Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our NLS 30086 | Single Weatherproof Switch 20A Double Pole (IP66 Rated) video.

        NLS | WeatherX Weatherproof Switch 20A Double Pole | IP66 Rated

        The NLS 30086 is a single-gang weatherproof switch rated 20A double pole, housed in an IP66 sealed enclosure for outdoor and exposed installations. The 30086 switches both active and neutral conductors at once, which suits it to transportable structures such as caravans and motor homes where double-pole isolation is required. Its UV-stabilised housing carries a 250V AC 50Hz rating and a lockable handle for safe isolation.

        Outdoor isolation points take a beating from sun, rain, and dust, and a standard indoor switch will not last long on an exposed wall. The 30086 seals to IP66, blocking dust ingress and heavy water spray, while the UV-stabilised housing resists fading and embrittlement in full sun. Installers often mount it against corrugated cladding to finish the outside of a shed or pump housing tidily. Multiple conduit entries through the sides and rear let the switch land square no matter how the cable run approaches.

        For sparkies running outdoor power, the 30086 is a low-cost isolation point that holds up where it counts. It is a common shelf item that many electricians reorder by the box, since one weatherproof switch covers air conditioners, pumps, and shed sub-circuits across domestic and light commercial work. The lockable handle takes an 8mm padlock pole in the off position, so it doubles as a lock-off isolator for safe maintenance. At this price point it carries solid margin on a quote without pushing the job cost up.

        Features

        • Double-pole switching — breaks both active and neutral conductors at the same time, which is required for caravans, motor homes, and other transportable structures.
        • IP66 sealed enclosure — fully protected against dust and high-pressure water spray, so the 30086 holds up on exposed outdoor walls.
        • 20A rated current — switches loads up to 20 amps, covering air conditioners, pumps, and outdoor power sub-circuits.
        • UV-stabilised housing — high-impact material resists sun damage and brittleness over years of direct outdoor exposure.
        • Large rotary handle — easy to grip and turn even with gloved hands on a cold or wet jobsite.
        • Padlock facility — accepts an 8mm padlock pole in the off position for safe lock-off during maintenance and service work.
        • Multiple conduit entries — plain entries through the sides and rear of the base, three at 20mm and four at 25mm, suit conduit from any approach.
        • 250V AC 50Hz rating — matched to standard Australian single-phase mains for general outdoor switching duties.
        • Compact single-gang body — measures 97mm high by 82mm wide by 86mm deep, fitting tight mounting positions on sheds and walls.
        • Plastic construction — corrosion-free housing that will not rust like a metal enclosure in coastal or damp settings.
        • Surface-mount enclosure — the 30086 is a self-contained weatherproof box with external conduit entries, not a flush switch for internal wall-cavity mounting.

        Where to use

        • Air conditioner isolation — mounted beside a split-system condenser as the weatherproof isolator used for service and maintenance.
        • Pool and spa pumps — outdoor switching point for pump motors exposed to splash and weather.
        • Shed and workshop supply — the 30086 isolates a sub-circuit feeding a detached shed, garage, or workshop.
        • Caravan and motor home connections — double-pole switching for transportable structures connected to a site supply, as required in Australia.
        • Irrigation and bore pumps — weatherproof control point for rural and garden pump installations.
        • Rooftop and external plant — isolation for exhaust fans, heat pumps, and other roof-mounted or wall-mounted equipment.
        • Coastal and exposed sites — the 30086 suits salt-air and high-exposure locations that need a sealed, corrosion-free switch.

        The 30086 is a switching and isolation device only and provides no circuit protection, so it does not replace a breaker, RCD, or RCBO on the circuit. It is rated to 20 amps maximum and should not be used to switch heavier loads. While sealed to IP66, it is not rated for submersion and must not be installed where it sits underwater.

        Verified Sparky Direct customer reviews: NLS 30086 Single Weatherproof Switch 20A Double Pole (30086)

        "Great product used in conjunction with the corro plates" — Steve

        "Another good nls product. Good quality at a nice price" — Ian

        "Excellent price" — Robin

        (30086)

        Installation of the 30086 must be carried out by a licensed electrician. The switch wires into an outdoor circuit through plain conduit entries on the sides and rear of the base, sized at three 20mm and four 25mm entries to suit most conduit runs.

        A double-pole switch breaks both the active and neutral conductors at once, while a single-pole switch breaks only the active. The 30086 is double pole, which is required in Australia for caravans, motor homes, and other transportable structures connected to a site supply.

        The 30086 works as a weatherproof isolator for split-system air conditioners, pumps, and similar outdoor equipment rated up to 20 amps. The IP66 enclosure and UV-stabilised housing suit it to the exposed wall position next to a condenser unit.

        IP66 means the enclosure is fully protected against dust and resists strong jets of water from any direction. This makes the switch suitable for outdoor walls, sheds, and other exposed locations, though it is not rated for submersion under water.

        The housing is UV-stabilised and made from high-impact material, so it resists fading, brittleness, and cracking under long-term sun exposure. The plastic body is also corrosion-free, which helps in coastal and damp locations where metal enclosures can rust.

        The switch accepts an 8mm padlock pole through its handle in the off position, allowing it to be locked out during service or maintenance work. The large rotary handle is easy to operate by hand, even with gloves on.

        The 30086 carries a one-year warranty for both domestic and commercial use, starting from the invoice date. Claims are handled on a return-to-Sparky Direct basis. The warranty is void if the product is not installed by a licensed electrician.

        The NLS 30086 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand NATIONAL LIGHT SOURCES
        SKU 30086
        Model # 30086NLS
        Barcode # 9336700012113
        Package Weight 0.280kg
        TYPE VALUE
        Type Isolators & Switches Weatherproof
        Brand National Light Sources
        Range WeatherX
        Rated Current (A) 20
        Height (mm) 97
        Width (mm) 82
        Length (mm) 86
        Number of Switches / Gangs 1
        Protection IP66
        Voltage (V) 250
        Material Plastic
        Number of Poles 2

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products