Search Results:
Search Results:
Search Results:
Search Results:
The NLS 20300 is a 12W vandal-resistant LED batten rated IP54, designed for ceiling or wall mounting in high-risk environments. The 20300 features a high-impact opal diffuser, surface-mount installation, and a lifespan of 30,000 hours, delivering 900–950 lumens of clean daylight illumination across carparks, garages, industrial facilities, and public spaces where tampering is a concern.
Carparks, garages, cellars, and industrial sites frequently face damage from vandalism or accidental impact. Standard fittings break easily, leaving facilities in darkness and creating safety hazards. The 20300 solves this problem with an IK10 impact-resistant opal diffuser that can withstand blunt-force damage without cracking or darkening. IP54 dust and water resistance extends service life in exposed or semi-exposed locations where moisture ingress would otherwise corrode standard fixtures. The combination of rugged construction and efficient LED output means fewer replacements and lower maintenance costs over the fixture's 30,000-hour lifespan.
Tradies and facilities managers value the NLS 20300 because it installs quickly onto a standard ceiling box or wall plate, fits within the existing wiring without modifications, and runs on a simple 240V feed. Large terminal blocks accommodate standard cable sizes without the need for terminal adapters. Once installed, the 20300 delivers consistent daylight-colour output (5000K, CRI >80 Ra) that doesn't fade over time, and the sealed opal diffuser stays bright even in dusty or damp environments. Stock rotation is straightforward since the 20300 is a standalone batten with no moving parts or remote controls to manage.
The NLS 20300 is not suitable for dimmed lighting applications, colour-tunable installations, or motion-sensor control without additional external controllers. Do not use on dimmer switches, Dali systems, or PWM-based control circuits designed for halogen or fluorescent dimmable sources. The 20300 is also not rated for fully submersed or high-pressure washdown environments; IP54 protects against splash and dust only, not full jet spray or immersion.
Verified Sparky Direct customer reviews: NLS 20300 | Shield-Lux Vandal Resistant 12w LED IP54 Batten 680mm (20300)
"Easy install, long lasting." — Harry
"Great quality outdoor light, easy to install." — Bev
"Great value for money compared to other brands. Would recommend for any application in public places." — James
(20300)
Installation must be carried out by a licensed electrician in accordance with the Electrical Safety Act. The 20300 requires a 240V hardwired connection to a circuit breaker or RCD protection and must be mounted to a solid ceiling plate, joist, or structural fixing rated for at least 2kg load.
No. The 20300 is a fixed-output LED fixture unsuitable for dimmer switches, Dali systems, or PWM control circuits. It operates on a simple on/off basis only, via standard MCB or RCD protection. Motion-sensor operation requires an external relay or timer module wired in series; the batten itself has no sensor input.
The key difference is the IK10 impact-resistance rating and the vandal-resistant opal diffuser. A standard IP54 weatherproof batten (like the NLS Fortitude range) protects against dust and moisture but may have a thin polycarbonate or acrylic diffuser prone to cracking under impact. The 20300 is engineered to survive ball throws, accidental vehicle strikes, and deliberate vandalism without failure.
The 20300 is rated IP54, suitable for semi-exposed areas like carpark soffits, sheltered gas-station canopies, and building soffits where splash and dust are present but sustained rain jet spray is not. It is not rated for full outdoor weatherproof (IP65) applications or high-pressure washdown. For fully exposed outdoor use, specify an IP65-rated weatherproof batten.
The 20300 has a CRI >80 Ra on the 5000K cool white colour temperature, meaning colour rendering is accurate for general industrial and commercial spaces. A CRI of 80+ is sufficient for security lighting, carpark visibility, and general task lighting. For colour-critical applications (retail displays, artwork), higher CRI options (90+) are available in other product ranges.
The average rated lifespan is 30,000 hours, equivalent to approximately 10 years of 8-hour daily use. The manufacturer provides a 2-year warranty covering manufacturing defects and premature failure under normal use and maintenance. Installation by a licensed electrician is required for warranty eligibility.
The 20300 has large terminal blocks that accept 1.0–2.5mm² cable without adapters, simplifying installation on 240V circuits. Active (L), Neutral (N), and Earth (PE) terminals are clearly marked. Do not exceed 2.5mm² cable gauge, as larger cable will not compress adequately and may cause loose connections.
Replacement opal diffusers and LED modules are available through NLS distributors and electrical wholesalers. Sparky Direct can source components on request. The average lifespan of 30,000 hours means diffusers may yellow slightly over time in dusty environments, but the fixture continues to operate at rated output until end-of-life.
The NLS 20300 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 2 Year
Commercial Use: 2 Year
Warranty Method: Return to Sparky Direct
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | NATIONAL LIGHT SOURCES |
| SKU | 20300 |
| Model # | 20300NLS |
| Barcode # | 9336700013660 |
| Package Weight | 1.600kg |
| TYPE | VALUE |
|---|---|
| Type | Batten Light |
| Height (mm) | 96 |
| Width (mm) | 96 |
| Length (mm) | 680 |
| Protection | IK10 |
| Mounting | Surface Mount |
| Lumens (lm) | 900–950 |
| Lighting Technology | LED SMD2835 |
| Light Colour (K) | 5000 |
| Wattage (W) | 12 |
| IP Rating | IP54 |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.