Robus | Speedbeam Slim LED Batten 22/27/33/38W Tri-CCT | IP20 IK04
The Robus RSBSX12CCT3-01 is a 1170mm surface-mounted LED batten with four selectable wattages and three selectable colour temperatures. The driver sets the wattage to 22W, 27W, 33W, or 38W, and the colour temperature to 3000K, 4000K, or 5700K. The RSBSX12CCT3-01 is rated IP20 and IK04, runs on 220-240V, and delivers 3250 to 5250 lumens.
A batten run through a building does not always need the same output in every room. A store room, a corridor and a work bay each call for a different wattage and a different light colour. The RSBSX12CCT3-01 carries four wattages and three CCTs in one fitting, selected on the driver with the diffuser off. The factory setting of 4000K at 38W covers the highest output position without adjustment.
Robus rates the Speedbeam Slim as comparable to a 1x or 2x36W T8 batten, which puts both fluorescent formats on one part number. The quick-release two-part body separates so you can fix and terminate the base before clipping the optical unit back on. Screw-less end caps leave no cap fasteners to remove at fit-off. Multiple BESA points accept 20mm conduit entry on surface-mounted runs.
Features
- Four selectable wattages — a DIP switch on the driver sets the RSBSX12CCT3-01 to 22W, 27W, 33W or 38W.
- Tri-CCT selection — colour temperature is selectable at 3000K warm white, 4000K neutral white or 5700K cool white.
- 3250 to 5250 lumens — output steps through 3250lm, 3980lm, 4660lm and 5250lm as the wattage setting rises.
- Efficacy to 154 lm/W — the fitting measures 154, 152, 149 and 146 lm/cctW across its four wattage settings.
- T8 comparability — Robus rates the RSBSX12CCT3-01 as comparable to a 1x or 2x36W T8 fluorescent batten.
- Quick-release two-part body — the optical assembly unclips from the base, so the base can be fixed and wired on its own.
- Multiple BESA points — the base carries several BESA fixing points and takes 20mm conduit entry.
- Screw-less end caps — the polycarbonate end caps fit without screws at either end of the body.
- Powder-coated steel base — the base is pressed steel with a powder-coated finish.
- 50,000 hour rated life — Robus rates the fitting to L70B50 at 50,000 hours.
- Non-dimmable operation — the Speedbeam Slim is non-dimmable and holds a fixed output at the selected wattage.
- IP20 rating — the IP20 rating covers dry interior positions and gives no protection against water ingress.
Where to use
- T8 batten changeouts — the RSBSX12CCT3-01 goes in where a 1x or 2x36W T8 fluorescent batten is coming out.
- Storage and racking aisles — the 5250lm setting puts high output over deep racking from a single run of fittings.
- Multi-area fitouts — one fitting type covers several areas because the wattage setting is changed unit by unit.
- Retail and display areas — colour temperature is set to 3000K, 4000K or 5700K to match the fitout on the floor.
- Exposed-ceiling conduit runs — the BESA points take 20mm conduit where the wiring is run on the surface.
- Service corridors and plant rooms — the IK04 body is rated for the light knocks these positions see.
- 1200mm ceiling modules — the 1170mm body suits ceiling runs set out on a 1200mm module.
- Unheated indoor storage — the operating range of -20 to +40 degrees Celsius covers interiors that are not climate controlled.
The RSBSX12CCT3-01 is rated IP20 and is for indoor use only, with no protection against water ingress. Do not install it outdoors or in damp or wet areas, including bathrooms, laundries and washdown positions. The luminaire is non-dimmable and is not for use on a dimmer, and it has no user serviceable parts.
