Search Results:
Search Results:
Search Results:
Search Results:
Learn more by watching our Daikin FTXV35WVMA-KIT | 3.5KW Reverse Cycle Split System Air conditioner R32 video.
The Daikin FTXV35WVMA-KIT is a split system air conditioner providing 3.5kW cooling and 3.7kW heating on 240V single-phase mains. The kit includes an indoor wall-mount unit (FTXV35WVMA) and outdoor condenser (RXV35WVMA) plus all fittings for Australian installation. The FTXV35WVMA runs on R32 refrigerant (66% lower environmental impact than R410A) and holds the Daikin Sensitive Choice endorsement from the National Asthma Council Australia.
Homes and rental properties need reliable cooling and heating across Australia's hot summers and cold winters. The 3.5kW capacity suits single rooms and open-plan living areas (35–45 square metres) where ducted systems don't fit or cost too much. Daikin split systems have proved themselves in Australian homes for over 50 years, trusted by builders and electricians for reliability and spare parts access. The Cora series delivers quiet operation (42 dBA) with inverter efficiency that cuts energy costs, and temperature control precise to 0.5°C.
Licensed electricians choose the FTXV35WVMA for new builds, renovations, and replacements because it delivers reliable heating and cooling without extensive ductwork or multiple units. Inverter boost runs the compressor flat out for 20 minutes when needed, recovering temperature fast on extreme weather days. Coanda airflow pushes conditioned air up along the ceiling for even spread, preventing cold spots and draughts. Precise temperature control (0.5°C steps) and the 2-Area Intelligent Eye prevent overcooling and switch the unit to energy-saving mode when no one is in the room.
The Daikin FTXV35WVMA-KIT is not suitable for outdoor exposure, damp environments (bathrooms without extraction), or locations subject to salt spray or corrosive atmospheric conditions. The outdoor unit requires a solid, level mounting surface with clear airflow in front (minimum 1 metre). Do not install the indoor unit in direct sunlight, behind curtains, or in enclosed cabinets; blocked inlet/outlet reduces cooling and heating performance.
Features:
| INDOOR UNIT | FTXV35WVMA | |
| OUTDOOR UNIT | RXV35WVMA | |
| Rated Capacity | Cool (kW) | 3.5 |
| Heat (kW) | 3.7 | |
| Capacity Range | Cool (kW) | 0.9 - 4.2 |
| Heat (kW) | 0.9 - 5.5 | |
| Indoor Airflow Rate (Hi) | Cool (L/s) | 175 |
| Heat (L/s) | 183 | |
| Indoor Fan Speeds | 5 steps, quiet and automatic | |
| Energy Label / Star Ratings (Hot / Avg / Cold) | Cool | 5 / 4.5 / 5 Stars |
| Heat | 3 / 2.5 / 2.5 Stars | |
| Front Panel Colour | White | |
| Power Supply | 1 Phase, 220-240 V, 50 Hz | |
| Power Input (Rated) | Cool (kW) | 0.81 |
| Heat (kW) | 0.77 | |
| E.E.R./C.O.P. | Cool/Heat | 4.32 / 4.81 |
| TCSPF (Residential) | Hot / Avg / Cold | 6.68 / 6.32 / 6.58 |
| HSPF (Residential) | Hot / Avg / Cold | 4.63 / 4.47 / 4.13 |
| A.E.E.R / A.C.O.P | Cool / Heat | 4.29 / 3.81 |
| Dimensions (HxWxD) | Indoor (mm) | 285 x 770 x 223 |
| Outdoor (mm) | 550 x 675 x 284 | |
| Weight | Indoor (kg) | 9 |
| Outdoor (kg) | 30 | |
| Compressor Type | Hermetically sealed swing type | |
| Refrigerant Type | R32 | |
| Max Pipe Length | (m) | 20 |
| Max Level Difference | (m) | 15 |
| Pipe Sizes | Liquid (mm) | 6.4 |
| Gas (mm) | 9.5 | |
| Outdoor Operating Range (outdoor temp) | Cool (°CDB) | -10 to 46 |
| Heat (°CWB) | -15 to 18 | |
| Indoor Sound Level (H/SL) | Cool (dBA) | 42 / 19 |
| Heat (dBA) | 42 / 20 | |
| Outdoor Sound Level (H/L) | Cool (dBA) | 49 / 44 |
| Heat (dBA) | 49 / 45 | |
| Outdoor EPA Sound Power Level |
Cool (dBA) | 61 |
| Heat (dBA) | 61 | |
(FTXV35WVMA-KIT)
The FTXV35WVMA is rated 3.5kW cooling and 3.7kW heating at standard test conditions (27°C indoor, 35°C outdoor for cooling; 20°C indoor, 7°C outdoor for heating). Output varies between 0.9–4.2kW cooling and 0.9–5.5kW heating depending on outdoor temperature and load. The 20-minute inverter boost function runs the compressor at full high capacity even if already operating flat out, for rapid temperature recovery on extreme days.
Installation must be performed by a licensed electrician certified under the Ozone Protection and Synthetic Greenhouse Gas (Refrigerant) Management Act. Refrigerant handling (charging, leak testing, evacuation), electrical termination (240V wiring to switchboard/RCD), brazing of copper pipe joints, and final commissioning all require professional qualifications. DIY installation voids the 5-year Daikin warranty and breaches Australian electrical standards.
The FTXV35WVMA ships with a wired wall remote and a basic infrared remote for manual operation. Daikin offers an optional WiFi-enabled mobile controller (sold separately) that enables smartphone scheduling and monitoring via the Daikin Comfort Control app. Compatibility with third-party smart home systems (Google Home, Alexa, Apple HomeKit) is not standard but may be achievable through third-party integration gateways—check Daikin Australia for current options.
Running costs depend on electricity rates and cooling/heating load. The FTXV35WVMA has an Energy Efficiency Ratio (EER) of 4.32 for cooling and Coefficient of Performance (COP) of 4.81 for heating, meaning it delivers 4.3 to 4.8 units of cooling or heating energy for every 1 unit of electrical energy consumed. At 20 cents per kWh, full-load cooling costs approximately 19 cents per hour ($4.56 per 24 hours); real-world usage is typically lower (25–50% of full-load hours) depending on outdoor temperature and thermostat setting.
Daikin Australia provides a 5-year parts and labour warranty on the FTXV35WVMA when professionally installed in domestic premises by a licensed electrician. The warranty covers compressor failure, refrigerant leaks, and manufacturing defects. In-home servicing is available through authorized Daikin dealers; you are not required to remove or return the unit. Warranty terms and exclusions apply; contact Daikin Australia or your installer for full warranty documentation.
You can purchase the Daikin FTXV35WVMA-KIT online from Sparky Direct. Delivery is available to select postcodes — just check the product page to see if yours is covered. If your area isn't covered for delivery, click-and-collect from Caboolture, Queensland is available.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from the Invoice Date
5-Year Warranty
The Daikin '5-Year Parts and Labour' warranty applies to all Daikin split, multi-split and ducted air conditioners professionally installed in domestic premises in Australia, so when you choose Daikin, you do so with the confidence of knowing you have many years of worry-free comfort ahead.
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | Daikin |
| SKU | FTXV35WVMA-KIT |
| Package Weight | 0.010kg |
| TYPE | VALUE |
|---|---|
| Type | Air Conditioning |
| Colour | White |
| Complete / Skin Only / Grid Plate Only | Complete |
| Mounting | Wall Mount |
| Voltage (V) | 240 |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.