Dolly Only
PRICE DROP
Clipsal Iconic 49MLBLAOM-VW | 3-Position Auto-Off-Manual Dolly Rocker | Vivid White | Single Buy
Now $0.99
$0.90 ex. GST
Search Results:
Search Results:
Search Results:
Search Results:
Find the best Clipsal Iconic 3-position dollies here at Sparky Direct. [ Read More ]
This category covers Clipsal Iconic switch dollies and rocker identifiers, not transport dollies used to move equipment around a site. In the Iconic system, the dolly is the visible rocker insert that identifies and operates a switch position. A 3-position dolly gives the user three labelled states on one switch, such as Auto-Off-Manual, Sensor-Off-On or Up-Off-Down.
Several terms appear across this category, and each one describes a specific control idea. Three-position switching means the switch presents three operating states rather than simple on and off, with centre-off control turning the circuit off in the middle position. Manual override means a labelled position lets a person take direct control from an automatic mode. Labelled rocker functions are printed or engraved legends that show what each switch does.
This range suits electricians, fit-off teams, maintenance contractors, builders, facility managers and informed buyers who specify or replace Iconic switch accessories. The wider Clipsal Iconic switches and dimmers range sits behind these dollies and sets how each circuit actually works.
The word dolly causes confusion in search, because it can mean very different things. A Clipsal switch dolly is a small clip-in rocker for a wall switch, not a hand trolley, furniture dolly or equipment-moving platform. Clipsal Iconic dollies do not carry electrical equipment, switchboards, panels or heavy loads, and they have no weight rating because they are not load-bearing parts.
If you need to move heavy gear, this category is not the right fit, so source load-rated handling equipment from an industrial or safety supplier instead. For wall switching and clear position labelling, the Iconic dolly range is the correct product.
A 3-position dolly sits on the front of an Iconic switch, while the mechanism behind it does the electrical work. The dolly shows the user which state is selected, such as Sensor, Off or On, and the visible rocker must match the mechanism fitted behind it. A label that does not match the mechanism creates confusion and operating errors for everyone who uses the switch.
Wiring, mechanism replacement and circuit changes are electrical work, so in Australia a licensed electrician must complete that work. The dolly itself is only a clip-in cosmetic and identification part, not a wiring component.
Clear labels help everyone who uses a switch, supporting identification, user clarity, maintenance efficiency and handover records. A labelled dolly reduces confusion in lighting control, sensor override, fans, blinds, shutters, access control and automation applications. People can then see each function directly, without testing every switch by trial and error.
Consistent labelling also helps trade workflows, because larger jobs need many switch points fitted the same way. Matching legends across a site keep the result tidy and predictable for the next person on the job.
The Iconic range offers several dolly configurations, and it helps to organise them by use rather than by code alone. Start with the control function you need, then confirm the colour, finish and legend text so the dolly matches the wider installation. The right choice depends on both the circuit and the look of the room.
Sensor-Off-On labelling suits a sensor-controlled circuit that also needs a manual override. The three states let a user run the sensor, force the circuit off, or switch it on by hand. This pattern works well in garages, laundries, hallways, amenities, storerooms, offices and commercial back-of-house areas.
Check that the dolly matches an Iconic PIR sensor control layout and a 3-position mechanism, because the label alone does not create the sensor function. The mechanism and wiring behind it set how the circuit actually behaves.
Auto-Off-Manual labelling suits a circuit that runs on a schedule or automated control, and the manual position gives a clear way to take direct control. Common uses include lighting control, exhaust fans, HVAC-related control circuits, pumps and building automation interfaces. The Clipsal Iconic fan controllers range and related Iconic dimmers and timers often sit alongside these switches.
Final circuit design is the electrician's responsibility, so always check the product documentation and project requirements before fit-off. The dolly label must reflect how the circuit actually operates in the finished installation.
Up-Off-Down and directional labels suit raise and lower control, with typical uses including blinds, shutters, vents, awnings and equipment with directional drives. The dolly label should match the installed control logic, because a mismatch leads to operating confusion, such as Up moving a blind down.
