Dolly Only
"Cooker" Dolly Rocker | Clipsal Iconic STYL Dolly Rocker | Silver Shadow | S40CR-SH | Single buy
$3.61
$3.28 ex. GST
Search Results:
Search Results:
Search Results:
Search Results:
Find the best Clipsal Iconic Styl Silver Shadow here at Sparky Direct. [ Read More ]
Silver Shadow is one of the metallic finish options offered in the Clipsal Iconic Styl decorative range. The colour reads as a warm, dark metallic tone that sits between gunmetal and brushed bronze under typical interior lighting. It pairs with matching Silver Shadow dollies and dimmer knobs so a complete switch plate can be assembled in a single consistent finish.
The Silver Shadow line covers the components needed to finish a typical residential switch or power point installation. This includes 1, 2, 3, 4, 5 and 6 gang switch cover plates, double power point cover plates, the rotary dolly knob for fan controllers, and the dimmer knob for rotary dimmers. All are sold as skins or accessories that clip onto an existing Iconic mechanism and grid.
Clipsal Iconic uses a three-part system: a mechanism (the working part), a grid plate (the structural carrier), and a skin (the visible cover). Silver Shadow is a skin choice within the Styl decorative tier. The same Iconic mechanisms and grids and blank plates are used regardless of which decorative finish is selected.
Switches and power points sit at eye level on almost every wall in a home. They are touched daily and are visible from every angle. A standard white plate disappears against a white wall but stands out against feature paint, timber panelling, or stone. Choosing a finish that complements the wall and joinery turns a functional fitting into part of the design.
The mechanism is the part wired into the circuit. The grid plate is the white plastic frame that clips into the wall box and holds the mechanism. The cover plate, or skin, is the visible decorative layer that clips over the grid. Silver Shadow is a skin: it changes the look of the switch without changing how the switch is wired.
Silver Shadow has become a common specification on contemporary fit-outs because it bridges warm and cool palettes. The dark metallic tone sits comfortably with both warm timber finishes and cooler grey or charcoal joinery. That neutrality is why interior designers reach for it on projects where the rest of the material palette is mixed.
Dark metallics read as more considered than gloss black and warmer than brushed stainless. On a feature wall in deep green, navy, or charcoal paint, a Silver Shadow plate disappears into the surface rather than punching a white rectangle into the design. The metallic quality also catches incidental light, which adds depth without becoming a focal point.
Current residential trends lean toward muted earth tones, deep greens, soft blacks, and warm neutrals. Silver Shadow coordinates with all of these. It also works against natural stone, terrazzo, and mid-tone timbers without competing for attention.
The perceived quality of a finished room is often set by the small details: tap handles, door hardware, and switch plates. A metallic switch plate signals that the build budget extended to the trim, not just the structural finishes. Silver Shadow delivers that cue without the higher cost of full brass or bronze.
Silver Shadow suits hospitality fit-outs, boutique retail, modern apartments, and high-end home renovations. It also works well in dedicated rooms within a wider home: a media room, a study, a wine cellar, or a master ensuite. In these spaces, the finish becomes a deliberate point of difference from the rest of the house.
The Clipsal Iconic platform is built around interchangeable parts. Once the grid plate is installed, the visible finish can be changed without rewiring. This is the core advantage of the Iconic system and the reason Silver Shadow can be specified at any stage of a project.
A standard Iconic installation starts with a mechanism wired into the wall box. A grid plate clips over the mechanism. A decorative skin then clips over the grid. The skin can be changed years later by a single person without tools and without touching live wiring. Silver Shadow plates use the same clip system as every other Iconic skin.
A single Silver Shadow plate can sit alongside a Silver Shadow power point cover, a Silver Shadow dimmer, and matching dollies. Different gang configurations can be mixed across the same wall while keeping the finish consistent. This flexibility suits open-plan layouts where the kitchen wall might need a six-gang and the lounge wall a single switch.
Whole-home consistency is achievable because the Silver Shadow finish runs across switches, dimmers, fan controllers, and the matching Iconic Styl power point skin covers. This avoids the common problem of switches in one finish and outlets in another.
If interior tastes change in five years, the skins can be swapped to a different colour while the mechanism and wiring stay in place. This protects the electrical investment and avoids opening up walls for cosmetic updates.
A decorative finish is only useful if it performs well over years of daily use. Silver Shadow plates are designed to handle the wear that switches and power points see in busy households without showing fingerprints, scuffs, or fading.
