Skip to main content
Get $15 Prezzee on $150 MAX9 or Clipsal Lighting | FREE Clipsal Shipping $330+ View

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our SAL SMS806WF-RC | Mantis Multi-Function Sensor Remote Control | 18 Buttons video.

        SAL | Mantis Multi-Function Sensor Remote Control 18 Buttons | White

        The SAL SMS806WF-RC is a handheld 18-button remote control for the SAL Mantis multi-function PIR sensor, finished in white and supplied with batteries. The SMS806WF-RC sets sensitivity, hold time, and daylight (lux) threshold, and switches the sensor between sensor mode, photocell mode, and manual on or off. SAL designates this remote for trade use only.

        A Mantis sensor sits high on an external wall or under an eave. That puts the TIME, SENS, and LUX dials out of reach once the fitting is up. Every later change to detection sensitivity or hold time means dragging the ladder back under the installation. Adjusting sensitivity, hold time, and lux threshold from ground level removes that step. Manual control of the PE cell function also lets you verify photocell behaviour in daylight, instead of waiting until dusk.

        Ground-level commissioning changes the economics of a sensor fit-off. An installer sets hold time, sensitivity, and lux threshold in front of the client, demonstrates the behaviour, and moves to the next fitting. Fewer return visits follow, because the settings are proven on site rather than estimated from datasheet figures. One remote services every Mantis sensor across an installation, so a single accessory covers the whole contract.

        Features

        • 18-button layout — dedicated buttons for on, off, sensor mode, photocell mode, sensitivity, hold time, and daylight threshold, with no menu scrolling.
        • Manual on and off — the ON button drives the connected load after a 10 second warm-up, and the OFF button drops it out.
        • Sensor mode defaults — one press of SENSOR sets 10 second hold time, 100 per cent distance sensitivity, and the daylight sensor disabled.
        • Six hold-time steps — the HOLD (TIME) button steps the load-off delay through six settings, from seconds up to tens of minutes.
        • Three sensitivity settings — SENS selects LOW at roughly 8 metres, MEDIUM at roughly 14 metres, and HIGH at roughly 18 metres detection distance.
        • Five daylight thresholds — LUX selects NIGHT under 10 lux, LOW around 25 lux, MEDIUM around 250 lux, HIGH around 500 lux, or DAY for 24 hour operation.
        • Photocell mode button — switches the Mantis sensor to dusk-to-dawn control, turning the load on below 10 lux and off above 150 lux.
        • Visual change confirmation — after any setting change the load cycles on and off and a red LED flashes in the sensor lens.
        • Batteries supplied — the SMS806WF-RC ships with batteries fitted, so it is ready to commission straight out of the packet.
        • Trade use only — SAL designates the remote for trade use, and the batteries it contains must be kept away from children because swallowing one can cause severe or fatal injury.
        • Accessory — the SMS806WF-RC has no function on its own and only adjusts a paired SAL Mantis multi-function sensor.

        Where to use

        • Eave and soffit sensor lighting — the SMS806WF-RC tunes hold time and lux threshold on external fittings mounted well above head height.
        • Commercial car parks and walkways — set a longer hold time and a night-only lux threshold so lighting runs when people are actually moving through.
        • Warehouse and workshop bays — sensitivity can be pulled back to LOW where forklift movement in an adjacent aisle keeps triggering the load.
        • Retail and office fit-offs — the remote lets an installer demonstrate sensor behaviour to the client at handover rather than describing it.
        • Facility maintenance rounds — the SMS806WF-RC re-commissions sensors during seasonal changes without a ladder or a second set of hands.
        • Residential exterior and garage sensors — adjust detection distance and daylight cut-in on driveway and carport fittings after the client has lived with them.

        The SMS806WF-RC does not switch a lighting circuit itself and holds no settings of its own. It works only with a compatible SAL Mantis multi-function sensor, so it will not adjust sensors from other manufacturers and replaces neither the wall switch nor the sensor. The sensor it controls must be installed by a licensed electrician, and the remote is not intended for use by children.

        (SMS806WF-RC)

        The SMS806WF-RC is the optional remote for the SAL Mantis multi-function sensor range, covering the SMS806WF in grey and the SMS806WF-BK in black. It has no effect on sensors from other manufacturers or on other SAL sensor families.

        The remote needs no wiring and no electrician. Batteries are already fitted, so it works from the moment the packet is opened. The Mantis sensor it controls is a different matter: that unit must be installed by a licensed electrician in accordance with AS/NZS 3000.

        Sensitivity, hold time, and daylight (lux) threshold all adjust from the remote. It also switches the sensor between manual on, manual off, automatic sensor mode, and photocell mode. After any change the connected load cycles on and off and a red LED flashes in the sensor lens.

        The SENS button steps through three levels. LOW gives roughly 8 metres of detection distance, MEDIUM roughly 14 metres, and HIGH roughly 18 metres. Maximum range applies at an installation height between 1.8 and 2.5 metres, with a 110 degree detection angle.

        Photocell mode turns the Mantis sensor into a dusk-to-dawn control. The connected load switches on when ambient light falls below 10 lux and switches off when it rises above 150 lux, with motion detection taken out of the equation. One button press activates it.

        The Mantis sensor carries TIME, SENS, and LUX dials on the unit itself, and override and photocell modes can be triggered by flicking the wall switch in a set pattern. The remote replaces the ladder work and gives repeatable button presses instead of dial positions.

        Sparky Direct lists a 5 year replacement warranty for domestic use and 3 years for commercial use, running from the invoice date, with the product returned to Sparky Direct. SAL warranties any supplied lithium batteries separately for 24 months. Warranty is void if the paired sensor is not installed by a licensed electrician.

        The SAL SMS806WF-RC is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 5 Year replacement
        Commercial Use: 3 Year replacement
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand SAL
        SKU SMS806WF-RC
        Barcode # 9328623130449
        Package Weight 0.020kg
        TYPE VALUE
        Type Light
        Brand SAL
        Colour White
        Power Source Batteries supplied
        Features Adjusts the sensitivity, time and light levels

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products