Clipsal by Schneider Electric | Vertical Single Power Point Cover Frame 10A Pro Series | Black Skin Only
The Clipsal P3015VC-BK is a cover frame for a Pro Series single power point, supplied in black. It suits a switched socket with one rocker and one outlet, rated 10A. The P3015VC-BK is a skin only, measuring 116mm high by 78mm wide by 9mm deep.
Socket plates in commercial buildings collect scuffs, marks and overspray long before the mechanism behind them fails. The P3015VC-BK is the cover frame only, so a marked plate comes off and a fresh one clips back on. The frame carries the circuit identification window, so labelling stays with the plate through the swap.
Pro Series is Clipsal's range of switches and sockets built for commercial buildings. The clip-on fixing makes the frame a serviceable part rather than a fixed element of the assembly. Bevelled edges deflect impacts on the plate face, and the plate carries an IK08 impact rating.
Features
- Cover frame only — the socket mechanism and the grid plate are not included, so the existing mech and grid are reused.
- One switch and one socket — the frame carries a single rocker aperture and a single power socket outlet aperture.
- 10A rating — the P3015VC-BK is listed at 10A rated current, matching the switched socket it is made to cover.
- Vertical installation — the installation direction is vertical, with the socket and rocker stacked on the 116mm axis.
- Clip-on fixing — the frame clips into place rather than screwing on, so it comes off and back on as a serviceable part.
- Circuit identification window — a moulded window holds permanent circuit labelling that travels with the plate rather than the wall.
- IK08 impact rating — the P3015VC-BK is listed at IK08 for mechanical impact on the plate face.
- Bevelled edges — the plate edges are bevelled to deflect knocks rather than take them square on.
- Glossy surface finish — the face is finished glossy, which wipes down more easily than a textured surface.
- ABS skin moulding — the skin is moulded in ABS, with polycarbonate used for the window section.
- 9mm plate depth — the frame sits 9mm deep, on a 116mm by 78mm footprint.
- 0 to 45 degrees C operating range — rated for ambient operating temperatures between 0 and 45 degrees C, at 10 to 95 percent relative humidity.
Where to use
- Commercial building fit-outs — Pro Series is designed for commercial buildings, so the P3015VC-BK suits offices, retail and institutional interiors.
- Vertical socket positions — the vertical installation direction suits narrow returns, column faces and positions where a horizontal plate will not sit.
- Replacing marked plates — as a cover frame, the P3015VC-BK refreshes a tired plate face without disturbing the mech or grid behind it.
- High-traffic areas — the IK08 rating suits corridors, back-of-house and public areas where plates take knocks from trolleys and traffic.
- Circuit labelling positions — the identification window suits sockets that need a permanent circuit name rather than a stuck-on label.
The P3015VC-BK is a cover frame only, so the socket mechanism and the grid plate are not supplied with it. It is made for a Pro Series switched socket and will not fit other ranges. Operating range is 0 to 45 degrees C at 10 to 95 percent relative humidity, which rules out hotter or wetter positions.