The Iconic mechanism platform under a Silver Shadow skin is the same mechanism used across the entire Iconic range. It handles the rated load, switching cycles, and temperature ranges defined for residential and light commercial use. The decorative skin does not affect electrical performance.
Switch plates near entry doors, hallways, and bedside tables are touched many times each day. The Silver Shadow finish resists the marks and oil residue that show up quickly on glossy surfaces. The dark metallic tone hides incidental wear better than light or mirror finishes.
Silver Shadow plates wipe clean with a soft damp cloth. Abrasive cleaners and solvents should be avoided because they can dull the finish over time. A microfibre cloth removes fingerprints without leaving streaks.
Silver Shadow does not compromise function for appearance. The plates are dimensioned to the same standard as every other Iconic skin and clip into the same grid plates. There are no hidden trade-offs in switching feel, plate retention, or wall fit.
Selecting the right Silver Shadow components starts with understanding how many switches or outlets are needed at each location. The Iconic system supports almost any layout, but planning the gang count and accessory mix in advance saves rework later.
Silver Shadow cover plates are available from 1 gang up to 6 gang. A single switch position uses a 1 gang plate. A bank of switches at a kitchen entry might use a 4, 5, or 6 gang plate. The number of mechanisms behind the plate determines the gang count, so the wall box and grid must match.
Bedrooms typically need 1 or 2 gang plates near the door. Kitchens and living rooms often need 3 to 5 gang plates. Hallways with multiple light circuits may need 4 or 6 gang. Mapping the switch counts during the rough-in stage prevents undersized plates being ordered later.
Silver Shadow skins fit all standard Clipsal Iconic mechanisms and grids. This includes 10A switches, dimmer mechanisms, fan controllers, and connected (Wiser) mechanisms. The skin is finish-only and does not change which mechanism is installed underneath.
The most common mistake is ordering Silver Shadow skins to fit a non-Iconic switch series. Silver Shadow does not fit Clipsal Classic, Clipsal 2000, Clipsal Pro Series, or Clipsal Saturn ranges. It only fits the Iconic platform. Confirming the existing or specified series before ordering avoids returns.
Silver Shadow is one of several decorative options in the Iconic Styl range. Choosing between finishes comes down to wall colour, joinery, and the rest of the room's hardware palette.
Standard white plates suit white walls and budget-driven specifications. Silver Shadow is appropriate where the design brief calls for a feature finish or where the wall colour would make a white plate stand out as an unintended focal point. The price step up reflects the metallic skin.
The Iconic Styl range also includes Silver, Crowne, and Anthracite finishes among others. Silver is brighter and cooler. Crowne is a champagne-leaning metallic. Anthracite is closer to charcoal. Silver Shadow sits in the middle: dark enough to read as a feature, neutral enough to coordinate with most palettes.
The Clipsal Classic switch ranges and Clipsal Classic power points use a single-piece moulded plate. There is no skin layer to swap. The decorative options are limited compared to the Iconic platform. Iconic Styl Silver Shadow is designed for projects where the modular skin system is preferred.
| Factor | Silver Shadow Iconic Styl | Standard White Plates |
|---|---|---|
| Visual impact | Dark metallic feature finish | Neutral, recedes on white walls |
| Cost per plate | Higher (decorative tier) | Lower (standard tier) |
| Skin replaceable later | Yes, without rewiring | No, plate is integrated |
| Suits feature wall paint | Yes | Often clashes |
| Fingerprint visibility | Low (dark finish) | Higher (light surface) |
Silver Shadow is used across residential renovations, new builds, and commercial fit-outs where a darker decorative finish is part of the design language.
On a renovation, Silver Shadow can be specified room by room without committing the whole house to the finish. The modular skin system makes this practical. On a new build, a full house specification is straightforward because the same finish runs across all switches, dimmers, and outlets.
Kitchens often have the highest density of switches and outlets in a home. Silver Shadow plates against a stone or timber splashback look intentional rather than incidental. Feature walls in the lounge or master bedroom benefit from the same effect.
Boutique hotels, restaurants, and small offices use decorative switch finishes to support the branded interior. Silver Shadow suits venues with a darker, more sophisticated aesthetic. The plates handle the higher daily use typical of commercial environments.
Consistency across rooms is one of the strongest reasons to specify a single decorative finish. Silver Shadow runs across switches, dimmers, fan controllers, and power point covers, so a whole property can be finished in one tone without resorting to mixed brands or product families.
