Skip to main content
Get $15 Prezzee on $150 MAX9 or Clipsal Lighting | FREE Clipsal Shipping $330+ View

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Clipsal by Schneider Electric | Bath Switch Mechanism 10A 250V 30 Series | White

        The Clipsal 30BM is a 10A 250V AC rocker switch mechanism marked Bath, supplied as a basic element for the Clipsal 30 Series grid and plate system. The 30BM has a two-way switch function, a single rocker, and one loop terminal for looping the active through the point. It carries a white surface marking and mounts flush behind a 30 Series plate.

        An unlabelled bank of rockers at a bathroom door generates callbacks and awkward questions during handover inspections. Once three or four identical rockers sit on one plate, identifying which one feeds the bathroom luminaire becomes guesswork. The Bath marking on the rocker surface resolves that identification problem permanently, with no engraved plate and no adhesive label. The 10A 250V AC rating covers standard domestic bathroom lighting circuits.

        Marked mechs let a contractor hand over a bathroom installation that needs no explanation. The 30BM shares the standard 30 Series grid footprint, so it lands in a multi-gang plate beside plain rockers with no change to the plate or grid. Keeping a few marked mechs on the van reduces a labelling request to a single component swap instead of a scheduled return visit. The two-way switching function covers single-position and two-position bathroom runs from one part number.

        Features

        • Bath surface marking — the word Bath is marked on the rocker surface, so the point is identified at a glance without a separate label or engraved plate.
        • 10A 250V AC rating — the 30BM is rated for standard domestic and light commercial lighting circuits at Australian mains voltage.
        • Two-way switch function — wires as a one-way or two-way point, covering both single-position and two-position bathroom switching from the one part number.
        • Single rocker actuator — one rocker per mechanism, matching the standard feel and travel of the wider Clipsal 30 Series mechanism range.
        • One loop terminal — allows the active to be looped through the point, reducing the number of joins needed behind the plate.
        • 30 Series grid footprint — the 30BM fits Clipsal 30 Series plates and grids, so it sits alongside other 30 Series mechs in a multi-gang assembly.
        • Flush device mounting — the datasheet lists flush mounting, matching standard wall box and plaster bracket installation on domestic walls.
        • Mechanism only — supplied as a basic element with no cover plate, grid, or mounting block, so a plate must be sourced to complete the point.
        • EU RoHS compliant — Schneider Electric lists the 30BM as EU RoHS compliant and mercury free on its published environmental declarations.
        • White finish — matches the standard white plate finish used across domestic Clipsal switch plates.
        • No IP rating listed — the datasheet states no ingress protection figure, so the mechanism is specified for interior positions only.
        • One-year warranty — Clipsal covers the mechanism for one year domestic and one year commercial use, serviced under the Clipsal in-home warranty method.

        Where to use

        • Bathroom lighting points — the 30BM marks the switch that feeds the bathroom light, which matters most on plates carrying three or four rockers.
        • Ensuites and powder rooms — a marked rocker separates the ensuite point from bedroom and hallway switching on a shared bank of switches.
        • Two-way bathroom runs — the two-way function suits a bathroom light switched from both a hallway door and an internal door.
        • Rental and turnover work — a cracked or discoloured mech swaps out without replacing the plate, keeping the point looking right between tenancies.
        • New residential builds — builders and developers specify labelled mechs so handover walkthroughs need no explanation of the switching.
        • Multi-gang labelled plates — the 30BM sits in a mixed bank with other marked and plain 30 Series mechs on a single plate.
        • Renovation switch upgrades — an existing 30 Series plate can take a marked mech during a bathroom refit with no plate change.

        The 30BM is a mechanism only and cannot be installed on its own: a 30 Series plate and grid are needed to complete the switching point. The datasheet specifies no ingress protection rating, so the mechanism is not documented for weather-exposed or damp-exposed positions outside the wall lining. It carries a 10A 250V AC rating and must not be used on circuits above that rating.

        (30BM)

        The word Bath is marked on the rocker surface of the 30BM, identifying which switch feeds the bathroom light. Marking the point removes guesswork on plates carrying several rockers, which is the main reason labelled mechanisms are specified on domestic bathroom and ensuite circuits.

        Installation must be carried out by a licensed electrician. The mechanism mounts flush behind a 30 Series plate on a standard wall box or plaster bracket, and warranty cover is void if the product is not installed by a licensed electrician.

        The 30BM uses the Clipsal 30 Series mechanism footprint, so it fits 30 Series plates and grids. That covers plates from the Clipsal Classic, Clipsal 2000 Series and Clipsal Standard Series ranges. Confirm the plate you are using accepts 30 Series mechanisms before ordering.

        The switch function is two-way, so the mechanism wires as either a one-way point or one end of a two-way pair. That suits a bathroom light switched from a single door or from two separate doorways without changing part numbers.

        The mechanism includes one loop terminal, which lets the active be looped through the point to feed another switch or point on the same circuit. Looping at the mech reduces the number of joins sitting behind the plate.

        Clipsal provides a one-year warranty for domestic use and a one-year warranty for commercial use, starting from the invoice date. Claims are handled under the Clipsal in-home warranty method. Warranty cover is void if the product is not installed by a licensed electrician.

        The Clipsal by Schneider Electric 30BM is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Clipsal in home warranty

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Clipsal by Schneider Electric
        SKU 30BM
        Barcode # 9311554268480
        Package Weight 0.015kg
        TYPE VALUE
        Type Switches
        Brand Clipsal by Schneider Electric
        Range Series 30
        Colour White
        Rated Current (A) 10
        Number of Switches / Gangs 1
        Mounting Flush
        Voltage (V) 250
        Markings BATH

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products