Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our NLS 30539 | Surge Arrestor 1 Pole 20ka 275V | SPD1R video.

        NLS | Surge Arrestor 1 Pole 20kA 275V | SPD1R

        The NLS 30539 is a single-pole surge protection device rated for 20kA nominal discharge current and 275V AC continuous operating voltage. The 30539 mounts on a standard DIN rail inside the switchboard and uses a replaceable wedge module, so the surge cassette can be swapped out without rewiring after it absorbs a transient. It carries a maximum discharge rating of 40kA and a response time of 25 nanoseconds.

        A switchboard without surge protection leaves connected appliances exposed to transients from lightning strikes, grid switching, and nearby electrical faults. Computers, televisions, and fridges on the same board can fail outright, or degrade quietly after repeated low-level surges. The 30539 sits ahead of the protected circuits, giving the board a first line of defence before a transient reaches sensitive equipment. It carries a 20kA nominal discharge rating and a 40kA maximum discharge capacity for larger events.

        Electricians fitting the 30539 get a straightforward retrofit. It clips onto existing DIN rail without extra wiring runs, and the replaceable wedge design turns a future surge event into a quick module swap. It is well priced against comparable single-pole arrestors, which keeps it an easy add-on to a switchboard upgrade or a new-build quote. The red housing makes it simple to identify on a crowded board during fault-finding.

        Features

        • 20kA nominal discharge current (In) — handles the surge currents typically seen from lightning-induced transients on the supply network, tested to the 8/20 microsecond waveform.
        • 40kA maximum discharge current (Imax) — rated to absorb a single larger transient event without failing, giving headroom above the nominal 20kA rating.
        • 275V AC continuous operating voltage — matched to standard Australian single-phase supply, so the device sits permanently connected without nuisance tripping.
        • 25 nanosecond response time — reacts fast enough to clamp a transient before it propagates further into the switchboard and connected circuits.
        • DIN rail mounting — clips directly onto standard 35mm DIN rail alongside circuit breakers and RCDs, with no separate enclosure required.
        • Replaceable wedge module — the surge protection cartridge can be swapped out after it has absorbed a surge, without removing or rewiring the base unit.
        • Single-pole configuration — protects the active conductor on a single-phase circuit, suited to domestic and light commercial switchboards.
        • Operating temperature range minus 40C to 80C — rated for a wide ambient range, suitable for switchboards in roof spaces, garages, and outdoor enclosures.
        • Red housing — visually distinct from standard circuit breakers on a crowded DIN rail, simplifying identification during inspection or fault-finding.
        • Licensed electrician installation only — the manufacturer specifies installation by a qualified electrician only; it is not suited to DIY switchboard work.
        • 12-month warranty — covers manufacturing defects from the date of purchase under the standard NLS warranty terms.

        Where to use

        • Domestic switchboard upgrades — the NLS 30539 adds surge protection to an existing board during a general upgrade or RCBO retrofit.
        • New-build distribution boards — specified at the rough-in stage so the switchboard ships with surge protection already fitted as standard.
        • Home office and entertainment circuits — protects computers, monitors, and home theatre equipment that are costly to replace after a transient event.
        • Rural and regional properties — areas with overhead supply and higher lightning exposure benefit from first-line surge protection at the board.
        • Solar and battery system switchboards — the 30539 adds a layer of transient protection ahead of inverter and battery electronics on the supply side.
        • Rental and caretaker properties — reduces the chance of a single surge event taking out multiple tenant appliances at once.

        The NLS 30539 is not rated for three-phase installations and does not replace a circuit breaker, RCD, or main switch on the board. It must be installed by a licensed electrician and is not a DIY switchboard component.

        Verified Sparky Direct customer reviews: NLS 30539 | Surge Arrestor 1 Pole 20ka 275V | SPD1R (30539)

        "Great product for the price." — Alan

        "Good product at reasonable price" — Tony

        "Ideal for first line of defence for sensitive equipment equipment" — Jim

        (30539)

        Installation of the NLS 30539 must be carried out by a licensed electrician. The manufacturer's documentation specifies professional installation only, and the unit clips onto standard 35mm DIN rail inside the switchboard.

        The NLS 30539 is a single-pole device and is not rated for three-phase protection. It protects the active conductor on a single-phase circuit, suited to domestic and light commercial boards.

        The 30539 uses a replaceable wedge module, so the surge protection cartridge can be swapped out after absorbing a transient. The base unit stays mounted on the DIN rail during the swap.

        The nominal discharge current (In) is 20kA, the rating the device handles repeatedly under typical lightning-induced transients. The maximum discharge current (Imax) is 40kA, the highest single surge the unit can absorb.

        No, the 30539 does not replace a circuit breaker, RCD, or main switch. It works alongside existing circuit protection to clamp transient surges before they reach connected circuits.

        The NLS 30539 carries a 12-month warranty from the date of purchase, covering manufacturing defects. Warranty claims are returned to Sparky Direct for assessment under the standard return process.

        The NLS 30539 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand NATIONAL LIGHT SOURCES
        SKU 30539
        Model # 30539NLS
        Barcode # 9336700011451
        Package Weight 0.134kg
        TYPE VALUE
        Type Surge protection device
        Brand National Light Sources
        Colour Red
        Number of Poles 1
        In (KA) 20
        Imax (KA) 40
        Voltage (V) 275 VAC

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products