Cover Only
Clipsal Iconic STLY S3025CSC-SH | Connected Socket (3025CSC) | Silver Shadow (SKIN ONLY)
$29.13
$26.48 ex. GST
Search Results:
Search Results:
Search Results:
Search Results:
Find the best Clipsal Iconic Styl power point plate covers here at Sparky Direct. [ Read More ]
Styl skin power point cover plates sit at the top of the Clipsal Iconic decorative range. They are anodised aluminium covers designed to clip over an existing Iconic grid and mechanism. The skin is purely cosmetic. It changes the look of the outlet without touching the wiring behind the wall plate. Builders, renovators, interior designers, and electricians choose Styl skins to lift the finish of a room from standard plastic to a premium metallic look. The mechanism and grid behind the cover are separate components and must already be installed or ordered alongside the skin.
A Styl skin is a clip-on cover plate for compatible Clipsal Iconic grid assemblies. It is a skin-only product. The power point mechanism and grid are not included unless the product listing states otherwise. The skin provides a premium metallic finish over an existing Iconic outlet. The visible surface is anodised aluminium, which gives a consistent, hard-wearing finish suited to feature walls and visible outlet positions in residential and boutique commercial work.
The Clipsal Iconic platform uses three parts. The mechanism handles the electrical function. The grid holds the mechanism in place against the wall box. The skin clips onto the outer face of the grid and provides the decorative finish. Once the Iconic mechanism and grid have been installed by a licensed electrician, the cover skin can usually be swapped without electrical work. The skin does not alter the wiring, circuit protection, current rating, or outlet performance.
Skin plate covers let the visible finish of an outlet change without the cost or disruption of replacing the full power point. They suit kitchens, bathrooms, home offices, media rooms, boutique commercial fit-outs, and premium renovation projects. A homeowner can refresh a room by swapping skins where the Iconic platform is already installed. Builders and designers can specify a consistent finish across Iconic switches and power points in the same room for a unified look.
Iconic is one of the most widely specified wiring accessory platforms in Australia. Its appeal is modularity. The electrical mechanism, the mounting grid, and the decorative skin are three separate parts. That separation makes Iconic flexible for renovators and builders. The same wired outlet can be refreshed with a new cover skin later, without rewiring or rebuilding. Iconic also supports a broad range of functions on the same look, including power, switching, USB charging, data, and connected sockets.
The mechanism is the electrical component that carries current to a plug. It is installed and wired by a licensed electrician. The grid is the mounting frame that secures the mechanism inside the wall box and accepts the skin. The skin is the decorative cover that clips over the finished assembly. The skin is the visible part on the wall. A range of Clipsal Iconic mechanisms can sit behind a Styl skin once the configuration matches.
Styl power point skins are designed for the Clipsal Iconic grid system only. They do not fit Clipsal Classic, Saturn, Saturn Zen, Solis, NLS Classic, or any non-Iconic wall plate system. Compatibility is determined by the underlying product family, not by colour or socket count. Before ordering, check the product series stamped on the existing plate or ask the original electrician to confirm. Ordering the wrong family is the most common reason a skin will not clip into place.
Iconic supports a broad mix of mechanisms and accessories on the same platform. A wall may carry a switched double GPO, a USB charging outlet, a data point, and a light switch, all under matching Styl skins. This is useful in kitchens, study nooks, home theatres, hotel rooms, reception areas, and serviced apartments. Matching Styl skins across switch covers and outlets gives a consistent room finish. Specifying the same finish across the project keeps the appearance uniform from room to room.
Styl skins are available in a small range of premium metallic finishes. Each suits a different interior palette. The aim is to match the cover finish to the room rather than treating the outlet as a default white feature. Stock and exact availability vary by configuration and should be confirmed on the live product page before ordering.
Silver is a clean, cool metallic finish. It works well against white walls, soft grey interiors, stainless appliances, and chrome tapware. Silver pairs well with modern kitchens and contemporary bathrooms where the outlet should sit cleanly without dominating the wall. It is the most neutral of the Styl colours and the easiest to specify across a mixed-finish room.
