Robus | Duke2 LED Batten 1250mm 16/25/32/40W CCT Selectable | White IP20
The Robus RDKX12CCT3-01 is a 1250mm LED batten luminaire from the Duke2 range, rated IP20 for indoor use. The RDKX12CCT3-01 offers four selectable wattages of 16W, 25W, 32W and 40W and three selectable colour temperatures of 3000K, 4000K and 6500K. It runs on a 220-240V 50/60Hz supply, is non-dimmable, and is a Class I fitting supplied in white.
A failed fluorescent batten leaves a fixed mounting position and supply cables already in place. The RDKX12CCT3-01 is an LED replacement for 2x36W fluorescent battens and covers that same position. Its wattage and colour temperature are set on the fitting, not fixed at the point of order.
Both settings sit inside the fitting: a DIP switch on the driver sets the wattage, and a switch on the metal tray sets the colour temperature. Both are reached before the diffuser goes back on. Large terminals take loop-in and loop-out conductors, and the fitting can be switched by PIR, microwave or photocell.
Features
- Four selectable wattages — the RDKX12CCT3-01 can be set to 16W, 25W, 32W or 40W to suit the lighting level required.
- Three colour temperatures — 3000K warm white, 4000K neutral white and 6500K cool white are selectable on the same fitting.
- Efficacy of 119 to 135 lm/W — output per watt sits in this band across the wattage and colour temperature settings.
- IK08 impact rating — the housing withstands impact energy to IK08, which suits positions where knocks are likely.
- Pressed steel housing — the body is formed pressed steel rather than moulded plastic.
- Polycarbonate diffuser and end caps — the light-transmitting diffuser and both end caps are polycarbonate.
- 50,000 hour rated life — the LED array is rated to L70B50 at 50,000 hours of operation.
- Low flicker driver — the driver is a low flicker type, which keeps the output steady across the wattage settings.
- Non-dimmable operation — the RDKX12CCT3-01 is non-dimmable, so the circuit feeding it is switched rather than dimmed.
- IP20 ingress rating — the fitting is rated IP20, which covers dry indoor positions only and offers no water protection.
- Ambient operating range — the fitting is rated from -20 degrees C to +40 degrees C.
- Emergency pack compatible — a separate emergency pack with LiFePO4 battery technology is available as an accessory for this fitting.
Where to use
- Garages and home workshops — the 1250mm RDKX12CCT3-01 covers a bench run and can be set to 40W where a bright working light is wanted.
- Fluorescent batten retrofits — the fitting replaces a 2x36W fluorescent batten on an existing mounting position and supply.
- Storerooms and back-of-house corridors — the colour temperature can be set to match the fittings already installed in adjoining spaces.
- Switchboard and meter rooms — the IK08 housing handles the knocks that come with tight, trafficked service spaces.
- Commercial fit-outs — the RDKX12CCT3-01 lets the lighting level be set on site when the final wattage is confirmed late in the job.
- Sensor-switched lighting — the fitting is suitable for switching by PIR, microwave or photocell control.
- Emergency lighting positions — a separate emergency pack can be fitted to give the RDKX12CCT3-01 a 90 minute emergency duration.
The RDKX12CCT3-01 is rated IP20 and is not suitable for outdoor use, damp or washdown areas, or any position exposed to weather. It is not dimmable, so it should not be wired to a dimmer circuit. Ambient temperature above +40 degrees C sits outside the rated operating range.
Verified Sparky Direct customer reviews: Robus RDKX12CCT3-01 | Batten LED 1250MM 16/25/32/40W IP20 (RDKX12CCT3-01)
"Great light. Easy installation." — Brizza
"Received the Robus Batten LED super quick, well packaged and were easily installed" — Happy
"Light been installed and running well" — Pete
