Robus | Speedbeam Express LED Batten 17/22/28/34W Tri-CCT | IP20 IK06
The Robus RSBEX12CCT3-01 is a 1230mm surface-mounted LED batten with four selectable wattages and three selectable colour temperatures. The driver sets the output to 17W, 22W, 28W or 34W, and the colour to 3000K, 4000K or 5700K. The RSBEX12CCT3-01 is rated IP20 and IK06, runs on 220-240V, and delivers 2520 to 4610 lumens.
A batten run through a building rarely needs the same output in every room. A store room, a corridor and a work bay each call for a different wattage and a different light colour. The RSBEX12CCT3-01 carries four wattages and three CCTs in one fitting, selected on the driver at install. The factory setting of 4000K at 34W holds the top output position with no adjustment.
The two-part construction separates the base from the optical unit, so the base is fixed and terminated on its own. Screw-less end caps leave no cap fasteners to undo at fit-off, and the base takes 20mm conduit entry with BESA box mounting. Robus states that this construction makes wiring and installation simpler and faster.
Features
- Four selectable wattages — DIP switches on the driver set the RSBEX12CCT3-01 to 17W, 22W, 28W or 34W.
- Tri-CCT selection — colour temperature is selectable at 3000K warm white, 4000K neutral white or 5700K cool white.
- 2520 to 4610 lumens — output steps through 2520lm, 3190lm, 4010lm and 4610lm as the wattage setting rises.
- Efficacy to 144 lm/cctW — the fitting measures 143, 144, 142 and 140 lm/cctW across its four wattage settings.
- T8 comparability — Robus rates the RSBEX12CCT3-01 as comparable to a 1 to 4 lamp 36W T8 fluorescent batten.
- Two-part construction — the optical assembly separates from the base, so the base is fixed and wired before the optics refit.
- Screw-less end caps — the polycarbonate end caps fit at either end of the body without screws.
- IK06 impact rating — the pressed steel housing and polycarbonate diffuser give the fitting an IK06 impact protection rating.
- Emergency pack base — the fitting carries an emergency pack base, so it can be converted to emergency operation with a plug-in pack.
- 20mm conduit entry — the body suits 20mm conduit entry on surface-mounted runs.
- 50,000 hour rated life — Robus rates the Speedbeam Express at 50,000 hours.
- Non-dimmable operation — the Speedbeam Express is non-dimmable and holds a fixed output at the selected wattage.
Where to use
- T8 batten changeouts — the RSBEX12CCT3-01 goes in where a 36W T8 fluorescent batten is coming out.
- Storage and racking aisles — the 4610lm setting puts high output over deep racking from one run of fittings.
- Multi-area fitouts — one fitting type covers several areas because the wattage is set unit by unit on the driver.
- Retail and display areas — colour temperature is set to 3000K, 4000K or 5700K to match the fitout on the floor.
- Exposed conduit runs — the RSBEX12CCT3-01 suits BESA box mounting where wiring is run on the surface.
- Workshops and service corridors — the IK06 body is rated for the light knocks these positions see.
- Four-foot batten positions — the RSBEX12CCT3-01 measures 1230mm long, matching the four-foot batten format.
- Unheated indoor storage — the operating range of minus 20 to plus 40 degrees Celsius covers interiors that are not climate controlled.
The RSBEX12CCT3-01 is rated IP20 and is for indoor use only, with no protection against water ingress. Do not install it outdoors or in damp or wet areas, including bathrooms, laundries and washdown positions. The fitting is non-dimmable, so it is not suited to a dimmed circuit, and it has no user serviceable parts.