On multi-zone jobs, specify matching legends across every control point, since consistent labelling reduces callbacks across commercial and residential installations. Smart and automated layouts, including Clipsal Iconic Wiser controls, also benefit from clear and repeated legends.
A blank dolly suits a switch that does not need a printed legend yet, while custom text or engraving suits permanent, site-specific identification. Useful examples include Fan-Off-Auto, Pump-Off-Auto, Open-Off-Close and Day-Off-Night, and engraved legends stay readable for the full life of the switch.
Confirm the exact label before ordering custom items, because correct text, colour and function reduce fit-off delays and rework. For pictogram options across switch types, the Clipsal Pro Series pictogram rockers and dollies range gives further choices. Load-rated cooker circuits often pair with Clipsal Iconic cooker switches and matching legends.
Compatibility is the most common cause of ordering mistakes, so use a short checklist before you buy. Confirm the dolly, the mechanism, the grid, the skin and the complete switch assembly before placing an order. Remember that a labelled dolly alone does not turn a standard 2-position switch into a 3-position switch, because the mechanism behind it sets the number of working positions.
Check the underlying Iconic mechanism before you order replacement rockers, since the Clipsal Iconic mechanisms range carries the parts that do the switching. Confirm the pole configuration, current rating, application type and wiring diagram first. For a complete unit, the Clipsal Iconic complete switches range pairs the mechanism and plate together.
Incorrect pairing can create a poor user experience or a switch that does not work at all. A 3-position dolly needs a matching 3-position mechanism, so match the rocker to the mechanism rather than the other way around.
Finish matters in premium residential and commercial interiors, where common Iconic finishes include Vivid White, Black, Anthracite and Styl variants. The Clipsal Iconic Styl range and the Clipsal Iconic Essence range use different skins and trims across the same switch platform. A colour-matched dolly keeps the fit-off consistent across a whole space.
On renovation work, the existing skins and grids often set the correct finish. The Clipsal Iconic skin switch plate covers and the switch grids and blank plates range help match older installations. Check the current skins, grids and parts on site before ordering any replacement dollies.
List the mechanism SKU and the dolly SKU separately in schedules, quotes and purchase orders, so the order stays clear for everyone on the job. Note the legend text for each switch point as well, so custom items are always correct.
Plan quantities for the whole job rather than just one room, because multi-dwelling, commercial, service and maintenance work often needs spares. Allow for extra dollies to cover handover changes and damaged inserts on larger sites.
A 3-position dolly is not always the right choice, and a standard 2-position rocker is enough for many circuits. The comparison below shows where each option fits best, so choose based on the circuit and the way people will actually use the switch.
| Feature | Standard 2-Position Rocker | 3-Position Rocker |
|---|---|---|
| Operating states | On and Off | Auto, Off and Manual (or similar) |
| Typical use | Simple lighting and general switching | Sensor override, automation and directional control |
| Complexity | Lower, very common | Higher, used where three states are needed |
| Label clarity | Basic on and off | Clear, repeatable centre-off state |
| Relative cost | Lower | Small additional accessory cost |
Standard rockers handle simple on and off switching, and they suit standard lighting, basic exhaust fan switching and general purpose control. These rockers are common, simple and low in complexity, so for most everyday circuits a standard rocker does the job perfectly well.
A 3-position rocker suits a circuit that needs automatic, off and manual states, where the centre position must be clear and repeatable for users and maintenance teams. The added value comes from control clarity, operational flexibility and reduced ambiguity, so people can read the selected state at a single glance.
A 3-position dolly is worth the small extra cost when a circuit genuinely needs three states or a labelled override. A clear legend can avoid callbacks, user confusion and incorrect operation, and the minor accessory cost is small next to a return visit.
Avoid overspecifying a 3-position dolly where a normal 2-position switch already meets the requirement. Match the dolly to the actual circuit function, because more positions do not help when the circuit only switches on and off.
Use a simple framework to choose the right dolly online, and confirm the control function, the mechanism, the label, the finish and the quantity. The Clipsal Iconic ecosystem keeps these parts consistent across a whole job, so good information before ordering reduces returns and avoids delays.
