Search Results:
Search Results:
1 Choose Quantity
2 People Also Bought
500,000+ Orders Delivered FAST!
100-Day Money Back Guarantee
Over 7,581+ 5-Star Google Reviews
Learn more by watching our Fantech EDM-300C | 150mm Wall / Ceiling Mounted Exhaust Fan with Shutters video.
The Fantech EDM-300C is a 150mm wall or ceiling mounted exhaust fan rated 35W at 220-240V, fitted with an integral mechanical backdraft shutter. The EDM-300C moves 78 litres per second of free air and runs at 41 dB(A) measured three metres from the grille. It uses a shaded-pole induction motor with Class B windings, Class II insulation and an IP44 rating. Certificate of Approval number ESV140558 applies to this model.
Bathrooms, ensuites and laundries fitted with a single small extractor frequently remain humid long after the room has been used. The EDM-300C answers that with 78 litres per second of free air through a 150mm spigot, enough to clear steam from a family bathroom rather than recirculate it around the room. Its integral mechanical backdraft shutter closes when the motor stops, so outside air, dust and insects stop tracking back through the duct. The slim line body holds in-wall depth to 104mm, which matters on renovation walls with limited cavity.
Electricians fitting these on domestic installations get a straightforward result: a 148mm spigot, a grille that lifts off for cleaning, and a choice of wall or ceiling position to suit the duct run. One 150mm model covers bathrooms, ensuites, laundries and washrooms, so the van carries one fan instead of three across most wet-area callouts. Ball bearings and fuse-based internal thermal protection reduce the callbacks that accompany fans operating daily for years. A pilot lamp on the grille shows the customer at a glance that the fan is drawing power.
The EDM-300C is not speed controllable, so it must not be wired through a fan speed controller, dimmer or variable-speed switch. It is not rated for installation inside the shower or bath zone, and IP44 does not cover immersion or direct hose spray. Ambient temperature above 40 degrees C sits outside the motor rating.
Verified Sparky Direct customer reviews: Fantech EDM-300C | 150mm Wall / Ceiling Mounted Exhaust Fan with Shutters (EDM-300C)
"Good product, arrived early, sound and safe, easy to install." — Vic
"Works well, as required." — Rohan
"Part was easy to order and arrived promptly." — Ric
(EDM-300C)
Certificate of Approval number ESV140558 applies to this model, which is IP44 rated with Class II insulation. Fantech tests EDM Series airflow to ISO 5801 and noise to BS 848 Part 2. Confirm suitability for the specific installation with the licensed electrician carrying out the work.
A licensed electrician is required, because the fan connects to fixed 220-240V single-phase wiring. The opening takes a 148mm spigot and needs 104mm of cavity depth behind the cover, with total depth of 129mm including the cover. The fan can be mounted in a wall or a ceiling.
The C suffix denotes a unit supplied with an integral mechanical backdraft shutter, while the S suffix denotes the same fan without shutters. The shutter closes when the motor stops, blocking outside air, dust and insects from passing back through the duct into the room.
The fan moves 78 litres per second (280 m3/h) of free air at 2200 rpm, measured at 41 dB(A) three metres from the grille. Airflow drops once duct and fittings are added, so allow for pressure losses in the duct run when sizing the installation.
The grille lifts off the body for cleaning, so the grille and blade can be wiped down. Lint and dust cut airflow over time, and a clean every few months holds extraction at rated levels. The ball-bearing motor needs no lubrication.
Two years for domestic use and two years for commercial use, starting from the invoice date. The warranty method is return to Sparky Direct. Warranties are void where the fan has not been installed by a licensed electrician.
The EDM-300C uses a shaded-pole induction motor that is not speed controllable, so a fan speed controller, dimmer or variable-speed switch must not be fitted. Switch the fan through a standard switch, or through a run-on timer rated for the load.
The Fantech EDM-300C is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 2 Year
Commercial Use: 2 Year
Warranty Method: Return to Sparky Direct
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | Fantech |
| SKU | EDM-300C |
| Barcode # | 8413893101976 |
| Package Weight | 1.170kg |
| TYPE | VALUE |
|---|---|
| Type | Exhaust Fan |
| Brand | Fantech |
| Rated Current (A) | 0.21 |
| Height (mm) | 200 |
| Depth (mm) | 129 |
| Mounting | Wall or Ceiling |
| Voltage (V) | 220-240 |
| Wattage (W) | 35 |
| Diameter (mm) | 148 |
| IP Rating | IP44 |
| Duct Size | 150mm |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.
$94.55 $85.95 ex. GST
$152.90 $139.00 ex. GST
$306.21 $278.37 ex. GST
$230.94 $209.95 ex. GST
$413.01 $375.46 ex. GST
$256.25 $232.95 ex. GST
$219.94 $199.95 ex. GST
$203.44 $184.95 ex. GST
