Clipsal by Schneider Electric | Solis T Series Wiser Toggle Adaptor | Ebony Aluminium
The Clipsal 40TWSA-EA is a toggle adaptor for the Clipsal Solis T Series, designed to accept a Wiser module and present it as a single toggle switch control. The 40TWSA-EA is an aluminium component with a metallic ebony finish, measuring 51mm high by 22mm wide by 30mm deep. It fits by click-in fixing, mounts flush, installs horizontally, and carries RCM certification.
A smart module handles the switching but contributes nothing to how the wall plate looks or feels under the hand. The toggle control type is the deciding choice on a Solis job, since it determines the physical action the occupant receives. The ebony aluminium finish governs how the plate reads against the wall and adjacent hardware.
Specifying finish and control style at the adaptor rather than the module means the same smart module works behind different looks across a project. Click-in fixing assembles without tools once the module is in place, and flush mounting holds the adaptor level with the plate for the finish expected in residential, commercial, and hotel fit-out.
Features
- Toggle switch control type — the adaptor presents the Wiser module as a toggle action rather than a rocker or push button.
- Solis T Series range — designed as part of the Clipsal Solis T Series, matching the range's plate system and finishes.
- Wiser module carrier — the 40TWSA-EA is built to accept a Wiser module and does not switch anything itself.
- Ebony aluminium finish — aluminium surface with a metallic treatment in the ebony tint.
- Aluminium construction — the adaptor body is aluminium rather than moulded plastic.
- Click-in fixing mode — assembles into position without tools or separate fasteners.
- Flush device mounting — sits level with the plate face rather than proud of it.
- 51 x 22 x 30mm — 51mm high, 22mm wide, and 30mm deep.
- Single switch position — the adaptor covers one switch position, so multi-gang plates need one per position.
- Horizontal installation only — the datasheet specifies horizontal installation direction for this adaptor.
- 0 to 45 degrees C ambient — a narrower operating range than most wall accessories, with 10 to 95 percent relative humidity.
Where to use
- Residential smart lighting — the 40TWSA-EA gives Wiser control a toggle action on Solis T Series plates through the home.
- Hotel and accommodation fit-out — rooms where a consistent finish and a familiar switching action matter to the guest experience.
- Commercial office and reception — front-of-house areas where the plate finish is part of the interior specification.
- Darker interior schemes — the ebony aluminium tint suits dark joinery, feature walls, and matte black hardware.
- Multi-gang smart plates — one adaptor per switch position where several Wiser modules sit on a single plate.
- Retrofit into existing Solis installations — adding or converting a position to Wiser control within a plate system already fitted.
The 40TWSA-EA is an adaptor only: it carries no switching mechanism and needs a Wiser module and a Solis T Series plate to function. Installation direction is horizontal, and the adaptor covers a single switch position. The 0 to 45 degrees C operating range rules out unconditioned spaces that run hotter, and installation is a licensed electrician's work.
