Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        NLS | Diffused LED Batten 40W 1200mm Platinum Series | Tri-Colour White IP20

        The NLS 20400 is a 1200mm 40W tri-colour LED batten rated IP20 for dry indoor use, finished with a diffused lens that distributes even, low-glare illumination. A built-in 3CCT switch lets the installer select a 3000K, 4000K, or 6000K colour temperature, so the 20400 suits both task and ambient applications. Operating on 220-240V AC, the batten delivers a rated 4400 lumen output at a measured efficiency of 120 lumens per watt. Installation must be completed by a licensed electrician in accordance with AS/NZS 60598.

        Ageing fluorescent battens strike slowly, discolour over time, and eventually fail at either the tube or the starter. In garages, sheds, and workshops, that leaves dim, uneven light and recurring maintenance callbacks. The NLS 20400 replaces a complete fluorescent batten with a single sealed LED unit that reaches full brightness the instant the circuit is energised. Its diffused lens distributes even, low-glare illumination, while the 4400 lumen output covers a 1200mm fitting line without noticeable dark patches.

        For shed, garage, and commercial fit-outs, the 20400 fits off fast. The housing lands flat on a ceiling or wall through a central cable entry and an integrated terminal block, leaving no separate driver to mount. Because the 3CCT switch sets warm, neutral, or cool white on site, one part number satisfies every colour requirement and reduces the range an electrician carries on the van. Priced low for a 4400 lumen fitting, the 20400 also supports solid margin across bulk lighting runs that specify eight or more battens.

        Features

        • 40W tri-colour batten — the 20400 draws 40W and delivers a rated 4400 lumens across a 1200mm fitting line.
        • 3CCT switch (3000K/4000K/6000K) — set warm, neutral, or cool white at install using the on-board colour temperature switch.
        • Diffused PC cover — the diffused polycarbonate lens spreads even light and cuts glare over work areas and walkways.
        • 120 lumens per watt — the 4400 lumen output runs at a measured efficiency of 120lm/W for low running cost.
        • 220-degree beam spread — the wide beam lights a room corner to corner without obvious hotspots.
        • Aluminium housing — the alloy body draws heat away from the SMD 2835 LEDs to support stable light output.
        • Surface or suspended mount — fix the 20400 flat to a ceiling or wall, or hang it on chain or wire over high bays.
        • Central cable entry, built-in terminal — the centre knockout and onboard terminal block give a quick fit-off with no separate driver.
        • Non-dimmable — the 20400 runs standard ON/OFF switching and is not rated for a dimmer circuit.
        • IP20 rated — suited to dry indoor areas only, not outdoor, damp, or washdown locations.
        • RCM marked to AS/NZS 60598 — compliant with the Australian luminaire standard and carries the Regulatory Compliance Mark.
        • 1-year replacement warranty — National Light Sources covers the batten against manufacturing defects in domestic and commercial use.

        Where to use

        • Garages and home workshops — the 20400 puts bright, even light over benches, vehicle bays, and tool areas in domestic garages.
        • Sheds and farm buildings — multiple battens run down a shed line for a workshop or storage fit-out with consistent coverage.
        • Laundries and utility rooms — the diffused output suits indoor service spaces that need clear, low-glare light.
        • Offices and back-of-house — set the 20400 to 4000K neutral white for commercial rooms, store rooms, and corridors.
        • Fluorescent batten replacement — swap an ageing T8 or T12 fluoro batten for a single LED unit on a retrofit.
        • New builds and renovations — spec the 1200mm batten as standard general lighting in dry interior rooms.
        • Hallways and walkways — the wide 220-degree beam covers passage areas from a single ceiling line.

        Carrying only an IP20 rating, the NLS 20400 is built for dry indoor use only and offers no protection against moisture ingress. Do not install the batten in bathrooms, outdoor areas, or damp and washdown zones, and because the fitting is non-dimmable, never connect the 20400 to a dimmer circuit.

