Skip to main content
Get FREE SHIPPING, BUGLE SCREW BOX and $35 PREZZEE when you shop Clipsal this September! Learn More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Major Tech PIR33 | 360° Indoor PIR Motion Sensor Ceiling Mount | IP20 video.

        Major Tech | 360 Degree Ceiling PIR Motion Sensor 220-240V AC | IP20 Indoor

        The Major Tech PIR33 is a 360 degree ceiling-mounted PIR motion sensor rated 220 to 240V AC, for indoor use at IP20. It switches lights or another connected load when it picks up movement and body heat within 6 metres. The PIR33 carries an adjustable lux threshold from under 3 up to 2000 lux and a time delay from 10 seconds to 15 minutes. It is built to AS/NZS 60669.1 and AS/NZS 60669.2.1.

        A light left running in an empty corridor or store room draws power for nothing. The PIR33 switches the circuit when movement is detected and drops it again after the set delay. The lux threshold holds the sensor off while there is enough daylight in the space, down to a setting of 3 lux. Every fresh detection restarts the delay, so the light stays on while the space is in use.

        The PIR33 lands in a 64mm ceiling cut-out and wires to a terminal block on the base. The fixing bracket unscrews from the base, so it screws to the ceiling before the sensor goes back on. Several sensors can be wired on the same lighting circuit where one unit will not cover the run. Both the time and lux settings are knob adjustments on the unit, so commissioning is done at the ceiling on install.

        Features

        • 360 degree coverage — the ceiling position gives an even detection field all around the sensor rather than one facing direction.
        • 6 metre detection distance — the PIR33 picks up movement out to 6 metres from the sensor body.
        • Adjustable lux threshold — the LUX knob sets the trigger point anywhere from under 3 lux up to 2000 lux.
        • 10 seconds to 15 minutes — the time delay sets how long the load stays on after the last detection.
        • Six timer steps — the delay steps through 10 seconds, 30 seconds, 90 seconds, 3 minutes, 7 minutes and 15 minutes.
        • 600W LED rated load — the PIR33 switches up to 600W of LED or CFL, or 1200W of incandescent.
        • Under 0.9W draw — the sensor itself consumes less than 0.9W while powered and waiting for detection.
        • IP20 indoor only — the PIR33 carries no weather rating and is intended for indoor installation.
        • AS/NZS 60669 compliance — built to AS/NZS 60669.1 and 60669.2.1, and to IEC 60669-1 and 60669-2-1.
        • 30 second warm-up — the sensor takes 30 seconds after power-up before it starts responding to movement.
        • Retriggering delay — movement detected while the load is on restarts the countdown from that moment.
        • Five year warranty — Major Tech covers the PIR33 for five years from the invoice date.

        Where to use

        • Corridors and hallways — the 360 degree field suits a central ceiling position where people approach from both directions.
        • Standard ceiling heights — the PIR33 is set up for ceilings between 2.2 and 4 metres.
        • LED lighting circuits — 600W of LED or CFL covers most common-area lighting runs on one sensor.
        • Rooms with daylight — the lux setting holds the lights off in a space that already has enough natural light.
        • Long runs and large rooms — several PIR33 units wire onto one circuit where a single sensor will not cover the area.
        • Store rooms and cupboards — a short timer step suits spaces entered briefly, where a long run-on wastes power.
        • New builds and retrofits — the 64mm cut-out drops into plasterboard on a new fit-off or an existing ceiling.

        The PIR33 is rated IP20 and is not suitable outdoors or in wet and damp locations. Do not mount it near heating vents, air conditioning outlets or light fittings, and keep it clear of mirrors and other highly reflective surfaces. Curtains and tall plants that move in a draught can also trigger it, and the sensor will not detect through glass or walls.

        (PIR33)

        Installation must be carried out by a licensed electrician. The sensor wires to 220 to 240V AC through a terminal block in its base and drops into a 64mm ceiling cut-out, with the fixing bracket screwed to the ceiling first. Warranty is void if a licensed electrician does not install it.

        Up to 600W of LED or CFL lighting, or 1200W of incandescent. The sensor itself draws under 0.9W while powered. Add up the total connected load against those figures before wiring more than one fitting through the one sensor.

        The LUX knob sets the ambient light level at which the sensor operates, from under 3 lux up to 2000 lux. The TIME knob sets the run-on delay through six steps: 10 seconds, 30 seconds, 90 seconds, 3 minutes, 7 minutes and 15 minutes.

        Detection covers a full 360 degrees around the sensor out to 6 metres, for movement between 0.6 and 1.5 metres per second. Walking straight at the sensor can be missed, because a passive infrared unit reads movement crossing its beams rather than travelling along them.

        The IP20 rating is for indoor use, so outdoor and damp locations are out. Keep it clear of heating vents, air conditioning outlets and light fittings, away from mirrors and reflective surfaces, and away from curtains or tall plants that move in a draught.

        The sensor is built to AS/NZS 60669.1 and AS/NZS 60669.2.1, and to the equivalent IEC 60669-1 and IEC 60669-2-1. Supply is 220 to 240V AC at 50 or 60Hz, and the working temperature range runs from -20 to 40 degrees Celsius.

        Major Tech covers the PIR33 for five years, starting from the invoice date, with return to Sparky Direct as the warranty method. A 100 day money back guarantee also applies to unused items returned complete, in original packaging, with proof of purchase.

        The Major Tech PIR33 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        5 Years Limited Warranty
        Warranty Method: Return to Sparky Direct

        Specification Details
        Function 360°
        Detection Distance 2m – 16m (Adjustable) <24°C
        Detection Motion Speed 0.6 to 1.5 m/s
        HF System 5.8GHz CW Radar, ISM Band
        Ambient Light <3 to 2000 Lux (Adjustable)
        Installation Height 1.5m – 3.5m
        Voltage 220 to 240V AC
        Power Frequency 50/60Hz
        Rated Load Incandescent: 1200W
        LED / CFL: 300W
        Time Delay 10 sec (±3 sec) to 12 min (±1 min)
        Power Consumption <0.9W
        Mounting Ceiling Mount
        Working Temperature -20°C to 40°C
        Working Humidity <93% RH
        IP Rating IP20 (Indoor installation)
        Standards IEC 60669-1 / 60669-2-1
        AS/NZS 60669.1 / 60669.2.1

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Major Tech
        SKU PIR33
        Model # PIR33
        Barcode # 6008229019470
        Package Weight 0.125kg
        TYPE VALUE
        Type Sensor
        Brand Major Tech
        Mounting Ceiling Mount
        Voltage (V) 220 to 240V AC
        IP Rating IP20
        Time Delay 10 sec (±3 sec) to 15 min (±2 min)
        Cut Out ø Ø64mm
        Detection Distance 6M Max
        Installation Height 2.2m - 4m
        Detection Area 360°
        Detection Motion Speed 0.6 to 1.5m/s
        Ambient Light <3 to 2000 Lux (Adjustable)

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products