Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our NLS 30801 | Weather Protected Appliance Inlet | 3 Round Pins 32amp 500V IP66 (Grey/Orange) video.

        NLS | Weather Protected Appliance Inlet 32A 500V | IP66 3 Round Pin

        The NLS 30801 is a weather protected appliance inlet rated 32A 500V, fitted with three round pins for a single-phase connection into an appliance or enclosure. The 30801 carries an IP66 rating for full protection against dust and water, and it is moulded in high impact polycarbonate measuring 200 x 100 x 170mm. It complies with AS/NZS 60320.1 and comes in a grey housing with a high-visibility orange inlet.

        Outdoor and washdown sites are hard on standard electrical accessories, where dust, rain and hose-down cleaning quickly find their way into unsealed fittings. The NLS 30801 gives a fixed inlet point that stays sealed to an IP66 rating, so power can enter an enclosure or appliance without leaving live pins open to the weather. Its high impact polycarbonate housing handles knocks and UV on exposed walls better than thin moulded plastics.

        For a sparky fitting out a commercial kitchen or a bar, the 30801 lands a tidy, standardised inlet that pairs with any matching three round pin 32A connector on the supply lead. The 32A 500V rating carries heavy appliance loads, and the surface housing fixes to a wall or frame with no flush box to cut in. Stocking the round pin 32A range keeps repeat fit-offs consistent across BBQ areas, cafes and outdoor service benches.

        Features

        • 32A 500V rating — the 30801 carries up to 32 amps at 500 volts, suited to heavy single-phase appliance loads on commercial sites.
        • Three round pin configuration — active, neutral and earth pins give a standard single-phase connection that mates with matching three round pin 32A connectors.
        • IP66 sealing — the housing is fully protected against dust ingress and high-pressure water jets, holding its seal through rain and washdown.
        • High impact polycarbonate body — resists impact and UV on exposed outdoor walls better than standard moulded fittings.
        • Weather protected inlet — the pins sit inside a sealed housing, so power enters an enclosure without leaving contacts open to the weather.
        • AS/NZS 60320.1 compliant — the 30801 meets the Australian and New Zealand standard for appliance couplers.
        • Grey and orange finish — the high-visibility orange inlet flags the connection point against the grey housing on busy sites.
        • Compact 200 x 100 x 170mm footprint — fits walls, frames and equipment bays where space around the connection is tight.
        • Surface-mount housing — the enclosure fixes to a flat surface, with no wall cavity or flush box required.
        • Washdown rated — the IP66 seal suits wet, dusty and hose-cleaned areas that would flood an unsealed outlet.
        • Two-year manufacturer warranty — NLS backs the 30801 against manufacturing defects for two years from purchase.
        • Inlet, not an outlet — the 30801 has fixed male pins to feed equipment, so it is not a socket outlet or an in-line plug.

        Where to use

        • Commercial kitchens — the 30801 supplies power to fixed cooking equipment in wet, high-use kitchen areas that need a sealed connection.
        • BBQ and outdoor cooking areas — the sealed inlet feeds outdoor grills and hotplates exposed to grease, rain and cleaning.
        • Bars and cafes — the 30801 brings power to service benches and equipment in venues washed down at close.
        • Outdoor equipment enclosures — the inlet lands supply into pumps, controls and machinery cabinets mounted outside.
        • Washdown and food processing areas — the IP66 rating suits hose-cleaned zones where standard outlets fail.
        • Event and hospitality sites — the round pin 32A inlet gives a rugged connection point for temporary and semi-permanent setups.
        • Workshops and plant rooms — the 30801 feeds fixed machinery from a sealed wall inlet in dusty industrial spaces.

        The NLS 30801 is not submersible and should not sit under water or take continuous flooding. Its IP66 seal handles dust and high-pressure jets, not immersion, so keep it away from tank interiors and permanently submerged locations. The 30801 is an appliance inlet, not a socket outlet, so it does not replace a general purpose power point.

        Verified Sparky Direct customer reviews: NLS 30801 Weather Protected Appliance Inlet (30801)

        "Sturdy and watertight" — A

        "Heaps cheaper then the big brands and quality seems pretty good." — Leroy

        "Great inlet for the price. Super fast delivery and will be buying again." — Jason

        (30801)

        The NLS 30801 complies with AS/NZS 60320.1, the Australian and New Zealand standard for appliance couplers. It carries an IP66 rating for dust and water protection and is rated 32A at 500V for single-phase appliance supply.

        Installation of the 30801 must be carried out by a licensed electrician. The appliance inlet mounts to a flat wall, frame or enclosure and wires to a suitably rated and protected 32A single-phase circuit.

        A three round pin appliance inlet takes a matching three round pin 32A 500V in-line connector on the supply lead. Match the pin pattern, amperage and IP rating of the connector to the inlet before use.

        An appliance inlet has fixed male pins that feed power into an appliance or enclosure, while a socket outlet has female contacts that accept a plug. The 30801 is an inlet, so it supplies equipment rather than acting as a general power point.

        The appliance inlet is backed by a two-year manufacturer warranty from National Light Sources, covering defects in materials and manufacturing. Keep proof of purchase to support any warranty claim.

        The appliance inlet is rated IP66, which protects against dust and high-pressure water jets but not immersion. Do not submerge it or install it where it will sit under water or take continuous flooding.

        The NLS 30801 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 2 Year
        Commercial Use: 2 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand NATIONAL LIGHT SOURCES
        SKU 30801
        Model # 30801NLS
        Barcode # 9336700016296
        Package Weight 0.836kg
        TYPE VALUE
        Type Industrial Outlets
        Brand National Light Sources
        Colour Grey
        Rated Current (A) 32
        Height (mm) 200
        Width (mm) 100
        Depth (mm) 170
        Protection IP66
        Voltage (V) 500
        Material High Impact Poly Carbonate
        Number of Pins 3

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products