Search Results:
Search Results:
Search Results:
Search Results:
The EGLO 206107N is a 90mm recessed LED downlight with a built-in motion sensor, rated 8W at 220-240V and 1100 lumens. The 206107N carries an IP44 protection degree from the front of the fitting, Class II double-insulated construction and an IC-4 thermal rating. Colour temperature is switched on the back of the fitting across 3000K, 4000K and 5000K. The LED board is integrated and the CRI is above 80.
Hallways, stairwells and garages are where a light gets left burning, or gets walked past in the dark. The 206107N runs an integrated motion sensor, so it switches at the point of light rather than at a wall plate. Detection covers 120 degrees below the fitting, wide enough to read a passage from a standard ceiling.
The 206107N lands on a plug-and-socket connection, so the fitting pushes into an existing ceiling socket and two springs hold it. The colour temperature switch sits on the back of the body and is set before the downlight goes up. The tint is decided at fit-off, not at order time. Class II construction means no earth is landed at the fitting.
The EGLO 206107N is an indoor fitting and is not rated for outdoor use. The IP44 rating applies from the front face only once the downlight is mounted, so the body above the ceiling must stay dry. The 206107N must not be installed where it faces jetting water or immersion.
(206107N)
The 206107N needs a 90mm round cut-out, made with a 90mm hole saw after the power is switched off at the board. The fitting plugs into a ceiling socket, then two side springs fold back against the body and tense onto the plaster to hold it in place.
Detection reaches a maximum of 3 metres across a 120 degree cone, based on a 3 metre installation height. The light holds for one minute after detection, and any new movement restarts the one minute timer.
A daylight sensor limits detection to low ambient light conditions, so the fitting does not switch on in a well-lit room or during daylight hours. Detection resumes once ambient light drops.
A colour temperature switch on the back of the fitting selects 3000K warm white, 4000K neutral white or 5000K cool white. Set it before the downlight goes into the ceiling, because the switch is not reachable once the fitting is installed.
The fitting holds an IC-4 thermal rating, so it can be abutted and covered with thermal insulation in normal use. Minimum clearance from the luminaire to any normally flammable building element is 0mm, and minimum clearance from the top of the luminaire to building insulation is 0mm.
Any electrical wiring must be carried out by a licensed electrician and must follow the Australian wiring rules. Where a ceiling socket is already in place, the fitting plugs straight in. Where no socket is present, a licensed electrician needs to install one.
The fitting is rated IP44 from the front of the fitting once mounted, which covers splashing water at the exposed face. That suits bathroom and laundry ceilings, subject to the zone requirements applying to the location. It is an indoor fitting and is not rated for outdoor positions.
The EGLO 206107N is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 1 Year Warranty
Warranty Method: Return to Sparky Direct
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | EGLO |
| SKU | 206107N |
| Model # | 206107N |
| Barcode # | 9008606292356 |
| Package Weight | 0.349kg |
| TYPE | VALUE |
|---|---|
| Type | Downlight |
| Brand | EGLO |
| Range | RIPPA 2 |
| Colour | White |
| Light Colour (K) | 3000/4000/6000 |
| Voltage (V) | 220-240 |
| Wattage (W) | 8 |
| IP Rating | IP44 |
| Cut-Out Size (mm) | 90 |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.