Clipsal by Schneider Electric | Pro Series Double Socket Cover Frame Skin Only 10A | Black
The Clipsal Pro Series P3025LC-BK is a cover frame for a double switched socket, in black, supplied as a skin only. The P3025LC-BK is set out for two rockers and two socket outlets at 10 A, and carries no mechanism and no grid plate.
In a commercial building the question at an outlet is which circuit it sits on, and the answer usually ends up on a label that peels. The Pro Series skin carries an integrated circuit identification window, so the labelling sits behind the cover rather than stuck to the front of it. The window is moulded polycarbonate, and the skin around it is ABS plastic.
The P3025LC-BK is a clip-on skin, so the cover comes off and goes back on over the mechanism behind it. Installation direction is horizontal, and the frame measures 78 mm high by 116 mm wide. Depth over the wall face is 9 mm, and the frame weighs 18 g on its own.
Features
- Skin only — the P3025LC-BK is the cover frame alone, with no mechanism and no grid plate in the pack.
- Round earth apertures — the frame is set out for a round earth socket rather than a standard flat pin pattern.
- Two socket outlets — the frame carries openings for two socket outlets.
- Two rockers — the frame is set out for two switch rockers alongside the sockets.
- 10 A rating — the rated current for the P3025LC-BK is 10 A.
- Clip-on fixing — the fixing mode is clip-on, so the frame seats over the assembly behind it.
- Horizontal mount — the installation direction for this frame is horizontal.
- Circuit identification window — the Pro Series skin carries an integrated window for permanent circuit identification.
- ABS skin — the skin is moulded in acrylonitrile butadiene styrene, with a polycarbonate window section.
- Glossy surface finish — the surface finish on the black frame is glossy.
- IK08 impact rating — the P3025LC-BK is listed with IK08 impact protection.
- 18 g net weight — the frame weighs 18 g on its own.
Where to use
- Round earth socket positions — outlets already fitted with a round earth mechanism behind the plate.
- Commercial socket outlets — Pro Series is built for commercial buildings, where the P3025LC-BK matches the rest of the range.
- Circuits needing identification — positions where the outlet has to be labelled and the labelling has to stay put.
- Horizontal double outlets — wall positions running horizontally, matching the installation direction of the frame.
- Marked or scuffed skins — positions where the cover needs changing while the mechanism stays in place.
The P3025LC-BK is a cover frame only and carries no mechanism or grid plate, so it will not work as an outlet on its own. It is cut for a round earth socket, so it will not suit a standard flat pin double GPO, and the mechanism behind it has to match. The frame is horizontal at 78 mm by 116 mm, so a vertical or differently configured position needs a different part. Operation is specified between 0 and 45 degrees C at 10 to 95 per cent relative humidity.