Silver Shadow is a deeper metallic. It suits dark cabinetry, cool grey palettes, matte black fixtures, and contemporary homes. The finish reads as a refined dark grey at room distance. It is a strong choice where standard white plastic plates would look too basic against the wall colour or the cabinetry. Silver Shadow works well in media rooms, bedrooms with feature walls, and commercial fit-outs with darker joinery.
Crowne is a warm metallic with a soft champagne tone. It suits brass tapware, timber cabinetry, warm stone benchtops, and luxury renovation schemes. Crowne is often specified in high-end residential builds where the design brief calls for warmth rather than the cooler look of silver. Consistency matters with Crowne. Once it is chosen, every visible outlet and switch in the same room should use it, so the warm tone reads correctly across the space.
Silver is the safe choice for neutral and modern interiors. Silver Shadow works for darker schemes and high-contrast feature walls. Crowne is the right choice for warm, premium, and design-led interiors. Builders and electricians should confirm finish selections early in the project. Locking in the colour at the specification stage avoids mixed finishes across project stages and reduces the risk of restocking the wrong colour mid-build. Order enough units in one go for the full room or stage.
Styl skin power point covers are made for the standard Iconic outlet configurations. The skin must match the layout of the installed grid and mechanism. A skin for a double GPO will not fit a quad outlet, a connected socket, or a switch plate. Match by configuration first, then by colour.
Double GPO skins are the most common option. They cover compatible double switched socket assemblies and are used through bedrooms, living areas, kitchens, and offices. The underlying mechanism accepts standard Australian three-pin plugs. The skin sits over the top, with cut-outs for the sockets and switches. Double power points are the workhorse outlet in Australian housing, and the Styl skin is the premium cover option for that format.
Single outlet skins and outlet-with-extra-function covers are available in selected formats. Examples include a single switched socket with an extra switch position next to it, used for appliance isolation behind benches, range hoods, or wall-mounted heaters. The skin layout must match the grid layout exactly. Use the model number and finish suffix when ordering to avoid receiving a skin that does not align with the cut-outs in the installed mechanism.
Quad skins are useful in high-demand areas. Home offices, AV walls, kitchens, workshops, and workbenches often need four sockets in one position. The skin does not increase the circuit capacity of the outlet. Circuit loading must still be assessed by a licensed electrician at the install stage. The cover only changes the finish of the visible plate. Quad power points are also available as complete outlets where the existing wall position needs to be upgraded from a double to a quad.
Selected Styl skins suit Clipsal Iconic connected sockets in the Clipsal Iconic Wiser ecosystem. The cover keeps the premium metallic finish while the smart mechanism behind it provides scheduling, remote switching, or automation. The skin does not add smart functions on its own. The smart capability lives in the mechanism. The role of the Styl skin in a smart outlet is the same as in a standard outlet: a premium decorative cover that matches the rest of the room.
Styl is the metallic option in the Iconic decorative range. Standard Iconic skins use plastic finishes. Iconic Essence sits between the two, offering softer, more natural design directions. Each suits a different brief. The choice is rarely about quality. It is about matching the visible cover to the room.
Standard Iconic covers are plastic. They are usually the more cost-effective option for areas where the outlet is not a visible design element. Styl covers are anodised aluminium and read as a premium upgrade. Styl is preferred when the power point is on a feature wall, near visible joinery, or in a room where everything else has been specified at the higher end. Standard covers remain a good choice in rental properties, garages, laundries, and utility rooms.
Styl has a metallic, contemporary look. Iconic Essence covers offer softer, more natural design directions in colours like Arctic White and warm neutrals. Both sit on the same Iconic platform and use the same compatible mechanisms. The choice between them comes down to the design brief. A minimalist contemporary kitchen tends to call for Styl. A softer, mid-century or coastal interior often pairs better with Essence.
