Skip to main content
Free Bugle Box with Order $500+ | Free Shipping $330+ | 3025-VW Price DROP More

Flat Rate Standard Shipping Only $15.95

100 Day Money Back Guarantee

Australian Customer Service

About Us

07 5428 3044
Australia's #1 Online Electrical Wholesaler | 400,000+ happy customers
Google Reviews
4.9 8,058+ reviews

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Wattmaster | Ratcheting Crimper Kit 0.5 to 10mm² with 3 Die Sets | Hardened 3mm Alloy Steel

        The Wattmaster WATK007-KIT is a ratcheting hand crimper supplied with three interchangeable die sets, covering pre-insulated, non-insulated and bootlace terminals. The WATK007-KIT is built from hardened 3mm special alloy steel, measures 240mm long and weighs 690g. Crimping capacity runs from 0.5mm² up to 10mm², depending on which of the three supplied dies is fitted.

        Pre-insulated, non-insulated and bootlace terminals each take a different crimp profile, so a single fixed-die crimper only covers part of the work. The WATK007-KIT carries three die sets on one frame, swapped over by a click-fit action that takes seconds. Dies that are not in use sit inside the handles, so the set stays together between jobs.

        One frame covers three terminal families, so there is no tool changeover part-way through a termination. The ratchet mechanism works toward a consistent crimp across a long run of terminals rather than relying on hand pressure. The same click-fit interface takes 12 different die types, so the frame's coverage extends without buying another crimper.

        Features

        • Three die sets supplied — the WATK007-KIT ships with dies for pre-insulated terminals, non-insulated terminals and bootlace ferrules.
        • Click-fit die change — dies swap over in seconds by a simple click action, with no fasteners to undo and no separate tool needed.
        • Die storage in the handles — the two dies not currently fitted stow inside the tool handles, so the full set travels with the frame.
        • Pre-insulated capacity 0.5 to 6.0mm² — covers the common pre-insulated terminal and connector sizes used in appliance and equipment work.
        • Non-insulated capacity 1.5 to 10.0mm² — suits bare terminals and connectors up to 10mm² on the supplied non-insulated die.
        • Bootlace capacity 0.5 to 10.0mm² — crimps bootlace ferrules across the full range in one die, from 0.5mm² control wiring up to 10mm².
        • Ratchet mechanism — drives the jaws through a repeatable stroke, giving a consistent crimp across a run of terminals.
        • Hardened 3mm alloy steel frame — the WATK007-KIT is made from hardened 3mm special alloy steel for repeated trade use.
        • Hardened die sets — the dies themselves are hardened, holding their crimp profile rather than spreading under load.
        • Bi-component handles — two-material grips give a defined hand position through repeated crimping.
        • 240mm tool length — the longer frame gives a two-handed purchase on the stroke while still fitting inside a board or panel.
        • Supplied dies cover three terminal types — open barrel, coaxial and modular plug terminations need a different die, which is not part of this kit.

        Where to use

        • Switchboard and sub-board terminations — the WATK007-KIT crimps non-insulated terminals and connectors on board and mains work up to 10mm².
        • Control panel wiring — bootlace ferrules land cleanly in DIN terminal blocks and screw terminals across control and instrumentation circuits.
        • Appliance and equipment repair — pre-insulated terminals and connectors on cooktops, motors, pumps and machine looms.
        • Mixed-terminal service calls — the click-fit die change means the terminal type does not have to be known before arriving on site.
        • Mobile and van-based work — dies stowed in the handles keep the WATK007-KIT as a single item in the tool bag with nothing loose to lose.
        • Bench and workshop cable preparation — the ratchet stroke suits batching a run of terminals to the same crimp.

        The WATK007-KIT is not set up above 10mm²: the supplied dies stop at 10mm² on non-insulated and bootlace terminals, and at 6mm² on pre-insulated terminals. Open barrel terminals, coaxial plugs and modular data plugs call for dies outside this kit. Lugs and terminals larger than 10mm² are outside the supplied die range.

        (WATK007-KIT)

        The Wattmaster WATK007-KIT is used for crimping pre-insulated, non-insulated and bootlace terminals with one tool.

        It includes 3 die sets for pre-insulated terminals, non-insulated terminals and bootlace ferrules.

        It covers terminal sizes from 0.5mm² to 10mm².

        The dies can be swapped in seconds using the click-fit system.

        It helps deliver a full, consistent crimp before the tool releases.

        Yes. Sparky Direct stocks the Wattmaster WATK007-KIT with fast dispatch across Australia.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.

        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.

        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Wattmaster
        SKU WATK007-KIT
        Model # WATK007-KIT
        Barcode # 9328587015776
        Package Weight 0.403kg
        View Datasheet
        TYPE VALUE
        Type Tools
        Brand Wattmaster
        Crimping Dies 12 Different Types
        Overall Length (mm) 240

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products
        Sterling 29-513 | 140mm Black Panther Multipurpose Electrician Scissors | Serrated
        Sterling 29-513 | 140mm Black Panther Multipurpose Electrician Scissors | Serrated

        $45.73 $41.57 ex. GST

        Wiha 35389 | 6 Piece SoftFinish Electric SlimFix Screwdriver Set
        Wiha 35389 | 6 Piece SoftFinish Electric SlimFix Screwdriver Set

        $111.59 $101.45 ex. GST

        See Alternative
        Bordo 3011-S1 | Drill & Tap Set 8G, 10G, 12G, 1/4", 5/16", 3/8"
        Bordo 3011-S1 | Drill & Tap Set 8G, 10G, 12G, 1/4", 5/16", 3/8"

        $94.91 $86.28 ex. GST

        Dual Action 10043102 | 31 Piece 1/4 Drive 6-Point Socket Set | Metric 4-15mm
        Dual Action 10043102 | 31 Piece 1/4 Drive 6-Point Socket Set | Metric 4-15mm

        $120.94 $109.95 ex. GST

        Koman KM-E800A | Lithium Flaring Tool 1/4 - 3/4 | 11.1V
        Koman KM-E800A | Lithium Flaring Tool 1/4 - 3/4 | 11.1V

        $525.00 $477.27 ex. GST

        Major Tech RSS22 | 22pc Ratchet Socket Set
        Major Tech RSS22 | 22pc Ratchet Socket Set

        $125.05 $113.68 ex. GST

        Major Tech WS0520 | 0.5mm to 2.0mm Automatic Wire Stripper
        Major Tech WS0520 | 0.5mm to 2.0mm Automatic Wire Stripper

        $29.03 $26.39 ex. GST

        Bordo 5700-ES200 | Dual Mode Electric Screwdriver
        Bordo 5700-ES200 | Dual Mode Electric Screwdriver

        $89.32 $81.20 ex. GST

        Notify Me