Search Results:
Search Results:
Search Results:
Search Results:
Find the best snow leopard glass look power points here at Sparky Direct. [ Read More ]
Snow Leopard sits at the decorative end of the Trader wiring accessories range, supplied by GSM Electrical. It targets builders, electricians, and renovators who want a premium-feel power point without the cost or fragility of real glass. The plates carry a high-gloss UV-stabilised polycarbonate cover, and the electrical mechanism behind them is a standard Australian 10A 250V design rated for general GPO use.
Positioned as affordable luxury, Snow Leopard suits kitchens, splashbacks, apartments, display homes, hospitality fit-outs, and other visible wall locations where a plain white outlet would look out of place. The plates are designed to coordinate with matching Snow Leopard light switches across a project.
Each plate has three distinct parts. The decorative cover is the visible glass-look polycarbonate face. Behind it sits a metal grid that screws to the wall box. The grid carries the switch mechanism, with sockets that accept the standard Australian three-pin plug. The cover clips on last and hides the screws, giving the flush appearance that defines the range.
Electrically, these are general-purpose outlets for 230 to 240 volt mains use. They run normal household loads such as fridges, toasters, TVs, phone chargers, and lamps. Anything beyond a standard 10A GPO needs a different product class.
Trader is GSM Electrical's wiring accessory brand, distributed widely through Australian electrical wholesalers. Snow Leopard is one of Trader's premium decorative series, sitting alongside the Flat Cat slimline plates and the Puma multi-gang USB range. Electricians, cablers, builders, and renovation specifiers buy through trade channels rather than retail hardware stores, which keeps part numbers consistent and warranty paperwork attached to the order.
The range works in kitchens, splashbacks, living areas, bedrooms, studies, apartment fit-outs, display homes, office reception walls, and hospitality rooms. Anywhere the outlet is on a feature wall, in eyeline of guests, or near premium joinery, the glass look pulls the plate visually into the surface rather than letting it stick out. Plain white outlets remain fine for garages, laundries, workshops, and utility rooms where appearance carries less weight.
The glass look is the headline design feature, and it sets Snow Leopard apart from a standard plastic GPO. The plates are not made from real glass. They are high-gloss UV-stabilised polycarbonate, moulded and finished to reflect light the way a polished glass tile does. This delivers the appearance trade customers want for premium interiors, without the fragility or cost of genuine glass accessories.
In wiring accessory terms, glass look refers to a polycarbonate or acrylic faceplate engineered with a deep, mirror-grade gloss. The material resists day-to-day knocks, scuff marks, and yellowing far better than real glass plates resist cracking. Compared with a standard matte plastic GPO, the surface throws more light back, looks deeper, and reads as a step up in quality. Compared with a brushed-metal plate, it adds reflectivity without the cooler industrial feel of metal.
Standard decorator power points often show a black base plate around the visible cover. Snow Leopard plates sit closer to flush against the wall, with no contrasting base showing through. On tiled splashbacks, painted feature walls, and premium joinery, this matters: the outlet reads as a clean rectangle on the surface rather than a stacked assembly. The flush edge also reduces the lip that collects dust, smudges, and grease, which is useful behind kitchen benches.
The range covers four core finish combinations. White on White suits classic, coastal, Hamptons, and Scandi interiors. White on Silver lifts the look slightly and pairs well with stainless steel appliances and chrome tapware. Black on Black is the strongest statement and reads as deliberately premium against pale stone or timber. Black on Silver bridges between dark joinery and metallic hardware. When specifying a whole-home fit, match the finish across power points, switches, data plates, and any nearby dimmer switches for a consistent visual line.
Snow Leopard is not styled-up plastic with a poor mechanism behind it. Trader has built practical installer features into the range, including a built-in spirit level on the grid, the Claw Mech switching system, the Cat's Eye Dolly indicator, and Cat Flap screw covers. These help licensed electricians fit plates faster and finish them cleaner. The wiring side of installation must still be carried out by a licensed electrician.
The grid carries a small bubble level, so the electrician can confirm the plate is sitting true before tightening the screws. Across a wall of five or six outlets, this avoids the staircase effect that pulls the eye to whichever plate is sitting half a degree off. On display homes, renovations, and feature-wall jobs where visual quality is part of the brief, the level pays for itself on the first room.