Styl is the right specification for premium renovations, high-end residential builds, boutique offices, hospitality fit-outs, kitchens with visible designer hardware, and rooms where the outlet sits as part of the visual design. Standard Iconic covers may be more suitable for utility spaces, rental properties, budget projects, and areas where the outlet is not seen. The decision usually rests on visibility and the surrounding finish, not on electrical performance.
| Range | Material | Look | Best For |
|---|---|---|---|
| Standard Iconic | Plastic | Clean, neutral, cost-effective | Utility rooms, rentals, budget builds |
| Iconic Essence | Designer plastic | Soft, natural, warmer palette | Coastal, mid-century, soft contemporary |
| Iconic Styl | Anodised aluminium | Premium metallic, contemporary | High-end residential, hospitality, feature walls |
Cosmetic skin replacement and electrical installation are different tasks. The Styl skin is a decorative cover. Anything behind the skin, including the grid, the mechanism, the wall box, and the wiring, is electrical work and must be handled by a licensed electrician in Australia. The information below is general guidance, not a wiring instruction.
The Styl skin is a decorative exterior component. User-contact areas around the socket apertures remain designed for electrical safety as part of the underlying mechanism. Compatible Iconic products are designed to meet Australian electrical accessory standards when correctly selected and installed. The aluminium finish does not change how the outlet behaves electrically. The mechanism behind it does the electrical work and is the part that determines compliance.
Replacing a clip-on skin on an already installed compatible Iconic grid is generally a cosmetic task. It does not disturb the wiring. That said, installing, replacing, or altering the power point mechanism, the grid, the wall box, or any wiring must be performed by a licensed electrician in Australia. This is set by state and territory electrical safety law. If the existing outlet is not already Iconic, the upgrade to an Iconic mechanism and grid is electrical work and is not a homeowner task.
Before placing an order, confirm a short list of details. Confirm the existing plate is Clipsal Iconic and not Classic, Saturn, or another series. Confirm the configuration: single, double, quad, connected socket, or extra switch. Confirm the finish code and model suffix on the listing. Confirm whether the mechanism and grid are included. The product listing is the source of truth here. If the listing does not state that the mechanism and grid are included, assume the product is the skin only.
Licensed electrician required: Any work involving the mechanism, grid, wall box, or wiring behind the skin is electrical work and must be carried out by a licensed electrician. Swapping a clip-on skin on an already installed compatible Iconic grid is cosmetic. Anything beyond that is not.
Choosing the right Styl skin comes down to four checks in sequence: the platform, the configuration, the finish, and the durability of the cover for the room it sits in. Working through them in order avoids the most common ordering errors.
Physical compatibility comes first. Confirm that the existing product family is Clipsal Iconic. The colour of the existing skin or the number of sockets in the outlet does not confirm the platform. Look for the Iconic name or model code on the existing skin, or check with the electrician who installed it. If the existing system is Saturn, Saturn Zen, Classic, Solis, or NLS Classic, the Styl skin will not fit.
The skin cut-outs must match the layout of the installed grid and mechanism. A double GPO skin will not fit a quad outlet, a connected socket, or a switch plate, even if it carries the same colour. The simplest way to avoid a mismatch is to order by the full model number, including the suffix that indicates the configuration and the finish.
Finish consistency matters for visible walls and premium interiors. Mixed finishes on adjacent outlets read as a fault, not a feature. For bulk ordering, the safest approach is to order enough units for the full room or the full project stage in one go. That reduces the risk of restocking variation or a slightly different shade between batches.
Anodised aluminium offers a premium, durable finish. It should still be cleaned with non-abrasive methods. A soft cloth and a mild surface cleaner are appropriate. Harsh cleaners, abrasive pads, and solvent-based products can damage the anodised surface and leave permanent marks. In kitchens, near range hoods, and in bathrooms, light regular cleaning keeps the finish looking right over the long term.
Clipsal Iconic Styl skins are available through Australian electrical wholesalers and online suppliers. Buying online lets the trade compare finish options, configurations, stock visibility, and project quantities in one place. It also makes it easy to confirm the exact model number before ordering, which is the single most useful check when matching a skin to an existing outlet.
Sparky Direct is an Australian online electrical wholesaler that supplies Clipsal Iconic Styl skins, alongside the matching Clipsal Iconic Styl range of switch covers and accessories. Ordering online suits electricians and builders who need to pull a small list of model codes against a project schedule, check finish options, and place an order in one session without trips to a counter.
