Search Results:
Search Results:
Search Results:
Search Results:
The Fujitsu ASTG30KMTD is a wall mounted reverse cycle split system air conditioner rated 8.5kW cooling and 9.0kW heating, charged with R32 refrigerant. The ASTG30KMTD is the indoor head, matched to the AOTG30KMTD outdoor unit and run from a 230V single phase 50Hz supply. It sits in the Fujitsu Lifestyle range and carries a 5 year parts and labour manufacturer warranty.
Open-plan living areas and large main bedrooms overwhelm a 5kW head, which then sits at full fan all afternoon trying to hold setpoint. The ASTG30KMTD answers that with 8.5kW rated cooling and 9.0kW rated heating, delivered through inverter compressor modulation rather than a fixed speed motor. Householders extending reverse cycle coverage to a second or third room usually want the same brand, so the remote and menus stay familiar. The 75 metre maximum pipe run and 30 metre height difference also give the installer room to place the outdoor unit clear of bedroom windows.
Fujitsu Lifestyle heads keep installers on familiar ground: the same wireless controller, the same louvre behaviour, and the same commissioning sequence across the range. A second or third unit in the same house goes in without complication, and handover takes minutes because the occupant already understands the remote. The ASTG30KMTD draws 10.4 amps running in cooling and lists a 17 amp maximum operating current, so it terminates on a dedicated circuit with a 20 amp recommended breaker. Quoting one manufacturer across an entire house also simplifies spares and subsequent service.
The ASTG30KMTD indoor head is built for interior wall mounting and is not rated for outdoor or exposed positions. It is not a self-contained or plug-in unit, and only operates paired with its matched outdoor unit on a correctly sized, evacuated pipe run. The system carries R32 refrigerant, so installation and service are restricted to licensed refrigerant handlers and licensed electricians.
| Indoor unit | ASTG30KMTD |
| Outdoor unit | AOTG30KMTD |
| Operation Type | Reverse Cycle |
| Power Source V/Ph/Hz | 230 / 1 / 50 |
| Cooling Capacity kW (Rated (Min - Max)) | 8.50 (2.9 - 10.5) |
| Heating Capacity kW (Rated (Min - Max)) | 9.00 (2.2 - 11.2) |
| Input Power Cooling kW (Rated (Min - Max)) | 2.46 (0.58 - 3.85) |
| Input Power Heating kW (Rated (Min - Max)) | 2.34 (0.5 - 4.01) |
| EER Cooling kW/kW | 3.45 |
| COP Heating kW/kW | 3.84 |
| Star Rating Cooling (0-10) (Hot / Average / Cold) | 3 / 2.5 / 2.5 |
| Star Rating Heating (0-10) (Hot / Average / Cold) | 2.5 / 2 / 2 |
| Total Cooling Seasonal Performance Factor Residential kW (Hot / Average / Cold) | 4.658 / 4.334 / 4.477 |
| Heating Seasonal Performance Factor Residential kW (Hot / Average / Cold) | 4.111 / 3.856 / 3.546 |
| Total Cooling Seasonal Performance Factor Commercial kW (Hot / Average / Cold) | 5.097 / 5.258 / 5.782 |
| Heating Seasonal Performance Factor Commercial kW (Hot / Average / Cold) | 4.1 / 3.939 / 3.678 |
| Running Current amps (Cooling / Heating) | 10.4 / 10.1 |
| Moisture Removal l/hr | 2.5 |
| Indoor Sound Pressure Cooling dBA (High / Quiet) | 51 / 33 |
| Indoor Sound Pressure Heating dBA (High / Quiet) | 51 / 33 |
| Outdoor Sound Pressure dBA (Cooling / Heating) | 50 / 54 |
| Outdoor Sound Power dBA | 66 |
| Air Circulation (Indoor - High Fan) Cooling l/sec | 389 |
| Air Circulation (Indoor - High Fan) Heating l/sec | 389 |
| Indoor Unit Dimensions mm (Height x Width x Depth) | 340 x 1150 x 280 |
| Indoor Unit Weight kg | 18.50 |
| Outdoor Unit Dimensions mm (Height x Width x Depth) | 830 x 900 x 330 |
| Outdoor Unit Weight kg | 60.00 |
