Matchmaster | Hidden Media Hub Recessed AV Wall Box 70mm | Paintable Lid
The Matchmaster 04MM-HMH01 is a recessed media hub that houses AV and power outlets behind a wall-mounted flat-screen television. The 04MM-HMH01 mounts into a wall cavity with a minimum depth of 70mm and holds up to five Australian standard faceplates. Its paintable lid sits flush with the wall and can be finished to match the surrounding surface. Internal dimensions are 285 x 250 x 70mm, with a 274 x 238mm wall cutout.
A wall-mounted television leaves power and signal cabling exposed along the plasterboard behind the screen. The 04MM-HMH01 recesses the GPO, HDMI, and data mechanisms into the wall cavity, so the cabling is routed out of view and every connection sits at a single accessible point. The enclosure has space for AC adaptors that feed streaming devices and media players, plus a compact network switch. A paintable lid finishes flush with the wall and blends into the existing decor.
For installers, the 04MM-HMH01 turns a messy cabling task into a neat, finished result on new builds and renovations. Its shallow 70mm depth suits standard plasterboard walls without requiring a deep cavity. A single enclosure carries up to five faceplates, grouping power, television, and data outlets behind the screen. Painting the lid to the wall colour then leaves a tidy, decor-matched finish.
Features
- Recessed AV housing — the 04MM-HMH01 sits inside the wall cavity to keep power and signal outlets behind a wall-mounted flat-screen television.
- Shallow wall depth — mounts in a wall with a minimum depth of 70mm, so it suits standard plasterboard construction.
- Five faceplate capacity — the internal opening holds up to five Australian standard faceplates on a single recessed plate.
- Paintable lid — the cover can be painted to match the surrounding wall and closes flush over the opening.
- Converter space — has room for inline signal converters such as an HDMI converter or a modulator alongside the outlets.
- Adaptor storage — leaves space for AC adaptors powering a streaming stick or media player inside the cavity.
- Internal dimensions — measures 285 x 250 x 70mm internally, with a 274 x 238mm wall cutout.
- New and existing builds — the 04MM-HMH01 is designed for both new construction and retrofit into finished walls.
- Residential and commercial use — rated by the manufacturer for both home and commercial building installations.
- Australian Design Registration — carries Australian Design Registration numbers 355507 and 355508.
- No electrical rating of its own — the hub is a cable and outlet enclosure, not a powered device, and carries no voltage or current rating.
- Faceplates not included — supplied as the recessed box and lid only, with outlets and plates fitted separately.
Where to use
- Wall-mounted TV installs — the 04MM-HMH01 sits behind a flush-mounted flat-screen to keep the outlets and cables hidden.
- Home theatre setups — houses HDMI, power, and data outlets for a lounge or media room screen.
- Renovations and retrofits — drops into finished plasterboard walls during a media upgrade without a deep cavity.
- New build pre-wire — specified at rough-in so the media wall is ready for a screen at handover.
- Corner and swing-out mounts — provides cable slack and outlet access for articulated or corner TV brackets.
- Streaming and console zones — stores adaptors for a streaming stick, console, or media player behind the screen.
- Residential and commercial fit-outs — the 04MM-HMH01 suits homes, offices, meeting rooms, and display areas alike.
The 04MM-HMH01 is an indoor cable and outlet enclosure. It is not weatherproof and is not rated for outdoor, wet, or exposed locations. The hub houses outlets and cables only, and any mains outlet fitted inside it must be installed by a licensed electrician.
Verified Sparky Direct customer reviews: Hidden Media Hub (04MM-HMH01)
"Good size, easy install." — Dave
"Worked a treat concealing all my unsightly cables for my television and PowerPoints." — Simon