Bulk orders work best when the project finish is locked in before the first unit ships. For multi-room renovations, new builds, commercial fit-outs, and staged projects, confirm three things first: total quantity by configuration, finish consistency across all rooms, and the matching switch skins in the same finish. Splitting a finish across two orders weeks apart is the most common source of mid-project finish variation.
The cheapest cover on a listing is not always the best value. A cover priced below the rest of the range deserves three checks. Is it the right configuration. Is it the correct finish code. Is it the genuine Clipsal product. A skin that does not match the installed grid or that is not genuine Clipsal is a return, not a saving. Best value comes from correct model matching, reliable dispatch, and product support when something needs to be checked.
Club Clipsal is Australia's largest electrician community offering trade rewards, business support, and exclusive benefits. When you nominate Sparky Direct as your preferred wholesaler, we automatically apply your Clipsal spend points to your Club Clipsal account daily.
Entry-level offering coaching, mentoring, and training discounts
Unlock exclusive industry tools and networking events
Access Toyota fleet offers and business software discounts
Maximum benefits, including VIP experiences and rewards
1. Sign Up: Create your Club Clipsal account at clipsal.com/club-clipsal or via the iCat mobile app
2. Nominate Sparky Direct: Select Sparky Direct from the wholesaler dropdown menu in your profile
3. Add Email: Enter your Sparky Direct account email address in the membership number field
4. Start Earning: Every dollar spent on Clipsal products earns points automatically
Redeem points from the rewards store, including gift cards, tools, and experiences. Access business summits, product training, and industry networking events. Receive early access to new product launches and special promotions. Connect with fellow electricians via the Club Clipsal community app.
Watch Clipsal Iconic STYL Double Switched Internal Power point Cover Plate Crowne | S3025C-CE video
Watch Clipsal Iconic STYL Double Switched Internal Power Point Cover Plate Silver | S3025C-SV video
Watch Clipsal Iconic STYL Quad Switched Internal Power Point Cover Plate Silver | S3015/4C-SV video
Beautiful switches and power points. Turned boring, bland and plain switches into a feature on the walls. Client loved the suttle change.
Really nice looking switches. Solid consistent quality and will be purchasing more to finish off the rest of the house
Very nice looking face plate that's easy to install. Only wish they were cheaper so i could do the whole house
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Clipsal Iconic Styl Skin Power Point Cover Plates → Get Expert Advice →Yes, they are designed to fit securely and feel robust in use.
Sparky Direct supplies Clipsal Iconic Styl skin power point plate covers Australia-wide, offering premium Iconic finishes with convenient delivery.
They are securely packaged and delivered via standard courier services.
Unused products are generally eligible for return according to the seller’s returns policy.
Warranty coverage varies by product and manufacturer and typically covers defects in materials or workmanship.
Yes, Styl skin power point plate covers are typically sold individually.
Yes, selecting the correct configuration ensures proper fit and finish.
Yes, they are ideal for refreshing the appearance during renovations.
Yes, they can be used consistently for a cohesive look.
Yes, they form the visible face of the power point.
Yes, they are popular in projects where visual finish is important.
Yes, they are designed to complement contemporary and design-led spaces.
Yes, their smooth surfaces make them easy to wipe clean.
They are decorative cover plates designed to fit over Clipsal Iconic power point mechanisms, providing a premium Styl finish.
Yes, skins can be easily swapped to suit new colours or styles.
They allow you to upgrade the look of power points without replacing electrical components.
Yes, they are designed for everyday use and long-term appearance retention.
Yes, they are designed to clip onto compatible Clipsal Iconic mechanisms and grids.
Yes, they are suitable for residential and light commercial environments.
Yes, they are commonly used in residential homes and apartments.
The Styl range includes premium finishes designed to complement modern interiors.
They are designed to be used with compliant Clipsal Iconic electrical components that meet AS/NZS standards when installed correctly.
Yes, Styl skins can be changed without altering the electrical mechanism or wiring.
No, they are non-electrical cosmetic covers that clip onto compatible Iconic power point assemblies.
Yes, they are designed specifically to work with the Clipsal Iconic modular system.
