipsal LED rotary dimmers and Wiser Bluetooth dimmers. You’ll get smooth dimming down to low levels without flicker.
The LED has a rated life of up to 50,000 hours (L70). This means years of reliable use before any noticeable drop in brightness.
From the front, the fitting has IP44 protection, making it safe for damp areas. From the rear, it is IP20. It also carries an IK02 impact rating, giving it resilience against light knocks.
Yes, it includes advanced filtering to reduce flicker caused by ripple control signals.
This ensures a smooth, stable light even in areas where supply authorities use ripple control.
The required cut-out is 90 mm. The trim width is 110 mm and the height is 55–58 mm, with a mounting depth of 55 mm.
These standard dimensions make installation straightforward.
It has a 110° wide beam angle, making it ideal for general room lighting.
This spread gives you even light coverage without dark patches.
The downlight delivers 750 lumens of brightness across all three selectable colour temperatures (3000K, 4000K, and 6000K).
This ensures consistent lighting, whether you prefer warm, neutral, or cool light.
It is rated at 7W and runs on 220–240V AC, 50 Hz. This makes it highly energy-efficient while still providing strong, reliable lighting.
Yes, the TPDL1C3R fully complies with AS/NZS 60598.2.2 and is IC-4 rated. This means it can safely sit against timber, walls, and insulation without any risk of overheating.
You can install it confidently knowing it meets strict safety standards.
Yes, it comes with a remote for timer settings and flexible light operation.
On a full charge, the 3.2V, 30Ah LiFePO4 battery runs the light for more than 12 hours.
The SFQ-300C produces 4,100 lumens at 6000K cool white, delivering clear and bright outdoor illumination.
A 30W, 5V monocrystalline solar panel is supplied for fast and efficient charging.
No, since it’s fully solar-powered and doesn’t connect to mains, you can install it without electrical licensing.
Yes, with its IP65 rating, die-cast aluminium housing, and PC lens, it is dustproof, water-resistant, and built for harsh weather.
Use it when devices are close together, like in a rack or between a switch and patch panel, to avoid unnecessary cable slack.
es, the colour makes it easy to identify and manage cables when you’re dealing with multiple connections.
Yes, it’s Cat 6 rated and supports Gigabit Ethernet with reliable performance.
Yes, Sparky Direct sells the STKPLC605BL and ships across Australia.
It helps reduce clutter, improve airflow in racks, and keep your setup neat and easy to work with.
It’s a short 0.5m Cat 6 patch lead, perfect for connecting devices in racks or nearby equipment without messy excess cable.
Yes, by consolidating 24 ports into one panel, it keeps racks neater and makes troubleshooting easier.
You’ll need a Krone or 110 punch-down tool for quick, secure cable terminations.
The IDC connectors are colour-coded for both T568A and T568B wiring, so you can use whichever scheme your system requires.
Yes, Sparky Direct stocks the PPC624 and supplies it for both commercial and residential installs.
Yes, it’s Cat6 rated, so it’s reliable for high-speed data like Gigabit Ethernet.
It organises and connects up to 24 network cables in one rack-mounted panel, making data and voice systems easier to manage.