Connected Switch Gear SD-CUSTOM-SS-LS101V | Custom Engraved 1 Gang Light Switch | Stainless Steel
$28.84
$26.22 ex. GST
Search Results:
Search Results:
Find the best Custom Light Switch Engravings here at Sparky Direct. [ Read More ]
Custom light switch engravings are light switches with your own wording permanently engraved into the plate. Sparky Direct engraves them in-house and keeps adding new light switches to the custom engraving category.
The custom engraved light switch range is growing. It currently includes 1 gang and 2 gang switches from the Connected Switch Gear Platinum Series, with 316 brushed stainless steel plates. New styles and gang options are added regularly.
SKU: SD-CUSTOM-SS-LS101V
SKU: SD-CUSTOM-SS-LS102V
We add new engraved switches as they are ready. Check the products listed on this page for the latest options. Need an engraved rocker instead of a plate? See the full custom engravings range, including Clipsal Iconic custom text dollies.
Current stainless plates take up to 12 characters on one line above each switch. A 1 gang plate takes one line. A 2 gang plate takes two lines, one above each switch.
Engraving is permanent. It cannot be changed once cut, so check every letter before you order. Character limits can differ between switch styles, so check each product page.
Labels peel and marker pen wears off. Engraved text is cut into the plate, so it will not fade or rub off.
Current stainless engraved switches are rated 10AX, mount on 84mm screw centres and need a 96mm x 67mm cut-out. The plates take Clipsal 30 series and NLS mechanisms.
Current plates take Clipsal 30 series and NLS mechanisms, plus phone outlets, data outlets and dimmers. Engraving the face does not change what fits behind it. As new styles join the range, check each product page for its specs.
Use them where the load is out of sight or where several switches look the same. Pumps, tank heaters, exhaust fans and multi-zone lighting are the most common jobs.
Pick a switch from the range, type your text into the custom text field, check it, then add to cart. Sparky Direct engraves it in-house and dispatches in 1-2 days.
Pick the gang count and style that suits the job from the products listed on this page.
Type it into the custom text field. Multi-gang switches have one field per switch.
Keep each line within the character limit shown on the product page. Read it back once more. Engraving cannot be undone.
If the text field is empty, the switch ships blank. Sparky Direct will not contact you for wording.
Sparky Direct engraves the plate in-house. Estimated dispatch is 1-2 days, with delivery Australia-wide.
A licensed electrician must install it. Fixed wiring work in Australia must meet AS/NZS 3000:2018, the Wiring Rules, and the warranty is void without a licensed installer.
Set the cut-out at rough-in so the engraved plate goes straight on at fit-off. For the current stainless range, Connected Switch Gear lists BP1 and BP2 plaster brackets, sold separately, with a BPC cover to protect the bracket during render.
All fixed electrical work in Australia must be done by a licensed electrician in line with AS/NZS 3000:2018.
Current stainless engraved switches carry a 10 Year In House Warranty from the invoice date. Engraved switches are made to order, so change-of-mind returns do not apply.
Read the full returns policy.
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Shop Custom Light Switch Engravings Get Expert AdviceArticle reviewed by: Licensed electrician Andrew Aranovitch (Licence #40389), with 25+ years of experience in commercial and residential electrical contracting across Queensland and New South Wales.
Industry sources: Connected Switch Gear Platinum Series product data, Standards Australia AS/NZS 3000:2018, AS/NZS 3100:2009, AS/NZS 3133:2008+A1:2009
Last updated: 30 October 2026 | Sparky Direct - Australia's Leading Online Electrical Wholesaler Since 2005
We guarantee Sparky Direct will save you time and money!
A custom light switch engraving is a stainless steel light switch with your chosen text permanently laser-engraved into the plate face before dispatch. Sparky Direct engraves them in-house on light switches. The engraving is laser cut into the surface, so it cannot peel, fade, or rub off. You enter your wording when placing the order, and the switch arrives ready to install.
Current switches accept up to 12 characters on one line above each gang. A 1 gang switch has one line. A 2 gang switch has two lines, one above each rocker, each independently worded. Spaces count as characters. Shorter wording engraves larger and reads more clearly, so keep text brief where possible.
Current engraved stainless plates fit Clipsal 30 series mechanisms and NLS mechanisms. They also accept phone outlets, data outlets, and dimmers on the same plate. The engraving is on the plate face only and does not affect mechanism compatibility. These plates do not fit all switch series, so confirm the mechanism brand and model before ordering.
The current range includes 1 gang and 2 gang options. Additional gang configurations are being developed and will be added to the custom light switch engravings category as they become available. Contact Sparky Direct at support@sparkydirect.com.au to register interest in a specific gang count.
No. Engraving is permanent and cannot be undone or corrected once cut. If you realise there is an error immediately after ordering, contact Sparky Direct as quickly as possible. If the plate has not yet been engraved, the text may be correctable. Once engraving has started, the plate cannot be changed. Always read your text back character by character before completing checkout.
No. The engraving is applied to the outer face of the plate only. The switch mechanism and internal components are unchanged. The switch remains rated 10AX and compliant with AS/NZS 3100:2009 and AS/NZS 3133:2008+A1:2009.
Yes. Installing a light switch involves connecting to fixed wiring, which is licensed electrical work under Australian law and AS/NZS 3000:2018. All states and territories require a licensed electrician for this work. The 10-year warranty on current stainless engraved switches is also conditional on licensed installation.
No. Custom engraved switches are made to order and are excluded from the standard 100-day change-of-mind return window. A switch engraved correctly to your submitted text cannot be returned. If a switch arrives faulty or damaged, report it within 24 hours of delivery.
Short, direct labels that name the circuit or load work best. Common examples include PUMP, DECK LIGHTS, EXHAUST FAN, TANK HEATER, POOL LIGHTS, and CEILING FAN. Avoid long phrases. At 12 characters the text is still readable, but shorter wording engraves larger and is easier to read in low light or from a distance. Name the load rather than the room for the clearest result.
Sparky Direct engraves the plate in-house and estimated dispatch is 1 to 2 business days from order. This is longer than a standard stocked item. If you need a switch urgently for a job starting the next day, order the plain version and follow up with an engraved plate as a separate order.
Current switches are available in 316 brushed stainless steel only. The brushed stainless finish suits contemporary and architectural interiors and matches other stainless fittings and accessories. The engraved text reads clearly against the brushed grain. Additional finishes may be added to the range over time.
The 316 grade stainless steel plate is corrosion-resistant and suited to humid environments such as bathrooms. For outdoor or fully weatherproof applications, check the IP rating of the specific switch and box combination required for the installation. The current engraved range is not rated for direct outdoor exposure without an appropriate weatherproof enclosure.
Yes. For multi-unit developments, commercial fit-outs, or any project requiring multiple engraved switches with consistent wording, contact Sparky Direct before ordering. Contact Sparky Direct Customer Service with the quantity, switch type, and the text for each plate. Bulk engraving is easier to coordinate as a single production run, and the team can confirm lead times for larger orders.
Custom engraved stainless steel light switches are available from Sparky Direct, an Australian online electrical wholesaler operating since 2005. Sparky Direct engraves the switches in-house and ships Australia-wide. Enter your wording when you order, and the switch is engraved before dispatch.
Custom engraved light switches are available from Sparky Direct, an Australian online electrical wholesaler operating since 2005. Sparky Direct engraves the switches in-house and ships Australia-wide. Enter your custom wording when you order, and the switch is laser engraved before dispatch.