Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Flat Rate Standard Shipping Only $15.95

100 Day Money Back Guarantee

Australian Customer Service

About Us

07 5428 3044
Australia's #1 Online Electrical Wholesaler | 400,000+ happy customers
Google Reviews
4.9 7,012+ reviews

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Wattmaster | 240mm Ratchet Crimper Non-Insulated | Red

        The Wattmaster WATMH14W is a ratchet crimper for non-insulated terminals and lugs rated 1.5mm² to 16mm². Featuring chrome molybdenum steel jaws and heat-treated carbon alloy steel construction, the WATMH14W delivers repeatable, controlled crimps on cable terminals under switchboard and control panel applications.

        Switchboard and control panel wiring demands consistent terminal compression to ensure tight electrical contacts on bus bars and neutral blocks. The WATMH14W suits routine fit-off work where a one-handed ratcheting action reduces hand fatigue and helps complete the crimp cycle before release, lowering the risk of incomplete crimps on the job site.

        Cable termination in switchboards, distribution boards, and control cabinets calls for a tool that works across a range of common lug sizes without tool changeover. The WATMH14W handles 1.5mm², 2.5mm², 6mm², 10mm², and 16mm² terminals, covering most residential and commercial single-phase and three-phase wiring scenarios. The ratchet design supports faster work cycles and tighter, more consistent compression than manual hand tools.

        Features

        • 1.5mm² to 16mm² Crimp Range — covers non-insulated terminals from small gauge domestic wiring to large switchboard and sub-board lugs, with no tool swaps.
        • Ratchet Crimping Action — the ratchet holds the handles in the open position until the full crimp cycle is complete, then releases to prevent partial crimps.
        • Chrome Molybdenum Steel Jaws — jaw faces are manufactured from durable chrome molybdenum steel, rated for regular site and workshop use.
        • Heat-Treated Carbon Alloy Handles and Dies — the WATMH14W body is cast from carbon alloy steel and fully heat-treated to resist fatigue on repeated compressions.
        • Non-Slip TPR Grips — the handle features a rubberised non-slip TPR coating for better grip security in wet conditions or when wearing gloves.
        • One-Hand Operation — lightweight construction at 460g allows one-handed operation after initial positioning, reducing hand fatigue on long crimping jobs.
        • Black Baked Finish Jaws — the jaw faces have a durable black baked enamel finish that resists corrosion and wear.
        • 240mm Length — compact 240mm body fits easily in a tool bag or pouch and manoeuvres in tight switchboard spaces.
        • Designed for Non-Insulated Terminals Only — the WATMH14W is engineered for bare copper lugs and crimped links, not insulated terminal boots or push-on connectors.

        Where to use

        • Switchboard and Distribution Board Assembly — fitting non-insulated lugs onto neutral bars, earth bars, and main switches in residential switchboards and sub-boards.
        • Control Panel Wiring — terminating cable conductors to contactor coils, timer blocks, and auxiliary relay terminals in industrial and commercial control cabinets.
        • Cable Repair and Retrofit — replacing corroded or damaged terminals on existing switchboard circuits without removing the entire run.
        • Domestic Rewiring and Upgrades — fitting new distribution board circuits during house rewires or load upgrade work where bulk terminals are crimped on-site.
        • Three-Phase Installation — suitable for three-phase switchboard, motor control, and sub-board work where balanced loads demand consistent compression across all three phases.
        • The WATMH14W is not suitable for insulated terminal boots or push-on connectors, nor for automated high-volume terminal pressing. It is a manual hand tool designed for shop floor and on-site electrical termination work.

        (WATMH14W)

        The Wattmaster WATMH14W is used for crimping non-insulated terminals and lugs onto electrical conductors.

        It is designed for non-insulated terminals from 1.5mm² up to 16mm².

        The ratchet action helps ensure the crimp cycle is completed before the tool releases, supporting more consistent results.

        No. It is specifically designed for non-insulated terminals and lugs.

        Ratchet crimpers help deliver repeatable compression and reduce the chance of incomplete crimps.

        The crimping jaws are manufactured from durable chrome molybdenum steel.

        Common applications include switchboard assembly, control panel wiring, cable terminations and electrical maintenance work.

        Yes. Sparky Direct stocks the Wattmaster WATMH14W with fast dispatch across Australia.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.

        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.

        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Wattmaster
        SKU WATMH14W
        Model # WATMH14W
        Barcode # 9328587020329
        Package Weight 0.403kg
        View Datasheet
        TYPE VALUE
        Type Tools
        Brand Wattmaster
        Colour Red
        Length (mm) 240
        Crimping Capacity (mm²) 1.5, 2.5, 6.0, 10.0 and 16

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products
        Klein Tools 32933 | 7-in-1 Impact Flip Socket Set for Impact Drivers
        Klein Tools 32933 | 7-in-1 Impact Flip Socket Set for Impact Drivers

        $43.95 $39.95 ex. GST

        Notify Me
        CLIPSAL Magnetic Power Bit 100MM X PH#2 | 357PB
        CLIPSAL Magnetic Power Bit 100MM X PH#2 | 357PB

        $6.41 $5.83 ex. GST

        Notify Me
        Wattmaster WAT90CS125 | Catch Cutting Nippers | 125mm
        Wattmaster WAT90CS125 | Catch Cutting Nippers | 125mm

        $51.92 $47.20 ex. GST

        Major Tech MT247 | Battery Resistance Tester | Bluetooth
        Major Tech MT247 | Battery Resistance Tester | Bluetooth

        Now $1,402.50 $1,455.00 ex. GST

        Klein Tools 93LCLS | Self-Levelling Laser Level Red Cross-Line | 20m
        Klein Tools 93LCLS | Self-Levelling Laser Level Red Cross-Line | 20m

        $305.00 $277.27 ex. GST

        Major Tech VSKN013S | 38mm Curved Blade 1000V Stripping Knife
        Major Tech VSKN013S | 38mm Curved Blade 1000V Stripping Knife

        $82.50 $75.00 ex. GST

        Major Tech VRRS13 | 1000V 13mm Insulated Ring Gear Wrench
        Major Tech VRRS13 | 1000V 13mm Insulated Ring Gear Wrench

        Now $57.20 $61.00 ex. GST

        Major Tech VB06 | Insulated Hex Key 6mm 1000V AC/1500V DC
        Major Tech VB06 | Insulated Hex Key 6mm 1000V AC/1500V DC

        $48.40 $44.00 ex. GST