Clipsal by Schneider Electric | Pro Series Vertical Single Power Point 10A 250V | Extra Vivid White
The Clipsal P3015V-XW is a vertical single switched socket outlet rated 10A 250V, supplied complete in Extra Vivid White. The P3015V-XW combines one 2P+E shuttered socket with one rocker switch in a flush-mounted plate measuring 116mm high, 78mm wide and 27mm deep. Schneider Electric lists the outlet to the Australian and New Zealand standard with an earthing contact and the earth lug in the straight 180 degree position. The listing records AS/NZ 3112 and an IK08 impact rating.
Commercial outlets take plugs in and out all day, and the face wears in a way a domestic point never does. Loose skins, marked plates and unreadable circuit labels are what a facilities manager notices on a walk-through, long before anything electrical fails. The P3015V-XW answers that with a secured skin, an IK08 impact rating and large integrated circuit identification windows that keep the reference legible for the life of the fitting.
Termination is where the time goes on a commercial rough-in, and Schneider Electric builds the P3015V-XW around three screw terminals accommodating up to four 2.5mm conductors at a 16mm stripping length. 85mm mounting centres correspond to the standard punch spacing, so the plate registers on an existing wall box without measurement. The outlet arrives as a complete product, eliminating the separate grid and skin from the ordering and reconciliation against a schedule. The vertical format accommodates the narrow returns and column faces a commercial floor plan generates.
Features
- Vertical single outlet — the P3015V-XW carries one switched socket in a vertical plate, which suits narrow wall positions.
- 2P+E shuttered socket — Schneider Electric lists a 2P+E outlet pole configuration with a shutter across the socket.
- Complete product — the P3015V-XW is supplied as the finished outlet rather than as a separate grid, mechanism and skin.
- Three screw terminals — the listing records three screw terminals accommodating up to four 2.5mm cables per terminal.
- 16mm wire stripping length — the specified strip length for termination, which sets the gauge on the strippers before the run starts.
- 85mm mounting centres — the fixing centres match the standard punch spacing used across Australian wall boxes.
- Flush device mounting — Schneider Electric lists flush as the device mounting for the P3015V-XW.
- 10A 250V rating — rated for a 10A general purpose circuit at 250V, which covers standard commercial power positions.
- IK08 impact rating — the listing records IK08 protection, which covers the mechanical knocks a commercial wall plate takes.
- AS/NZ 3112 listed — the listing records the Australian and New Zealand socket outlet standard, with earthing contact.
- Circuit identification windows — Pro Series carries large integrated windows so circuit labelling stays legible and permanent.
- Extra Vivid White finish — supplied in the Extra Vivid White (XV) colour, with bevelled edges that deflect impacts.
Where to use
- Narrow commercial wall returns — the vertical P3015V-XW fits column faces and returns where a horizontal plate will not sit.
- Office fit-outs — a single 10A point at desk height feeds a workstation without committing wall space to a double.
- Plant rooms and back-of-house — Pro Series is built for the working side of a building rather than display areas.
- Corridors and service risers — a single vertical outlet suits cleaner and maintenance positions along a run.
- Schools and institutional buildings — the IK08 rating and secured skin suit walls that take daily traffic.
- Retail and hospitality back areas — the P3015V-XW handles single-appliance positions behind counters and in store rooms.
- Circuit-labelled installations — the integrated windows keep the circuit reference on the plate where it stays readable.
- Staged commercial rough-ins — the complete product lands on the box in one visit rather than as a frame and a later fit-off.
The P3015V-XW is rated 10A at 250V, so it is not the outlet for a 15A appliance circuit. Schneider Electric lists it as a vertical switched socket with flush device mounting, which rules out a horizontal position and a surface-mounted installation. Installation is work for a licensed electrician, and Clipsal voids the warranty where the product is installed by anyone else.
