Clipsal Iconic Wiser CLP501902 | Wiser Smart Hub | Zigbee to IP Network
The Clipsal Iconic Wiser CLP501902 is a Zigbee to IP network hub from Clipsal by Schneider Electric, powered by a 5 VDC AC adaptor and certified to Zigbee 3.0. It mounts to the wall or table, connects Wiser Zigbee devices to the Wiser by SE app via Ethernet or Wi-Fi, and enables remote control, automations, and voice integration with Google Home or Amazon Alexa. The hub is the central communication interface required to manage Clipsal Wiser Iconic switches, dimmers, sensors, and other smart home devices.
The CLP501902 is the central unit most often specified for smart home installations, rental management systems, and existing homes being retrofitted with automation. Each Wiser device on the network pairs to the hub over Zigbee, so no hardwired interconnect cable is required between devices. The hub communicates with the mobile app over Ethernet or Wi-Fi, giving homeowners and property managers control from anywhere in Australia or remotely. Because the hub powers up and pairs via the app without complex network configuration, installers can bring a property up to a smart home standard without additional cabling runs or commissioning delays.
For electricians managing multi-property portfolios, the CLP501902 is the foundation SKU that unlocks the whole Clipsal Wiser ecosystem. The hub pairs to Wiser switches, dimmers, sensors, blinds controllers, and IR converters all at once, so a single installer visit can bring multiple rooms or multiple properties online. The 1-year domestic and commercial warranty is supported by Schneider Electric customer care, and the setup is guided by the Wiser by SE app with video support from Clipsal's online resources.
Features
- Zigbee 3.0 certified — connects up to 65 compatible Wiser devices in a single network
- Dual communication interface — Ethernet (10/100 base-T LAN) or Wi-Fi (2.4 GHz 802.11 b/g/n)
- Zigbee 2.4 GHz radio — short-range wireless links to all paired Wiser devices, 2405-2480 MHz
- Wiser by SE app control — create Moments and Automations to run Wiser devices on schedule or by trigger
- Voice control ready — works with Google Home and Amazon Alexa via the Wiser app integration
- Wall or table mount — 86 × 86 × 34 mm, includes wall screws and anchors, or use the optional table stand
- 5 VDC/1.0 A AC adaptor — supplied with micro USB cable and 2-pin terminal block for alternative 12 VDC power
- IP20 rated — indoor use, 0 °C to 40 °C operating temperature
- 1-year domestic and commercial warranty — Schneider Electric support
Where to use the CLP501902
- Smart lighting control — pairs with Clipsal Iconic Wiser switches and dimmers to automate lights, fans, and dimmable loads
- Rental property automation — set up schedules and automations to manage multiple properties from a central app without on-site intervention
- Environmental monitoring and response — pairs with Wiser temperature, humidity, and motion sensors to trigger automations based on room conditions
- Remote access and voice control — enables any homeowner to control their Wiser devices from anywhere via the app, or by voice with Google Home or Alexa
- Retrofits and upgrades — adds smart home capability to existing homes without rewiring; Wiser devices communicate by radio, not hardwired cable
- Integrations and third-party control — the hub can integrate with third-party smart home platforms that support Zigbee or open standards
Verified Sparky Direct customer reviews: Clipsal Iconic Wiser CLP501902 (CLP501902)
"Awesome product. It just works" — Barry
"Easy install, no need to hard wire." — Derrick
"Great hub for Wiser SE app, works very well." — Nick G
