Clipsal by Schneider Electric | Iconic Styl Cover Frame 10A Single Switched Socket with Extra Switch | Silver Shadow
The Clipsal S3015XC-SH is a cover frame for a horizontal 10A switched socket with two rockers, finished in Silver Shadow. It sits in the Clipsal Iconic range under the Iconic Styl aesthetic, and its fixing mode is clip-on. The S3015XC-SH is supplied as a skin only, so the socket mechanism and grid plate are not included. The frame is anodised aluminium with a satin surface finish.
A switched socket that works perfectly can still look wrong once the wall around it is painted or retiled. Because this is a cover frame only, the finish at that position changes without disturbing the mechanism or the wiring. The Silver Shadow tint and metallic surface treatment carry across the Iconic Styl covers. One position or a whole run can be brought to the same finish.
At the wall the work is a fit-off change rather than a rewire. The clip-on fixing leaves the socket assembly in place behind the frame. The Silver Shadow tint runs across the Iconic Styl covers, so a finish started at one position can be carried to others without changing accessory range. The frame ships in a polybag as a single cover piece, with the grid and mechanism specified separately.
Features
- Cover frame only — the S3015XC-SH supplies the visible frame; the switched socket mechanism and grid plate are specified separately.
- Silver Shadow tint — the frame carries the Silver Shadow colour tint, coded SH at the end of the part number.
- Anodised aluminium — the cover frame material is anodised aluminium, giving a metal face at the wall.
- Satin surface finish — the outward face of the frame is satin, giving a low-sheen appearance in the fitting.
- Clip-on fixing — the fixing mode is clip-on, onto the switched socket assembly sitting behind the frame.
- Two rocker apertures — the frame is cut for two rockers, matching a switched socket that carries an extra switch.
- Single socket aperture — one power socket outlet opening, sized for a single-outlet mechanism.
- 10A rated current — the S3015XC-SH suits a switched socket with a rated current of 10A.
- Horizontal only — the installation direction is horizontal, which fixes the orientation of the position it goes onto.
- Flush device mounting — the device mounting is flush, sitting the assembly into the wall rather than onto it.
- EU RoHS compliant — declared compliant with the EU RoHS Directive and free of substances of very high concern under REACh.
- One-year warranty — the S3015XC-SH carries a one-year warranty covering both domestic and commercial use.
Where to use
- Finish changes at existing positions — the S3015XC-SH lifts the appearance of a socket position without touching the mechanism or the wiring behind it.
- Sockets with an extra switch — the two rocker apertures suit a single switched socket that also carries a separate extra switch.
- Horizontal socket positions — the S3015XC-SH is cut for horizontal installation, which covers bench, bedhead and console-height positions run that way.
- Flush wall installations — the flush device mounting suits plasterboard, brick and masonry positions where the assembly recesses into the wall.
- Fit-off on Iconic Styl jobs — the clip-on fixing lets the cover go on at the fit-off stage rather than during rough-in.
The S3015XC-SH is a cover frame only, and needs the matching switched socket behind it to work. No IP rating is specified, and the datasheet limits operation to 0 to 45 degrees C. The frame is cut for a horizontal socket with two rockers, so a vertical position will not fit.