        Verified Sparky Direct customer reviews: NLS 20400 1200mm Diffused 40W Tri Colour LED Batten IP20 (20400)

        "Perfect for the garage providing plenty of light." — Penny

        "These LED battens work well, are easy to install and the price is good." — Matt

        "Nice lights great price" — Chris

        (20400)

        Installation of the NLS 20400 must be carried out by a licensed electrician. The batten hard-wires to 220-240V mains through a central cable entry and a built-in terminal block, and fixes to a flat ceiling or wall. A 240V lighting circuit feeds the fitting.

        The 20400 has an on-board 3CCT switch with three settings: 3000K warm white, 4000K neutral white, and 6000K cool white. Select the colour temperature on the fitting before or during install.

        The colour temperature can be changed after installation. Switch off the power at the circuit, move the on-board 3CCT switch to 3000K, 4000K, or 6000K, then restore power. The selected setting holds until changed again, so the batten can be re-tuned if a room's use changes.

        The NLS 20400 is non-dimmable and runs on standard ON/OFF switching only. Do not connect the batten to a dimmer circuit, as a dimmer can cause flicker or damage the driver. For dimmable lighting, choose a fitting rated for dimming on that circuit.

        The batten mounts two ways: fixed flat to a ceiling or wall, or suspended on chain or wire for high or open ceilings. Surface mounting hardware is supplied with the fitting. Suspension on chain or wire suits sheds, workshops, and warehouse bays where a drop is needed.

        The NLS 20400 complies with AS/NZS 60598 for luminaires and carries the Regulatory Compliance Mark (RCM). The IP20 rating covers dry indoor use. Compliance and warranty both depend on installation by a licensed electrician to the manufacturer specifications.

        The batten carries a one-year replacement warranty from National Light Sources, covering manufacturing defects in domestic and commercial use. The warranty runs from the invoice date and requires installation by a licensed electrician. Faulty units are handled as a return to Sparky Direct.

        The batten is supplied complete with the diffused cover fitted, plus surface mounting clips and fixing hardware. No separate LED driver is needed, as the driver is built into the fitting. Suspension chain or wire for hanging installs is bought separately where required.

        The batten is rated IP20 and is built for dry indoor areas only. Do not install it outdoors, in bathrooms, or in damp and washdown zones, because the IP20 housing offers no protection against water or dust ingress. Use a weatherproof fitting with a suitable IP rating for those locations.

        The NLS 20400 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year replacement
        Commercial Use: 1 Year replacement
        Warranty Method: Return to Sparky Direct

        Specification Details
        Model NLS20400
        Power 40W
        Colour Temperature 3000K / 4000K / 6000K (3CCT)
        Lumen Output 4400lm
        LED Type LED SMD 2835
        Beam Angle 220°
        CRI >80Ra
        Lumen Efficiency 120lm/W
        Input Voltage 220–240V AC, 50Hz
        Power Factor >0.9
        Operating Temperature -5°C to 55°C
        Material - Housing Aluminium
        Material - Cover Polycarbonate
        Mounting Surface or Hanging
        Length 1200mm
        Width 60mm
        Height 65mm
        Ingress Protection IP20

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand NATIONAL LIGHT SOURCES
        SKU 20400
        Model # 20400NLS
        Barcode # 9336700017293
        Package Weight 1.600kg
        TYPE VALUE
        Type Light
        Brand National Light Sources
        Colour White
        Height (mm) 65
        Width (mm) 60
        Length (mm) 1200
        Protection IP20
        Power Source 240V
        Mounting Surface Mount
        Lumens (lm) 3500lm 3800lm 3650lm
        Lighting Technology LED
        Light Colour (K) Tri Colour 3000 4000 6000 Kelvin
        Dimmable No
        Beam Angle 120 degree
        Installation Area Under cover
        Wattage (W) 40W
        Voltage (V) 240V

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products