The Claw Mech is Trader's switching mechanism, rated for 16AX general lighting use and 20A inductive loads where used in matching switch plates. In plain terms, it handles common household and small commercial switching duties reliably. The Cat's Eye Dolly is the small clear window on the dolly that shows whether the switch is on or off at a glance. Final circuit suitability still depends on the actual connected load and on the licensed electrician's assessment of the circuit.
Snow Leopard plates fit the standard 84mm mounting centres used across Australian wiring accessories. They mount to common wall boxes used by electricians on new builds and renovations. On retrofit work, check the depth of the existing wall box before ordering: shallow boxes designed for slim GPOs can sit too tight against modern mechanisms. The Snow Leopard mech also lines up with Trader's wider Meerkat-style and Clipsal 30 Series-style grid layouts in cases where mixed-range projects need a compatible footprint.
Order all plates for one room or feature wall in a single batch. Polycarbonate moulding can show minor batch-to-batch variation in gloss depth, and matched batches give the cleanest visual result across multiple outlets.
Snow Leopard is a coordinated family rather than a single product. The range covers single and double GPOs, GPOs with extra switches on the plate, dedicated switch plates from one to six gangs, dimmer modules, and USB-A and USB-C charging variants. Specifying complete rooms from the same family keeps the finish, gloss depth, and plate proportions consistent across every visible wall plate.
The single GPO is a 10A 250V outlet on a standard plate, used where a single device is permanent (a feature lamp, a wall-mounted display, a clock). The double GPO is the workhorse for most rooms: bedrooms, living areas, studies, and kitchen benchtops. Doubles also pair well above bedside tables, where one socket runs a lamp and the other charges a phone overnight. For higher-current appliances, the dedicated 15 Amp power points in the broader Trader range are the right call instead.
Snow Leopard offers GPOs with an extra switch built into the same plate, typically used to control a nearby light, fan, or rangehood from one location. Dedicated switch plates run from one gang up to six gangs, letting a single switch plate control multiple circuits in living areas, hallways, and entry walls. Planning all visible plates together in a room means the switch and outlet faces match each other exactly.
The range includes USB charging variants with built-in USB-A, USB-C, or combination outlets. These suit bedrooms, hotel rooms, kitchen islands, study desks, and shared family charging stations. Auto-switching chargers cut their output when the device is full, which avoids the trickle drain that plagued earlier USB outlets. For a multi-gang USB station in a busy room, the matching Puma GSM Trader power points also share the GSM Trader build standard and may suit where Snow Leopard does not stock the exact configuration.
Fixed wiring accessories sold in Australia must meet the relevant AS/NZS product standards, and installation must comply with the Wiring Rules. Snow Leopard power points are designed to meet these requirements out of the box, but compliance only holds if the product is installed correctly by a licensed electrician. This section sets out the framework, not a wiring guide.
AS/NZS 3112 is the product standard for plugs and socket outlets in Australia. It covers the pin configuration, socket dimensions, electrical safety, and shutter behaviour of standard three-pin GPOs. AS/NZS 3000, known as the Wiring Rules, governs how those outlets are wired into a circuit, including circuit protection, RCD coverage, cable selection, and earthing. Buyers who need product compliance records for builder handover or inspection should keep the supplier invoice and product part number on file.
In every Australian state and territory, installing, replacing, relocating, or rewiring a fixed power point is restricted electrical work. It must be performed by a licensed electrician. This rule applies even when the existing outlet appears identical to the new one. Homeowners and renovators can choose, specify, and purchase Snow Leopard plates themselves, but the final connection and fit-off has to go through a licensed trade. Before ordering, confirm the circuit load, the wall box depth, the location suitability, and the compatibility of any existing mechanisms.
Trader applies a 10-year manufacturer's warranty to most current Snow Leopard products. Confirm warranty terms on the specific part number at purchase. For cleaning, wipe the plate with a soft dry cloth, or a slightly damp microfibre cloth for kitchen and high-touch areas. Avoid abrasive sponges, solvent-based cleaners, and bleach: these can micro-scratch the polycarbonate and dull the gloss over time. The UV-stabilised polymer resists yellowing in sunlit rooms, but any plate that looks loose, cracked, or scorched should be inspected by an electrician.
