Clipsal by Schneider Electric | Iconic Essence Cover Skin Horizontal Single Socket + Extra Switch | Arctic White Skin Only
The Clipsal E3015XC-AW is an Iconic Essence cover skin for a horizontal single switched socket that also carries an extra switch, finished in Arctic White. It is a skin only (cover frame), so the E3015XC-AW clips over an existing Clipsal Iconic grid and mechanism and does not include the socket itself. The cover frame measures 85mm high by 131mm wide, uses a matt birch timber construction, and is RoHS compliant.
Matching the look of power points and switches across a renovated room often means swapping whole units, which adds cost and rewiring. The Clipsal Iconic Essence range separates the visible cover from the mechanism, so a finish change becomes a clip-on cover swap rather than a full replacement. The E3015XC-AW carries the Arctic White matt skin for a horizontal single socket that also runs an extra switch, keeping the aperture layout consistent across an Iconic install.
Licensed electricians use Iconic Essence skins to offer clients a finish upgrade without touching the wiring, which turns a cosmetic request into a fast, low-risk job. Because the E3015XC-AW clips on over the existing grid, an installer can restyle a switched socket in minutes and keep the same mechanism behind it. Stocking the Arctic White skin alongside standard Iconic covers lets a contractor match varied colour schemes from one base range.
Features
- Skin only cover frame — the E3015XC-AW is a cover on its own and does not include the socket mechanism, so it fits over an existing Clipsal Iconic grid.
- Arctic White finish — the cover frame is finished in Arctic White with a birch edge, giving a consistent matt appearance across an Iconic install.
- Matt surface finish — the matt face holds up against obvious fingerprints and glare better than a gloss cover on wall-mounted sockets.
- Clip-on fixing — the cover clips onto the mechanism grid without tools, allowing a fast fit and easy removal for cleaning or finish changes.
- Horizontal single layout — sized for a single horizontal switched socket that also carries an extra switch, matching a two-rocker aperture.
- Compact dimensions — the E3015XC-AW measures 85mm high, 131mm wide, and 9mm deep, sitting close to the wall once fitted.
- Birch timber construction — the cover frame uses a birch timber body, a change from the standard polymer Iconic skins.
- Iconic platform based — the Essence skin works on the existing Clipsal Iconic platform, so the grid and mechanism behind it stay in place.
- RoHS compliant — the E3015XC-AW meets EU RoHS requirements and is declared free of SVHC substances under REACh.
- Cover only, no mechanism — this skin carries no electrical parts and cannot be used on its own, so a compatible switched socket must already be installed.
- Lightweight component — the cover frame weighs about 30 grams, adding negligible load to the mounted mechanism.
Where to use
- Renovation finish upgrades — the E3015XC-AW refreshes the look of an existing horizontal switched socket without replacing the mechanism behind it.
- Living and bedroom walls — the Arctic White skin suits interior wall sockets where a clean, neutral cover matches painted surfaces.
- Rental and turnover refreshes — a clip-on skin swap restyles tired sockets between tenancies without a full rewire.
- Display homes and staging — matching Iconic Essence covers give a uniform finish across show-home walls.
- Iconic finish matching — the E3015XC-AW lets an installer align one socket cover with the colour scheme used elsewhere in an Iconic install.
- Interior dry areas — the cover suits standard indoor wall locations away from moisture and weather exposure.
The E3015XC-AW is a cover only and is not a working socket on its own, so it must never be treated as a complete power point. It is intended for interior dry locations and is not rated for outdoor, damp, or weatherproof positions such as bathrooms, laundries, or external walls.