| Piping Connects mm Ø (Liquid / Gas) | 9.52 / 15.88 |
| Pipe Length m (Max (Precharged)) | 75 (20) |
| Max Height Difference m | 30 |
| Operation Range Cooling °CDB (Min to Max) | -10 to 46 |
| Operation Range Heating °CDB (Min to Max) | -15 to 24 |
| Refrigerant Type | R32 |
| Refrigerant Amount g | 1,650 |
Verified Sparky Direct customer reviews: FUJITSU ASTG30KMTD 8.5KW Reverse Cycle Split System Airconditioner R32 Lifestyle Range (ASTG30KMTD)
"Excellent product. The fourth Fujitsu aircon in our house." — Chubby
"Purchase and delivery of our split system were simple and straightforward." — Ken
"Wont deal with the big retailers ever again, these guys are the real deal." — Scott
(ASTG30KMTD)
The ASTG30KMTD runs on a 230V single phase 50Hz supply. Running current is 10.4 amps in cooling and 10.1 amps in heating, with a maximum operating current of 17 amps. Fujitsu lists a 20 amp recommended breaker size for this model.
Installation is restricted to suitably qualified trades. The system carries R32 refrigerant, so a licensed refrigerant handler must connect, evacuate and commission the pipework, and a licensed electrician must run and terminate the supply circuit. Warranty is void if the unit is not installed by a licensed installer.
An 8.5kW head is sized for large spaces such as open-plan living, dining and kitchen zones, or a large main bedroom. Cooling output modulates between 2.9kW and 10.5kW, so the system settles to low output once the room reaches setpoint. Final room sizing should be confirmed by the installer.
The ASTG30KMTD indoor head is matched to the AOTG30KMTD outdoor unit, and the two work as one system. Connection pipe diameters are 9.52mm liquid and 15.88mm gas. Maximum pipe length is 75 metres with 20 metres precharged, and maximum height difference between the units is 30 metres.
Fujitsu provides a 5 year parts and labour warranty across the Lifestyle range. Cover starts from the invoice date and is void if the unit is not installed by a licensed installer. Fujitsu General Assist handles service through its own technicians and dedicated service agents around Australia.
The human sensor detects movement of people in the conditioned room. If no movement is detected for 20 minutes, the unit switches to energy saving operation and adjusts temperature to cut consumption. It returns to the previous setting once movement in the room is picked up again.
Dust on the indoor panel wipes off with a damp cloth, and the apple catechin filter and long-life ion deodorising filter are washable. A filter sign on the indoor unit can be set to a reminder interval matched to the estimated amount of dust in the room air.
Outdoor operating range is minus 10 to 46 degrees Celsius dry bulb in cooling, and minus 15 to 24 degrees Celsius dry bulb in heating. Output falls away toward the extremes of those ranges. Blue fin treatment on the outdoor coil slows corrosion in coastal locations.
You can purchase the Fujitsu ASTG30KMTD online from Sparky Direct. Delivery is available to select postcodes — just check the product page to see if yours is covered. If your area isn't covered for delivery, click-and-collect from Caboolture, Queensland is available.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
5 Year Manufactures Warranty
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | Fujitsu Air Conditioners |
| SKU | ASTG30KMTD |
| Package Weight | 0.010kg |
| TYPE | VALUE |
|---|---|
| Type | Air Conditioning |
| Brand | Fujitsu |
| Height (mm) | 340 |
| Width (mm) | 1150 |
| Depth (mm) | 280 |
| Mounting | Wall Mount |
| Voltage (V) | 230 |
| Product Type | Split System Air Conditioning |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.