Skip to main content
Get $15 Prezzee on $150 MAX9 or Clipsal Lighting | FREE Clipsal Shipping $330+ View

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Wattmaster | Double Sided Adhesive Tape 12mm x 10m | 1.7mm Thick Adhesive

        The Wattmaster DST12 is a 12mm wide double sided adhesive tape supplied on a 10 metre roll, with a 1.7mm thick adhesive layer. The DST12 carries adhesive on both faces, bonding two surfaces together without screws, rivets, or other mechanical fixings. The 12mm bonding face suits slim trims and small components where a wider tape would overhang the part.

        Slim trims, edge profiles, and small mounting plates present a very limited bonding area for adhesive fixing. A wider tape overhangs the component, then remains visible along the edge or accumulates dust once the installation is finished. The 12mm bonding face remains inside the footprint of a narrow component and stays concealed after installation. A 1.7mm adhesive layer still bridges the surface texture that defeats thin double sided tape on painted timber, render, or moulded plastic.

        The DST12 spends its working life on small fixings: a label plate, a clip on a finished surface, a moulding positioned before the permanent fixing goes in. A narrow tape also stretches further, because ten metres at 12mm covers considerably more individual fixings than the same length in a wider roll. The adhesive bond remains between the components, so the visible surface carries no screw heads and no plugs to fill. On second fix and handover work that keeps the remedial list short.

        Features

        • 12mm tape width — a narrow bonding face that stays inside the footprint of slim trims, plates, and small components.
        • 10 metre roll length — a single roll covers a large number of small fixings before it needs replacing.
        • 1.7mm adhesive thickness — thicker than standard flat double sided tape, so the adhesive takes up minor surface unevenness.
        • Adhesive on both faces — bonds two surfaces directly, with the joint concealed between the parts rather than laid over them.
        • Grip on irregular surfaces — the thicker layer holds contact where a thin tape only meets the high points of a textured material.
        • No drilling required — the DST12 fixes components without screw holes, wall plugs, or patching on a finished surface.
        • General purpose mounting and joining — Wattmaster supplies the tape as a multipurpose fixing rather than a single-application product.
        • Cut to suit the job — the roll format lets the DST12 be cut to whatever length a fixing needs, with no fixed pad sizes to work around.
        • One year warranty — the DST12 carries a one year warranty for domestic and commercial use, handled as a return to Sparky Direct.
        • No published load rating — Wattmaster publishes no weight or shear figure for this tape, so heavier items still need mechanical fixings.
        • No electrical rating — the DST12 carries no voltage or insulation rating and does not replace approved insulation tape.

        Where to use

        • Slim trim and edge profile fixing — the DST12 mounts narrow trims and edge strips onto finished walls and joinery without screw holes.
        • Label and identification plates — fixes small labels, tags, and plates where a wider tape would show beyond the edge of the item.
        • Clip and accessory mounting — holds small clips, holders, and covers on finished surfaces that should not be drilled.
        • Workshop and bench assembly — positions small components and templates while the rest of an assembly goes together.
        • Renovation and second fix work — joins light parts on refit jobs where the wall or joinery surface is already painted and finished.
        • Vehicle and toolbox fit out — the DST12 mounts small holders and covers inside a fit out where drilling the panel is unwelcome.
        • Textured and moulded surfaces — the 1.7mm adhesive layer on the DST12 keeps contact on render, textured board, and moulded plastics.

        The Wattmaster DST12 is not rated for electrical insulation and does not replace approved insulation tape on conductors, joints, or terminations. Wattmaster publishes no load or shear figure for the tape, so it should not carry heavy items, overhead loads, or anything where a failure would cause injury or damage. No weathering, UV, or temperature data is published either, so the DST12 is not rated for outdoor or wet exposure.

        (DST12)

        Wattmaster double sided tape is used for mounting, joining and securing materials without screws or mechanical fixings.

        It commonly bonds to metal, plastic, glass, timber and other smooth or slightly uneven surfaces.

        Yes. The thicker adhesive layer helps improve bonding on rough or irregular materials.

        For lightweight mounting and fixing tasks, yes. Heavier loads may still require mechanical fixings.

        Yes. The thicker adhesive can help absorb small gaps and improve surface contact.

        Yes. Sparky Direct stocks Wattmaster double sided tape with fast dispatch across Australia.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Wattmaster
        SKU DST12
        Model # DST12
        Barcode # 9328587010603
        Package Weight 0.075kg
        TYPE VALUE
        Type Double Sided Tape
        Brand Wattmaster
        Width (mm) 12
        Length (mtrs) 10
        Thickness (mm) 1.7

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products