Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Trader Meerkat MENGR | Neon Indicator Mechanism 250V | Green video.

        Trader | Meerkat Neon Indicator Mechanism 250V | Neon Green

        The Trader MENGR is a neon indicator mechanism rated 250V AC, supplied in a green lens as part of the Meerkat mechanism range. The MENGR mounts into Clipsal, Trader, NLS and 4C switch plates, so it drops into standard grid positions alongside switch mechs. Identification for 250V is marked on the lens itself. Trader covers the mechanism with a 10 year warranty.

        Plant rooms, pump circuits and hardwired appliance runs give no visual sign that a circuit is energised once the plate is fitted. Diagnosis then starts at the switchboard rather than at the point of control. The MENGR draws approximately 250-275mW at 250V, so the load added to a lighting or appliance subcircuit is negligible. Neutral and active terminate to either terminal, which removes a polarity check from an install already tight on time.

        Indication mechanisms turn a plain switch plate into a status display without a second point, a separate pilot fitting, or extra switchboard hardware. The MENGR shares the grid footprint used across the Meerkat mechanism range, so it occupies a spare aperture on an existing plate rather than requiring a fresh cut-out. Terminal bores of 4.1mm accommodate 4 x 1.5mm2 or 3 x 2.5mm2 conductors, which covers loop-in wiring at the switch without duplicating terminations in a connector. Stocking green, amber and red mechanisms in one housing consolidates a single mechanism profile across every indication job.

        Features

        • 250V AC neon indicator — the MENGR gives a visible live indication at the plate, with the 250V identification printed on the lens itself.
        • Green lens — green is the conventional colour for a supply-available or normal-status indication on a switch plate.
        • Low power draw — the neon draws approximately 250-275mW at 250V, so it adds negligible load to the circuit it monitors.
        • Non-polarised terminals — neutral and active can be connected to either terminal, so the mech lands either way round.
        • 4.1mm terminal bores — accommodate 4 x 1.5mm2 or 3 x 2.5mm2 cables, taking loop-in conductors at the switch position.
        • Plate compatibility — the MENGR fits Clipsal, Trader, NLS and 4C plates, so it works with the plate ranges already specified on most domestic jobs.
        • Meerkat range mechanism — shares the grid housing used across the Meerkat mech range, keeping one shape and one aperture across a board of mechs.
        • Marked lens identification — the printed 250V marking on the lens lets an electrician confirm the voltage rating without pulling the plate off.
        • 10 year warranty — Trader warrants the MENGR for 10 years from the invoice date, with return to Sparky Direct as the claim method.
        • Inductive load glow — inductive loads occasionally cause neons to glow in the OFF position; a 47kohm, 0.5W 240V resistor across the terminals overcomes this.
        • Mechanism only — the MENGR is supplied as a mech with no plate, so a compatible plate is ordered separately.
        • 250V AC rating only — the MENGR is not a d.c. device and is not intended for 24V d.c. signalling circuits.

        Where to use

        • Hot water and pump circuits — the MENGR sits beside the isolating switch and shows at a glance whether the circuit is energised before anyone opens the board.
        • Plant and pool equipment — a green indication at the switch plate confirms supply to filtration or pool pump circuits from outside the equipment enclosure.
        • Sheds and workshops — a neon in the plate flags live sub-circuits where the switchboard sits well away from the work area.
        • Kitchen and laundry appliance points — the MENGR indicates supply to a hardwired oven, cooktop or dishwasher circuit controlled from a wall switch.
        • Commercial fit-outs — indication mechs are specced into grid plates alongside switch mechs for cleaners, staff and contractors reading a plate rather than a board.
        • Retrofits into existing plates — a spare aperture on a Clipsal, Trader, NLS or 4C plate takes the MENGR without a new cut-out or a fresh wall box.
        • Rental and property maintenance — a visible indication at the plate cuts down the diagnostic time on a callout where a tenant reports a dead appliance.

        The MENGR is rated 250V AC only and is not suitable for 24V d.c. signalling circuits. It is a mechanism, not a complete plate assembly, so it is not a standalone fitting. The published data carries no IP rating for the MENGR, so it is not specified for weatherproof or damp exposed positions. Installation is work for a licensed electrician.

        (MENGR)

        The MENGR is rated 250V AC, with the 250V identification printed on the lens for confirmation on site. The neon draws approximately 250-275mW at 250V. A 24V d.c. version of the Meerkat neon mech is available separately in the same housing for low-voltage signalling work.

        Neutral and active can be connected to either terminal on the MENGR, so the mech is not polarity dependent. Terminal bores measure 4.1mm and accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Installation must be carried out by a licensed electrician.

        The MENGR fits Clipsal, Trader, NLS and 4C plates. It is supplied as a mechanism only, so a compatible plate is ordered separately. Trader Meerkat grid plates and standard 30 series style plates from those ranges take the mech in a single aperture.

        Inductive loads occasionally cause neons to glow in the OFF position. Placing a 47kohm, 0.5W 240V resistor across the terminals overcomes this. The effect is a characteristic of neon indicators on inductive circuits rather than a fault in the mechanism.

        The Meerkat neon indicator mechanisms come in green, orange (amber) and red. The MENGR is the green version. All three share the same housing and terminal arrangement, so the wiring and plate fitment are identical across the colours.

        Trader warrants the MENGR for 10 years from the invoice date. The warranty method is return to Sparky Direct. Warranties are void if the product is not installed by a licensed electrician.

        The published data for the Meerkat neon indicator mechanism carries no IP rating, so it is not specified for weatherproof or damp exposed positions. Fit it in dry indoor locations behind a compatible plate. Confirm suitability with the installing electrician before purchase.

        The Trader MENGR is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Warranty Period: 10 Year Trader Warranty
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Trader
        SKU MENGR
        Package Weight 0.010kg
        TYPE VALUE
        Type Mechanism
        Brand Trader
        Colour Neon Green
        Voltage (V) 250
        Terminal Bores 4.1mm ø
        Accommodates 4 x 1.5mm² or 3 x 2.5mm² Cables

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products