Search Results:
Search Results:
1 Choose Quantity
2 People Also Bought
500,000+ Orders Delivered FAST!
100-Day Money Back Guarantee
Over 8,064+ 5-Star Google Reviews
The Stronglink STKPLC6A1 is a 1 metre Category 6A patch lead, built from 4 pair F/UTP shielded cable with factory terminated RJ45 plugs at both ends. The STKPLC6A1 carries a blue LSZH jacket and is specified for 10GBase-T channel performance. It is made to ISO/IEC 11801 and AS/NZS 3080, is RoHS compliant and UL listed, and is tested to AS/CA S008 by a NATA accredited laboratory.
Patch fields fall apart when every port is fed by a two metre cord and the surplus is looped behind the equipment frame. A one metre lead reaches across several rack units or into the next cabinet section, with minimal spare cord to block airflow or trap heat. Screened cabling systems also surrender their advantage at the patch cord, where an unscreened lead undoes the continuity established on the permanent horizontal run. The overall foil screen continues the full length of the STKPLC6A1 and terminates inside the RJ45 connector at either end.
Data work is priced on labour hours, and factory terminated cords remove the slowest step in the sequence. Every STKPLC6A1 arrives pre-tested and booted, so there is no field crimping and no connector to re-terminate when a link fails certification. The slimline profile and anti-snag boot allow cords to sit flat across a densely populated 24 port panel and pull back out without disturbing an adjacent latch. Stocking one metre leads in blue maintains colour coded patching conventions throughout a communications room.
The STKPLC6A1 is a factory terminated patch cord and is not intended for use as fixed horizontal cabling. It cannot be punched down to an outlet or a patch panel, and the plugs cannot be removed and refitted on site. At 1 metre it covers short spans only, so measure the run from port to port before ordering.
(STKPLC6A1)
The foil screen carries through a channel where the outlets and patch panels at each end are also shielded, and where the screen is bonded to earth as the cabling system manufacturer specifies. Plugged into unshielded outlets, the cord still passes data, but the screening path stops at the plug.
No tools are needed. The cord is factory terminated with an RJ45 plug at each end and tested before packing, so it plugs straight into a patch panel port, outlet, or switch port. Fitting is limited to seating each plug until the latch clicks.
Stronglink Cat 6A patch cords work with RJ45 outlet products from any manufacturer, provided those outlets comply with the relevant industry cabling standards. Mixing brands within a channel is acceptable where every component is rated for Category 6A or Class EA performance.
The RJ45 plug uses the same 8P8C interface as Cat 5e and Cat 6 ports, so the cord plugs into older switches, outlets, and network cards. Performance across any channel is set by its lowest rated component, so a Cat 6A cord will not lift a Cat 5e link past Cat 5e.
F/UTP describes the shielding. A single foil screen wraps all four twisted pairs, while the pairs themselves are unscreened. The foil gives the cord protection against outside electrical noise and carries the screening of a shielded fixed cabling system through the patch field.
Cat 6A patch cords are designed to deliver channel performance across 10GBase-T applications. Short cords are common on panel to switch links and do not limit the data rate. Total channel length, cabling category, and the outlets at each end determine whether the link certifies at 10 gigabit.
LSZH stands for low smoke zero halogen. Under fire conditions the sheath gives off less smoke and no halogen gas, which matters in occupied buildings, escape routes, and comms rooms. Many commercial and public sector specifications call up LSZH cable in patching areas for that reason.
No. The STKPLC6A1 is a factory terminated stranded patch cord supplied at a fixed 1 metre length. The plugs are not field removable and the cord is not punched down to an outlet or patch panel, so the correct length is selected at order time.
The Stronglink STKPLC6A1 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 1 Year
Commercial Use: 1 Year
Warranty Method: Return to Sparky Direct
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | Stronglink |
| SKU | STKPLC6A1 |
| Model # | STKPLC6A1 |
| Barcode # | 9337376005751 |
| Package Weight | 0.030kg |
| TYPE | VALUE |
|---|---|
| Type | Patch Lead |
| Brand | Stronglink |
| Colour | Blue |
| Category Type | 6A |
| Length (m) | 1 |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.
$5.52 $5.02 ex. GST
$19.79 $17.99 ex. GST
$44.92 $40.84 ex. GST
$12.15 $11.05 ex. GST
$13.34 $12.13 ex. GST
$7.75 $7.05 ex. GST
$33.44 $30.40 ex. GST
$11.67 $10.61 ex. GST