Switch plate finish is one of the last decisions made on a project, but it has a disproportionate visual impact. Coordinating Silver Shadow with the other hardware in the room produces a cohesive result.
Silver Shadow pairs well with brushed nickel handles, gunmetal tapware, and dark timber cabinetry. It contrasts cleanly with white walls and pale stone. Against light timber, the plate sits as a deliberate accent rather than blending in.
Where the tapware is brushed black or gunmetal, Silver Shadow keeps the metallic story consistent. Pendant lighting in dark or matte black finishes coordinates well. Against deep wall colours such as forest green or navy, Silver Shadow recedes; against lighter neutrals, it reads as a feature.
A consistent palette runs the same finish family across plumbing, lighting, and electrical fittings. Choosing Silver Shadow at the start of a project lets the rest of the hardware be selected to match, rather than the switches being a last-minute compromise.
Switch and outlet finishes are easy to overlook during the early design stages. Bringing the finish decision forward avoids the situation where the joinery and tapware are in one palette and the switches are in another. Specifying Silver Shadow upfront sets the tone for the rest of the trim selection.
Silver Shadow installation follows the standard Clipsal Iconic process. The decorative skin is the last component fitted, after the mechanism is wired and the grid plate is screwed to the wall box. All electrical work must be done by a licensed electrician under AS/NZS 3000:2018.
The gang count and switch positions should be set during the rough-in stage. Wall boxes, grid plates, and skins all need to match. Ordering Silver Shadow skins after rough-in is straightforward as long as the gang counts match what was installed.
The skin part number must match the grid plate gang count. A 4 gang Silver Shadow skin will not fit a 3 gang grid. The product code on each Silver Shadow skin includes the gang reference (for example, S3043C-SH is a 3 gang). Cross-checking the code against the grid avoids mismatches.
On renovations, the existing wall box position determines the grid gang count. On new builds, the gang counts are decided during the design stage. In both cases, ordering one or two spare Silver Shadow skins per project covers the occasional damaged plate without delaying handover.
A specified finish that is consistent across the project completes the design intent. Substituting a different finish part way through, or mixing Silver Shadow with another colour, undermines the visual consistency that justified the decorative tier in the first place.
Decorative switches sit at a higher price point than standard white plates. Understanding what the additional cost delivers helps frame whether Silver Shadow is the right choice for a given project.
The Silver Shadow finish requires additional manufacturing steps. The metallic skin is produced separately from the structural grid, which adds material and process cost. The result is a higher per-plate price than the equivalent white skin.
For most homes, decorative switches are specified in the rooms where they will be seen and used most: kitchen, living, master bedroom, ensuite. Other rooms can use standard white skins on the same Iconic platform to manage the overall budget without compromising the visible spaces.
On a property that will be sold or leased at a premium price point, decorative finishes contribute to the perceived quality. Silver Shadow on a feature wall adds value beyond the cost of the plate itself by signalling a complete finish specification.
Rental properties, garages, laundries, and back-of-house areas often do not justify the decorative tier. Standard white switches on the same Iconic platform make sense in these locations.
Silver Shadow prices vary by gang count and component type. Larger gang plates and complete switches cost more than single-gang skins. Understanding the pricing structure helps with project budgeting.
Australian pricing for Silver Shadow components reflects the decorative tier. Skin-only plates are priced per item, and dimmer knobs and dolly knobs are sold separately. Project totals depend on the mix of gang counts and accessories specified. Sparky Direct lists current prices on each product page.
For whole-house projects, ordering all Silver Shadow components in a single order avoids the freight cost of multiple deliveries. Buying for a single room is straightforward as individual item purchases.
Silver Shadow is a genuine Clipsal product. Generic look-alike plates do not fit the Iconic grid system reliably and often differ in finish tone. Sticking to genuine Clipsal stock avoids fit issues and warranty problems.
Online electrical wholesalers typically offer competitive pricing on Silver Shadow with broader stock availability than local trade counters. Sparky Direct stocks the Iconic Styl range with trade pricing for licensed electricians.
Stock holding varies by product code. Common gang counts and the dimmer knob sit in regular stock. Less common configurations may need to be confirmed before larger orders are placed.
The most efficient way to buy Silver Shadow is to confirm the full gang count list for the project, then order all skins, dollies, and knobs in one transaction. This avoids the common pitfalls of mismatched orders and finish variation between batches.
For each switch and power point position, list the gang count, mechanism type, and skin colour. A simple per-room schedule makes the order list straightforward and reduces the chance of missing a plate.