Safety note: Do not attempt to remove a Snow Leopard cover plate while the circuit is live. Live work on fixed wiring is restricted to licensed electricians using the correct procedures and isolation steps.
Buyers comparing Snow Leopard to other power point options usually weigh four factors: appearance, durability, price, and project fit. The comparison below sets Snow Leopard against standard plastic plates, real-glass premium plates, and slimline or designer ranges, so specifiers can decide where the glass look earns its place.
| Power Point Type | Visual Finish | Durability | Typical Use | Relative Cost |
|---|---|---|---|---|
| Snow Leopard glass look | High-gloss flush plate | High (polycarbonate) | Feature walls, kitchens, premium fit-outs | Mid |
| Standard plastic GPO | Matte white | High | Utility rooms, rentals, garages | Low |
| Genuine glass premium GPO | True glass surface | Lower (brittle) | Ultra-premium custom builds | High |
| Slimline plastic (e.g. Flat Cat) | Low-profile matte | High | Renovations, shallow wall boxes | Low to mid |
| Premium metal or brushed plate | Industrial metal | High | Hospitality, commercial fit-outs | Mid to high |
A standard plastic GPO costs less and works just as well electrically. In a garage, laundry, rental, or behind a fridge, the standard option is the right call. In a kitchen with stone benchtops, a tiled splashback, or any room where the outlet is on a feature wall, the glass look noticeably lifts the finish. The price gap is meaningful per outlet but small across a whole project once labour, cabling, and joinery are accounted for. For shallow walls or retrofit work where depth is tight, the Flat Cat slimline range is a useful alternative within the same Trader family.
Real glass faceplates do exist at the very top of the market, usually in custom builds. They look stunning and they break. A dropped tool during fit-off, a kitchen knock during cooking, or a heavy bag against the wall can crack a real-glass plate. Snow Leopard's polycarbonate gives a comparable visual outcome at a meaningfully lower price, with realistic day-to-day durability. Premium metal plates suit commercial, hospitality, and industrial-look projects, where the cooler metal finish is part of the design brief. For warmer residential interiors, the glass look usually reads better against soft furnishings and stone.
Other glass-look ranges exist from Clipsal, HPM, and import brands. When comparing, look at four points. Does the plate sit flush to the wall, or does it show a visible base? Does the grid carry an inbuilt level? Does the warranty match the 10-year Trader cover? And is the mechanism compatible with surrounding range plates already specified? Check finish availability and live stock before specifying project-wide, especially on tight build schedules.
Choosing the right configuration for a room comes down to finish, gang count, USB requirement, and existing wall box compatibility. The framework below applies to homeowners specifying for a renovation, builders pricing a new build, and electricians who need to confirm what to order. The wiring decision still belongs to the licensed electrician on the job.
Match the finish to the interior palette. White on White reads cleanest against light walls, kitchens with pale stone, and coastal or Hamptons styling. White on Silver suits stainless steel appliances, chrome tapware, and contemporary kitchens. Black on Black works for dark feature walls, moody bathrooms, and statement living rooms with black joinery or framing. Black on Silver bridges between black joinery and brushed metallic hardware. For whole-home consistency, order all plates from one batch where possible.
Use double GPOs as the default for most rooms. Add USB variants in bedrooms, kitchen islands, studies, and any spot with shared device charging. Use four-gang multi-USB plates near family hubs, hotel-style rooms, and home offices. Use extra-switch GPOs near rangehoods, ducted heaters, and other loads that benefit from a local kill switch. Use multi-gang switch plates for room-entry walls controlling lights, fans, and feature lighting from one point. Loads that exceed the standard 10A GPO rating need a different product and a licensed electrician's circuit check.
New builds offer the most flexibility: the wall boxes, finishes, and configurations are specified from the outset. Renovations need a wall box depth check first, especially in pre-2000 brick veneer homes where shallow steel boxes were common. Retrofit work also needs the existing wiring condition assessed before any new accessory is fitted. Order the full quantity for a room or feature wall in one go to keep finish consistency and avoid backorder delays during fit-off.
