Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Cabac - Digital 2 wire Push Button Digital Dimmer White | HNS610DT video.

        Additional related video.

        CABAC | Digital Push Button Dimmer 2-Wire 350W 240V | White

        The CABAC HNS610DT is a digital push button dimmer and ON/OFF switch in one, rated 240V 50Hz, 350W maximum load, designed to dim dimmable LED and CFL lighting via a simple push button interface. The HNS610DT complies with AS/NZS 60669.2.1 and CISPR15 certification standards and is suitable for most dimmable lights, delivering deep dimming control to zero brightness on most lamps.

        Electricians and renovators installing dimmable downlights in domestic and rental properties frequently encounter lighting control limitations with standard on/off switches. The HNS610DT solves this by delivering variable brightness control without requiring a dedicated dimmer switch refit. A quick tap turns lights ON or OFF at the last set brightness, eliminating the setup friction that frustrates end-users on dimmer retrofits. The rugged design features improved over-current, over-voltage, and over-temperature protection, plus patented ripple tone rejection that eliminates the flicker and hum some dimmers introduce.

        Licensed electricians and builders value the CABAC dimmer range for straightforward installation and solid performance on LED loads where low-cost alternatives often flicker or fail to dim below 10 percent. The HNS610DT suits standard Clipsal, HPM, Voltex, and Trader wall plates without plate modification, speeding up retrofit jobs and reducing installer callbacks. Multiway dimming is available using the optional HNS020RB Remote Button (sold separately), expanding the control flexibility without needing expensive relay-based systems. A convenient dual kit (HNS610DSDK) pairs the dimmer and remote button for properties requiring coordinated switching across multiple zones.

        Features

        • Push button digital dimmer and ON/OFF switch — performs dimming and switching in a single 2-wire mechanism, no additional control wiring required.
        • LED and CFL compatible — specifically designed for dimmable LED loads; delivers deep dimming to zero on most LED and CFL lamps without flickering.
        • Quick tap or long press control — a single tap turns lights ON or OFF at the last set brightness; a long press ramps brightness up or down until the desired level is reached.
        • Timed dimming bonus feature — double tap activates automatic fade: lights gradually dim over 30 minutes before switching off, or gradually brighten to full over 30 minutes when off. LED indicator blinks every 5 seconds during countdown; press and hold for 2 seconds to cancel anytime.
        • Ripple tone rejection technology — patented filtering eliminates the hum and flicker that appear on cheaper digital dimmers when used with LED loads.
        • Over-current, over-voltage, over-temperature protection — rugged design with three-tier protection against electrical damage and thermal runaway, increasing long-term reliability on retrofit jobs.
        • Multiway dimming enabled — optional HNS020RB Remote Button (sold separately) allows dimming from secondary locations on the same lighting circuit without rewiring.
        • Wall plate compatible — fits standard switch mechanisms and plates; no custom mounting or hole boring needed.
        • 240V 50Hz rated — maximum load 350W; minimum load 1W. Maximum current 1.5A. Complies with AS/NZS 60669.2.1 and CISPR15 standards.
        • NOT suitable for fans and motors — the HNS610DT is designed for lighting loads only; do not use with ceiling fan controllers or motor speed controllers, as damage may result.

        Where to use

        • Dimmable downlight retrofits — the HNS610DT is ideal for adding brightness control to existing downlight circuits in kitchens, living rooms, and hallways where standard on/off switches limit user control.
        • Rental property lighting upgrades — landlords upgrading tenant satisfaction often specify dimmer switches for lounge and bedroom lighting; the HNS610DT delivers this without complex installation or high cost.
        • Home renovation projects — builders and electricians commonly install dimmable downlights during renovations; the HNS610DT speeds up the control setup and allows flexibility in dimmer placement without extra wiring.
        • LED downlight installations — new construction and retrofit projects using modern LED downlights need a dimmer that works reliably at low brightness levels; the HNS610DT excels at this task.
        • Entertainment and mood lighting — lounge areas, dining rooms, and bedrooms benefit from the timed dimming feature, which enables gradual fade-out for entertainment or sleep scenarios without manual adjustment.
        • Commercial hospitality lighting — hotels, bars, and restaurants often use dimmer-controlled LED ambiance lighting; the HNS610DT suits these applications where fade-to-zero and low-cost control are priorities.

        The HNS610DT is not suitable for fan controllers, motor speed controllers, or non-dimmable LED fittings. Do not use this dimmer on circuits protected by surge arrestors or on circuits with multiple dimmers. Installation must be carried out by a licensed electrician in compliance with AS/NZS 3000 and AS/NZS 3017.

        Verified Sparky Direct customer reviews: CABAC Digital 2 Wire Push Button Digital Dimmer White (HNS610DT)

        "Solid performance and low dim levels. No flickering like other dimmers!" — Stee V Beat

        "Excellent product works extremely well & easy to use, will purchase more." — Ron

        "Great product with fast postage" — Adrian

        (HNS610DT)

        Yes. The HNS610DT is specifically designed for dimmable LED lighting and delivers deep dimming to zero brightness on most LED lamps. It features patented ripple tone rejection to eliminate flicker that can occur on cheaper digital dimmers when used with LED loads.

        Yes. The HNS610DT suits most dimmable CFL and halogen lamps within the 350W maximum load rating. However, it is specifically optimised for LED dimming, so performance on older lamp types may vary. Check the lamp's dimmer compatibility before purchase if uncertain.

        No. The HNS610DT is NOT suitable for fan controllers or motor speed controllers. It is designed for lighting loads only. Using it on non-lighting loads may cause permanent damage to the dimmer. For fan speed control, use a dedicated fan controller instead.

        Double-tap the HNS610DT button while lights are ON to activate timed dimming. The lights will gradually fade to OFF over 30 minutes. Conversely, double-tap when lights are OFF to gradually brighten to full over 30 minutes. The LED indicator blinks every 5 seconds during the countdown. Press and hold the button for 2 seconds anytime to cancel the timer and return to manual control.

        Yes. The CABAC HNS020RB Remote Button (sold separately) works with the HNS610DT to enable dimming from a secondary location on the same circuit. The dimmer and remote button are also available together in the convenient HNS610DSDK dual switching kit, which is faster than buying and wiring components separately.

        The CABAC HNS610DT is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand CABAC
        SKU HNS610DT
        Barcode # 9318674097532
        Package Weight 0.040kg
        TYPE VALUE
        Type Switches
        Colour White
        Rated Current (A) 1.5
        Voltage (V) 240
        Wattage (W) 350

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        4.0

        1 Reviews
        5 STARS
        0
        4 STARS
        1
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0

        Write a review

        Keith Turner

        push button dimmer on 29 July 2015

        Great product, good price :-)
        Related Category Products