Silver Shadow dollies and dimmer knobs should be ordered alongside the matching skin plates. Fitting white dollies to a Silver Shadow skin defeats the purpose of the decorative finish. The matching Iconic dollies are available in Silver Shadow.
Three common mistakes show up regularly. First, ordering skins for a non-Iconic platform. Second, ordering the wrong gang count for the existing grid. Third, forgetting to order Silver Shadow dollies and ending up with white dollies on a Silver Shadow plate. All three are avoided by checking the part numbers against a written project list.
Sparky Direct stocks the Clipsal Iconic Styl range including Silver Shadow skins, dollies, and matching Iconic dimmers and timers components. Trade pricing applies on the catalogue. Questions on availability can be sent through the contact page.
Club Clipsal is Australia's largest electrician community offering trade rewards, business support, and exclusive benefits. When you nominate Sparky Direct as your preferred wholesaler, we automatically apply your Clipsal spend points to your Club Clipsal account daily.
Entry-level offering coaching, mentoring, and training discounts
Unlock exclusive industry tools and networking events
Access Toyota fleet offers and business software discounts
Maximum benefits, including VIP experiences and rewards
1. Sign Up: Create your Club Clipsal account at clipsal.com/club-clipsal or via the iCat mobile app
2. Nominate Sparky Direct: Select Sparky Direct from the wholesaler dropdown menu in your profile
3. Add Email: Enter your Sparky Direct account email address in the membership number field
4. Start Earning: Every dollar spent on Clipsal products earns points automatically
Redeem points from the rewards store, including gift cards, tools, and experiences. Access business summits, product training, and industry networking events. Receive early access to new product launches and special promotions. Connect with fellow electricians via the Club Clipsal community app.
Watch "Dimmer Knob Silver Shadow" | Clipsal Iconic STYL | S40EDIMKB-SH | Single buy video
Watch Clipsal Iconic STYL Double Switched Internal Power Point Cover Plate Silver Shadow | S3025C-SH video
Watch Clipsal Iconic STYL S3041C-SH | 1 Gang Switch Cover Plate | Silver Shadow | (Skin Only) video
I needed some of the coloured coloured ‘dolly rockers’ from the Clipsal Iconic range - but they weren’t retailed individually on Sparky Direct. So, by purchasing the 6-gang switch, I got 6 dollies , at a way more cost-effective price. Pity I can’t order individuals; but am happy for this work-around.
only black knob for the iconic series, would be nice to have this design the same as the white style.
Metal plates are a step above the standard plastic plates to give the room a high end feel.
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Clipsal Iconic Styl Silver Shadow → Get Expert Advice →Yes, they install in the same way as other Clipsal Iconic products.
Sparky Direct supplies Silver Shadow Clipsal Iconic Styl switches Australia-wide, offering premium Iconic solutions with convenient delivery.
They are securely packaged and delivered via standard courier services.
Unused products are generally eligible for return according to the seller’s returns policy.
Warranty coverage varies by product and manufacturer and typically covers defects in materials or workmanship.
Yes, Silver Shadow products are typically sold as individual units or components.
Yes, selecting the correct product type ensures the right function and appearance.
Yes, it is designed to coordinate within the Styl range and modern interiors.
They are visible but designed to be refined rather than overpowering.
Yes, their smooth finish allows for easy cleaning with a soft cloth.
No, switch operation is the same as standard Clipsal Iconic products.
Yes, it is often selected for renovations and design-led upgrades.
Yes, it can be used consistently across rooms for a cohesive design.
Silver Shadow is a colour finish within the Clipsal Iconic Styl range, offering a soft metallic grey appearance across compatible Iconic products.
Yes, it complements contemporary, minimalist, and architectural interior styles.
They provide a subtle, premium finish while retaining the flexibility of the Iconic system.
Yes, they are designed for everyday use and long-term reliability.
Silver Shadow offers a muted metallic look that provides a more premium and design-focused appearance.
Yes, availability depends on the switch, dimmer, or control type within the Styl range.
Yes, they are designed to work with standard Clipsal Iconic components.
Yes, they are suitable for residential and light commercial applications.
Yes, they are commonly used in residential homes and apartments.
Yes, when installed correctly, they meet relevant AS/NZS electrical and safety standards.
Yes, Silver Shadow products are designed to integrate fully with the Clipsal Iconic platform.
Silver Shadow is available across compatible Clipsal Iconic Styl switches, controls, and related accessories within the Iconic system.