Start with the control function the circuit needs, then confirm the mechanism, label, finish and quantity. Check existing switchgear photos, as-built documentation, product codes or the electrician's schedule before ordering, because this single step prevents most common errors.
Remember that circuit changes and mechanism installation are licensed electrical work, so a licensed electrician must handle wiring and mechanism changes. The dolly choice always sits within that wider installation plan set by the electrician.
Have the key details ready before you order, including the application, finish, legend text, matching mechanism and project quantity. Consistent SKU naming then helps staged fit-off and replacement stock, so order spares where the work runs across several stages.
Sole traders and small electrical businesses need reliable, repeatable parts for service work and small projects. Keep common dollies and matching accessories in the service van where it suits the type of work.
Order custom labelled items with extra care, because text, colour and function must all be correct before installation. A quick check at order time avoids wasted parts and unnecessary return trips.
This section stays practical and does not give wiring instructions, but it does separate cosmetic dolly replacement from electrical mechanism work. Australian compliance rules apply to all electrical work carried out on a switch.
A clip-in dolly can often be swapped as part of the visible switch face, but the wiring and the mechanism behind it remain electrical work. Where a circuit, mechanism, sensor, load or switch wiring changes, a licensed electrician is required.
Confirm compatibility with the product data sheet and the current Australian wiring rules before you start. The data sheet lists the correct mechanism and legend, so check it before ordering or fitting any replacement part.
A few mistakes appear again and again on fit-off, and they are easy to avoid with a quick check. The first is ordering a labelled dolly without the correct mechanism, and the second is choosing the wrong legend, finish, colour, orientation or product family. The third is assuming a 3-position dolly is a transport dolly or a heavy-duty equipment mover.
Record switch labels in as-built drawings, maintenance manuals and tenancy handover records for every job. Permanent legends help commercial, strata and facility-managed sites, because they let maintenance teams identify sensor overrides and automation controls quickly. Good records also save real time for the team at the next service visit.
Club Clipsal is Australia's largest electrician community offering trade rewards, business support, and exclusive benefits. When you nominate Sparky Direct as your preferred wholesaler, we automatically apply your Clipsal spend points to your Club Clipsal account daily.
Entry-level offering coaching, mentoring, and training discounts
Unlock exclusive industry tools and networking events
Access Toyota fleet offers and business software discounts
Maximum benefits, including VIP experiences and rewards
1. Sign Up: Create your Club Clipsal account at clipsal.com/club-clipsal or via the iCat mobile app
2. Nominate Sparky Direct: Select Sparky Direct from the wholesaler dropdown menu in your profile
3. Add Email: Enter your Sparky Direct account email address in the membership number field
4. Start Earning: Every dollar spent on Clipsal products earns points automatically
Redeem points from the rewards store, including gift cards, tools, and experiences. Access business summits, product training, and industry networking events. Receive early access to new product launches and special promotions. Connect with fellow electricians via the Club Clipsal community app.
Watch Clipsal Iconic 40AMR-VW | Auto Manual Dolly Rocker | Single Buy video
Watch Clipsal Iconic 49MLBLSOO-VW | 3-Position Sensor-Off-On Dolly Rocker | Vivid White | Single Buy video
Watch Clipsal Iconic S40RSM3KB-SV | Dolly Rotary Off-1-2-3 Silver | Single Buy video
Took me an hour of running around the house with my wife to work out what the heck half the switches in the house do - we still have a single mystery switch - so if you happen by a house with "Merry Christmas and a Happy 1985" lit up on the roof - please let us know. These "Dolly Rocker" help enormously to keeping that straight in my head.
The light dolly rocker 40LR-VW is a great idea, we replaced our blank dolly with this pictured light dolly and it makes selecting the correct switch so much easier. My kids use to switch all the switches before finding the correct one. Should have changed them ages ago. I will be buying more.
Great little rocker to fit into light switches. Great when you've got multiple switches all together that do different things (like a fan heat light). Makes it easy to know what is what without the ugly labels of old!
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Clipsal Iconic 3-Position Dolly Rockers → Get Expert Advice →
