Clipsal by Schneider Electric | Meter Box Switchboard 21 Module | Beige Galvanised Steel
The Clipsal 230DRAQTPL is a Queensland Type 21 module switchboard and meter box rated for temporary supply applications, designed to comply with AS/NZS 3012. The 230DRAQTPL measures 680H x 470W x 280D mm and is constructed from galvanised steel with an epoxy powder coat finish for durability. It includes a removable meter panel, earth and neutral bar assembly, DIN rail, meter isolation link, and weather rib for Queensland installations.
Contractors and electricians routinely specify Clipsal meter boxes for new builds, temporary supply requirements, and routine replacements in Queensland. The 230DRAQTPL meets Queensland compliance standards and provides generous wiring room behind the switchboard escutcheon for straightforward termination work. The removable meter panel and DIN rail configuration allow sparks to land circuits quickly without crowding the board. The 230DRAQTPL reduces install time on typical domestic and small commercial jobs.
The 230DRAQTPL sits between cost and durability as an option when QLD-compliant hardware is non-negotiable. Meter boxes occupy a fixed inventory slot on most sparky trucks; the transparent pricing at Sparky Direct makes it straightforward to cost the 230DRAQTPL into a quote upfront and move forward without negotiating on supply-chain timing. Stock rotation is predictable: one model, one position, fast reorder.
Features
- 21 module capacity — accommodates MCBs, RCBOs, RCDs, and monitoring devices on a single DIN rail, covering most domestic and small commercial service sizes.
- Queensland Type 21 module specification — complies with AS/NZS 3000 and AS/NZS 3012 for temporary supply applications in Queensland without additional certification steps.
- Removable meter panel — internal panel separates metering from switchboard, allowing meter installation and testing independently of the main board circuit work.
- Earth and neutral bar assembly — pre-mounted assembly with earth stud and crimp lug supplied, eliminating site fabrication and tightening during termination.
- DIN rail mounting — standard 35mm DIN rail fitted; all standard MCBs, RCBOs, and auxiliaries snap on without rebasing or rewiring.
- Meter isolation link fitted — complies with temporary supply isolation requirements under AS/NZS 3012; no additional isolator modules needed.
- Semi-flush wall mounting — designed for shallow cavity or surface installation; no recessed cavity required on most residential walls.
- Ventilated removable door with retainer — door opens fully and stays captive on its hinge pin; field repairs do not trap the door in place.
- Padlockable front panel — standard padlock provision; suited for multi-tenant or temporary site work where circuit isolation is required between trades.
- Cable entry: knock-outs top, bottom, rear — flexible cable ingress from any direction; unused ports are easily blanked off with standard blanking plugs.
- Galvanised steel with epoxy powder coat — corrosion resistance suitable for Queensland coastal and subtropical climates; finish is standard RAL 7032 Beige.
- IP23 degree of protection — vertical drip ingress sealed; not submersible or rated for direct splash or rain-facing exposed installations; indoor/undercover only.
Where to use
- New residential builds and unit developments — the Clipsal 230DRAQTPL is a standard fit for Queensland new-build domestic metering and distribution; the 21-module capacity covers single-dwelling service to 200A+ load configurations.
- Temporary supply requirements — AS/NZS 3012 compliant with the meter isolation link fitted; suitable for site offices, temporary construction power, and short-term temporary supply during renovation or new work.
- Routine meter box replacements — domestic replacements where the existing earthing and mains entry are compatible; the 230DRAQTPL is a drop-in fit for most Australian meter box cavity dimensions.
- Renovation and extension work — retrofit installations where a new meter box and switchboard are required; the semi-flush design suits plasterboard and masonry without deep cavity cutting.
- Small commercial installations — shops, offices, and light industrial sites where a modest circuit count and quick installation time are priorities; the 21-module capacity covers most small commercial load requirements.
- Queensland compliance-driven installations — where Queensland-specific hardware (Type 21 module, isolation link provision) is mandated by supply authority or builder specification.
The Clipsal 230DRAQTPL is not rated for external walls, damp exposed locations, or weatherproof installations. Do not install the 230DRAQTPL in bathrooms, outdoor wet areas, laundries, or locations subject to splash or rain exposure. It is an indoor switchboard only and must be installed in a dry, well-ventilated location.
Verified Sparky Direct customer reviews: Clipsal 230DRAQTPL | Box Meter DinRail SW/BD Temp Supply with Meter Isolationlink Qld (230DRAQTPL)
"Good quality enclosure at a nice price." — Ian
"Great value for money, QLD compliant hardware" — Scott
"Easy to install and connect to." — Jeff
