Skip to main content
Get $15 Prezzee on $150 MAX9 or Clipsal Lighting | FREE Clipsal Shipping $330+ View

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Wattmaster | Double Sided Adhesive Tape 18mm x 10m | 1.7mm Thick Adhesive

        The Wattmaster DST18 is an 18mm wide double sided adhesive tape supplied on a 10 metre roll, with a 1.7mm thick adhesive layer. The DST18 carries adhesive on both faces, so it bonds two surfaces together without screws, rivets, or other mechanical fixings. The thicker adhesive layer grips irregular surfaces where a thin tape only touches the high points.

        Mounting a trim, a cover strip, or a lightweight panel onto a finished surface frequently rules out mechanical fixings. Screw penetrations in plasterboard, tile, or laminated joinery create patching work. On handover and rental jobs that repair lands back on the quote. A 1.7mm thick adhesive layer bridges the minor irregularities and surface texture that prevent thin double sided tape from adhering. The 18mm width gives adequate contact area for trims and light panels without overhanging the component.

        A roll of DST18 lives in the van and covers repeat fixing tasks through the day: a cover strip, a bracket held square during assembly, a light panel positioned before permanent fastening. Ten metres at 18mm covers a lot of ground, so one roll services multiple jobs before it needs replacing. Because the tape carries adhesive on both faces, the fixing sits concealed between the components and leaves no visible fastener on the finished surface. That matters on installations the customer inspects closely.

        Features

        • 18mm tape width — gives a contact strip wide enough for trims, cover strips, and small panels without overhanging the part.
        • 10 metre roll length — one roll covers repeat mounting tasks across several jobs before it needs replacing.
        • 1.7mm adhesive thickness — thicker than standard flat double sided tape, so the adhesive takes up minor surface unevenness.
        • Adhesive on both faces — bonds two surfaces directly, with the joint hidden between the parts rather than sitting over them.
        • Grip on irregular surfaces — the thicker layer holds contact where a thin tape only meets the high points of a textured material.
        • No drilling required — the DST18 mounts items without screw holes, wall plugs, or patching on a finished surface.
        • General purpose mounting and joining — Wattmaster supplies the tape as a multipurpose fixing rather than a single-application product.
        • Cut to suit the job — the roll format lets the DST18 be cut to whatever length a fixing needs, with no fixed pad sizes to work around.
        • One year warranty — the DST18 carries a one year warranty for domestic and commercial use, handled as a return to Sparky Direct.
        • No published load rating — Wattmaster publishes no weight or shear figure for this tape, so heavier items still need mechanical fixings.
        • No electrical rating — the DST18 carries no voltage or insulation rating and does not replace approved insulation tape.

        Where to use

        • Trim and cover strip mounting — the DST18 holds edge profiles, trims, and cover strips onto finished walls without screw holes.
        • Light panel fixing — mounts lightweight panels and backing boards where a mechanical fixing would mark or split the substrate.
        • Workshop and bench assembly — holds jigs, templates, and light components in position while the rest of the assembly goes together.
        • Renovation and fit out work — joins parts on refit jobs where the wall or joinery surface is already painted and finished.
        • Signage, labels, and plates — the DST18 fixes small signs, labels, and identification plates to smooth or lightly textured surfaces.
        • Vehicle and toolbox fit out — mounts holders, covers, and light fittings inside a fit out where drilling the panel is unwelcome.
        • Textured and uneven substrates — the 1.7mm adhesive layer on the DST18 keeps contact on render, textured board, and lightly ribbed plastics.

        The Wattmaster DST18 is not rated for electrical insulation and is not a substitute for approved insulation tape on conductors, joints, or terminations. Wattmaster publishes no load or shear rating for the tape, so it should not carry heavy items, overhead loads, or anything where a failure would cause injury or damage. No weathering, UV, or temperature data is published either, so the DST18 is not rated for outdoor or wet exposure.

        (DST18)

        Wattmaster double sided tape is used for mounting, joining and securing materials without screws or mechanical fixings.

        It commonly bonds to metal, plastic, glass, timber and other smooth or slightly uneven surfaces.

        Yes. The thicker adhesive layer helps improve bonding on rough or irregular materials.

        For lightweight mounting and fixing tasks, yes. Heavier loads may still require mechanical fixings.

        Yes. The thicker adhesive can help absorb small gaps and improve surface contact.

        Yes. Sparky Direct stocks Wattmaster double sided tape with fast dispatch across Australia.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Wattmaster
        SKU DST18
        Model # DST18
        Barcode # 9328587010610
        Package Weight 0.106kg
        TYPE VALUE
        Type Double Sided Tape
        Brand Wattmaster
        Width (mm) 18
        Length (mtrs) 10
        Thickness (mm) 1.7

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products