Snow Leopard plates are sold through Australian electrical wholesalers, online electrical suppliers, and trade procurement channels. Buying through authorised channels keeps the manufacturer warranty in force, gives access to compliance documentation if it is needed at handover, and ensures the part numbers match what the electrician is expecting on site.
Trade wholesalers stock Snow Leopard alongside the rest of the Trader range. Electricians typically order by part number, finish code, and gang count: SNPP1G for a single, SNPP2G for a double, plus the finish suffix (for example WW for White on White). Authorised channels also keep paper records of supply, which can matter for warranty claims on a multi-year build.
For project quantities, online ordering gives clearer visibility over stock levels, finish options, and matched accessories. Sparky Direct stocks the full Snow Leopard power points range and the matching switches, and ships Australia-wide for trade and renovation buyers. Cross-check the cart against the project specification before checkout: gang count, finish code, and USB variant are the three places most ordering errors occur.
Before placing the order, confirm five things. Pick the finish code: White on White, White on Silver, Black on Black, or Black on Silver. Set the gang count on each plate. Decide whether USB charging is needed at that location. Check the wall box depth where the plate will land. Note any matching switch or data plates required to keep the visual line consistent. Order the complete set for a room in one transaction wherever possible.
Watch Snow Leopard SNPP1GWW | Single Power Point GPO 10Amp 250v | Glass Look video
Watch Snow Leopard SNPP2GWW | Double Power Point GPO 10Amp 250v | Glass Look video
Watch Snow Leopard SNSWDPOV45WW | Switch Oven 45A Double Pole 250V | Glass Look video
The products that you supplied look fantastic with our new kitchen. They add a touch of elegance to the power outlets and switches. Also the price of your products are great, much cheaper than ordinary electrical stores. Your companies customers service and delivery times far exceed any business that I have dealt with in the past.
Looks very smart and fairly priced, Easy to install, the water level gauge made installation straight.
Wanted a glass look set of GPO's and lights switches and this Snow Leopard product met the requirement
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Snow Leopard Glass Look Power Points → Get Expert Advice →Yes. They are suitable for most indoor areas when installed in appropriate locations.
Snow Leopard Glass Look Power Points are available from Sparky Direct, offering convenient Australia-wide delivery from a trusted electrical supplier.
Consider the room, desired finish, and confirm suitability with your electrician before purchasing.
Returns depend on the seller’s return policy and whether the product is unused and in original packaging.
They usually include a manufacturer’s warranty, subject to correct installation and normal use.
They are typically sold individually, allowing you to order the exact quantity required.
Matching products within the Snow Leopard Glass Look range are generally available through electrical suppliers.
Yes. They can be used consistently across a property, subject to electrical design and compliance.
Yes. They are designed for regular everyday use in residential and light commercial environments.
Yes. Licensed electricians are generally familiar with installing decorative power point ranges.
Yes. Their smooth, glass-style surfaces can be wiped clean easily.
Yes. They are popular in renovations where a premium look is desired.
Safety depends on correct installation and appropriate use. A licensed electrician can advise if required.
Snow Leopard “Glass Look” Power Points are decorative electrical outlets designed to provide a sleek, glass-style appearance while delivering standard power functionality.
Yes. They are often selected for modern, minimalist, and luxury interiors.
They offer a stylish, glass-style finish that enhances contemporary interior design.
They are designed to meet Australian electrical safety requirements, with overall safety dependent on correct installation and use.
Yes. The range includes configurations suitable for double power point installations.
They are designed to suit standard Australian wall box dimensions, subject to installer assessment.
Yes. They are suitable for offices, hospitality, and other light commercial spaces.
Yes. They are commonly used in homes where a modern, high-end finish is desired.
Most Snow Leopard Glass Look Power Points are rated at 10 amps for general household and light commercial use.
They are designed for standard Australian mains supply of 230–240 volts AC.
Yes. Installation or replacement must be carried out by a licensed electrician in accordance with AS/NZS 3000 Wiring Rules.
Yes. They are designed to comply with relevant Australian electrical requirements, including AS/NZS 3112, when installed correctly.
